[PATCH] ARM: dts: r8a7790: Add TPU device node

[PATCH] ARM: dts: r8a7790: Add TPU device node

[Geert Uytterhoeven]

Add support for the 4 PWM channels provided by the 16-bit Timer Pulse
Unit on R-Car H2, by adding a device node describing the TPU.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Tested with PWM sysfs and a logic analyzer on the Lager development
board using DT overlays available from [1].

To be queued in renesas-devel-for-v6.4.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/log/?h=topic/renesas-overlays

 arch/arm/boot/dts/r8a7790.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 2f2e483a2c2ac7f1..7211a5bb18a3b3df 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -376,6 +376,17 @@ pfc: pinctrl@e6060000 {
 			reg = <0 0xe6060000 0 0x250>;
 		};
 
+		tpu: pwm@e60f0000 {
+			compatible = "renesas,tpu-r8a7790", "renesas,tpu";
+			reg = <0 0xe60f0000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		cpg: clock-controller@e6150000 {
 			compatible = "renesas,r8a7790-cpg-mssr";
 			reg = <0 0xe6150000 0 0x1000>;
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel