linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Auger Eric <eric.auger@redhat.com>
To: Jean-Philippe Brucker <jean-philippe@linaro.org>,
	iommu@lists.linux-foundation.org,
	linux-arm-kernel@lists.infradead.org, linux-mm@kvack.org
Cc: fenghua.yu@intel.com, will@kernel.org, zhengxiang9@huawei.com,
	catalin.marinas@arm.com, zhangfei.gao@linaro.org,
	robin.murphy@arm.com
Subject: Re: [PATCH RESEND v9 09/13] iommu/arm-smmu-v3: Seize private ASID
Date: Mon, 7 Sep 2020 18:41:11 +0200	[thread overview]
Message-ID: <7a67022c-a33a-5ea1-1bfb-4154d83ca009@redhat.com> (raw)
In-Reply-To: <20200817171558.325917-10-jean-philippe@linaro.org>

Hi Jean,

On 8/17/20 7:15 PM, Jean-Philippe Brucker wrote:
> The SMMU has a single ASID space, the union of shared and private ASID
> sets. This means that the SMMU driver competes with the arch allocator
> for ASIDs. Shared ASIDs are those of Linux processes, allocated by the
> arch, and contribute in broadcast TLB maintenance. Private ASIDs are
> allocated by the SMMU driver and used for "classic" map/unmap DMA. They
> require command-queue TLB invalidations.
> 
> When we pin down an mm_context and get an ASID that is already in use by
> the SMMU, it belongs to a private context. We used to simply abort the
> bind, but this is unfair to users that would be unable to bind a few
> seemingly random processes. Try to allocate a new private ASID for the
> context, and make the old ASID shared.
> 
> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
> ---
>  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h   |  3 ++
>  .../iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c   | 36 +++++++++++++++++--
>  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c   | 34 +++++++++++-------
>  3 files changed, 58 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
> index 6b06a6f19604..90c08f156b43 100644
> --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
> +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
> @@ -678,6 +678,9 @@ struct arm_smmu_domain {
>  extern struct xarray arm_smmu_asid_xa;
>  extern struct mutex arm_smmu_asid_lock;
>  
> +int arm_smmu_write_ctx_desc(struct arm_smmu_domain *smmu_domain, int ssid,
> +			    struct arm_smmu_ctx_desc *cd);
> +void arm_smmu_tlb_inv_asid(struct arm_smmu_device *smmu, u16 asid);
>  bool arm_smmu_free_asid(struct arm_smmu_ctx_desc *cd);
>  
>  #endif /* _ARM_SMMU_V3_H */
> diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> index 7a4f40565e06..e919ce894dd1 100644
> --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> @@ -10,10 +10,19 @@
>  #include "arm-smmu-v3.h"
>  #include "../../io-pgtable-arm.h"
>  
> +/*
> + * Try to reserve this ASID in the SMMU. If it is in use, try to steal it from
> + * the private entry. Careful here, we may be modifying the context tables of
> + * another SMMU!
Not sure I got what you meant by this comment.
> + */
>  static struct arm_smmu_ctx_desc *
>  arm_smmu_share_asid(struct mm_struct *mm, u16 asid)
>  {
> +	int ret;
> +	u32 new_asid;
>  	struct arm_smmu_ctx_desc *cd;
> +	struct arm_smmu_device *smmu;
> +	struct arm_smmu_domain *smmu_domain;
>  
>  	cd = xa_load(&arm_smmu_asid_xa, asid);
>  	if (!cd)
> @@ -27,8 +36,31 @@ arm_smmu_share_asid(struct mm_struct *mm, u16 asid)
>  		return cd;
>  	}
>  
> -	/* Ouch, ASID is already in use for a private cd. */
> -	return ERR_PTR(-EBUSY);
> +	smmu_domain = container_of(cd, struct arm_smmu_domain, s1_cfg.cd);
> +	smmu = smmu_domain->smmu;
> +
> +	ret = xa_alloc(&arm_smmu_asid_xa, &new_asid, cd,
> +		       XA_LIMIT(1, 1 << smmu->asid_bits), GFP_KERNEL);
XA_LIMIT(1, (1 << smmu->asid_bits) - 1), GFP_KERNEL)
> +	if (ret)
> +		return ERR_PTR(-ENOSPC);
> +	/*
> +	 * Race with unmap: TLB invalidations will start targeting the new ASID,
> +	 * which isn't assigned yet. We'll do an invalidate-all on the old ASID
> +	 * later, so it doesn't matter.
> +	 */
> +	cd->asid = new_asid;
> +	/*
> +	 * Update ASID and invalidate CD in all associated masters. There will
> +	 * be some overlap between use of both ASIDs, until we invalidate the
> +	 * TLB.
> +	 */
> +	arm_smmu_write_ctx_desc(smmu_domain, 0, cd);
> +
> +	/* Invalidate TLB entries previously associated with that context */
> +	arm_smmu_tlb_inv_asid(smmu, asid);
> +
> +	xa_erase(&arm_smmu_asid_xa, asid);
> +	return NULL;
>  }
>  
>  __maybe_unused
> diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
> index 9e81615744de..9e755caea525 100644
> --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
> +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
> @@ -873,6 +873,17 @@ static int arm_smmu_cmdq_batch_submit(struct arm_smmu_device *smmu,
>  }
>  
>  /* Context descriptor manipulation functions */
> +void arm_smmu_tlb_inv_asid(struct arm_smmu_device *smmu, u16 asid)
> +{
> +	struct arm_smmu_cmdq_ent cmd = {
> +		.opcode = CMDQ_OP_TLBI_NH_ASID,
> +		.tlbi.asid = asid,
> +	};
> +
> +	arm_smmu_cmdq_issue_cmd(smmu, &cmd);
> +	arm_smmu_cmdq_issue_sync(smmu);
> +}
> +
>  static void arm_smmu_sync_cd(struct arm_smmu_domain *smmu_domain,
>  			     int ssid, bool leaf)
>  {
> @@ -953,8 +964,8 @@ static __le64 *arm_smmu_get_cd_ptr(struct arm_smmu_domain *smmu_domain,
>  	return l1_desc->l2ptr + idx * CTXDESC_CD_DWORDS;
>  }
>  
> -static int arm_smmu_write_ctx_desc(struct arm_smmu_domain *smmu_domain,
> -				   int ssid, struct arm_smmu_ctx_desc *cd)
> +int arm_smmu_write_ctx_desc(struct arm_smmu_domain *smmu_domain, int ssid,
> +			    struct arm_smmu_ctx_desc *cd)
>  {
>  	/*
>  	 * This function handles the following cases:
> @@ -1610,15 +1621,6 @@ static void arm_smmu_tlb_inv_context(void *cookie)
>  	struct arm_smmu_device *smmu = smmu_domain->smmu;
>  	struct arm_smmu_cmdq_ent cmd;
>  
> -	if (smmu_domain->stage == ARM_SMMU_DOMAIN_S1) {
> -		cmd.opcode	= CMDQ_OP_TLBI_NH_ASID;
> -		cmd.tlbi.asid	= smmu_domain->s1_cfg.cd.asid;
> -		cmd.tlbi.vmid	= 0;
> -	} else {
> -		cmd.opcode	= CMDQ_OP_TLBI_S12_VMALL;
> -		cmd.tlbi.vmid	= smmu_domain->s2_cfg.vmid;
> -	}
> -
>  	/*
>  	 * NOTE: when io-pgtable is in non-strict mode, we may get here with
>  	 * PTEs previously cleared by unmaps on the current CPU not yet visible
> @@ -1626,8 +1628,14 @@ static void arm_smmu_tlb_inv_context(void *cookie)
>  	 * insertion to guarantee those are observed before the TLBI. Do be
>  	 * careful, 007.
>  	 */
> -	arm_smmu_cmdq_issue_cmd(smmu, &cmd);
> -	arm_smmu_cmdq_issue_sync(smmu);
> +	if (smmu_domain->stage == ARM_SMMU_DOMAIN_S1) {
> +		arm_smmu_tlb_inv_asid(smmu, smmu_domain->s1_cfg.cd.asid);
> +	} else {
> +		cmd.opcode	= CMDQ_OP_TLBI_S12_VMALL;
> +		cmd.tlbi.vmid	= smmu_domain->s2_cfg.vmid;
> +		arm_smmu_cmdq_issue_cmd(smmu, &cmd);
> +		arm_smmu_cmdq_issue_sync(smmu);
> +	}
>  	arm_smmu_atc_inv_domain(smmu_domain, 0, 0, 0);
>  }
>  
> 

Thanks

Eric


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-09-07 17:46 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-17 17:15 [PATCH RESEND v9 00/13] iommu: Shared Virtual Addressing for SMMUv3 (PT sharing part) Jean-Philippe Brucker
2020-08-17 17:15 ` [PATCH RESEND v9 01/13] mm: Define pasid in mm Jean-Philippe Brucker
2020-08-17 17:15 ` [PATCH RESEND v9 02/13] iommu/ioasid: Add ioasid references Jean-Philippe Brucker
2020-09-08  9:52   ` Auger Eric
2020-08-17 17:15 ` [PATCH RESEND v9 03/13] iommu/sva: Add PASID helpers Jean-Philippe Brucker
2020-09-08  7:45   ` Auger Eric
2020-09-17 14:36     ` Jean-Philippe Brucker
2020-08-17 17:15 ` [PATCH RESEND v9 04/13] arm64: mm: Pin down ASIDs for sharing mm with devices Jean-Philippe Brucker
2020-08-17 17:15 ` [PATCH RESEND v9 05/13] iommu/io-pgtable-arm: Move some definitions to a header Jean-Philippe Brucker
2020-08-17 17:15 ` [PATCH RESEND v9 06/13] arm64: cpufeature: Export symbol read_sanitised_ftr_reg() Jean-Philippe Brucker
2020-08-17 17:15 ` [PATCH RESEND v9 07/13] iommu/arm-smmu-v3: Move definitions to a header Jean-Philippe Brucker
2020-09-08  9:16   ` Auger Eric
2020-08-17 17:15 ` [PATCH RESEND v9 08/13] iommu/arm-smmu-v3: Share process page tables Jean-Philippe Brucker
2020-09-08  7:41   ` Auger Eric
2020-09-17 14:37     ` Jean-Philippe Brucker
2020-08-17 17:15 ` [PATCH RESEND v9 09/13] iommu/arm-smmu-v3: Seize private ASID Jean-Philippe Brucker
2020-09-07 16:41   ` Auger Eric [this message]
2020-09-17 14:38     ` Jean-Philippe Brucker
2020-08-17 17:15 ` [PATCH RESEND v9 10/13] iommu/arm-smmu-v3: Check for SVA features Jean-Philippe Brucker
2020-09-08  9:38   ` Auger Eric
2020-09-17 14:39     ` Jean-Philippe Brucker
2020-08-17 17:15 ` [PATCH RESEND v9 11/13] iommu/arm-smmu-v3: Add SVA device feature Jean-Philippe Brucker
2020-09-08  9:46   ` Auger Eric
2020-09-17 14:40     ` Jean-Philippe Brucker
2020-08-17 17:15 ` [PATCH RESEND v9 12/13] iommu/arm-smmu-v3: Implement iommu_sva_bind/unbind() Jean-Philippe Brucker
2020-08-17 17:15 ` [PATCH RESEND v9 13/13] iommu/arm-smmu-v3: Hook up ATC invalidation to mm ops Jean-Philippe Brucker
2020-09-04  9:08 ` [PATCH RESEND v9 00/13] iommu: Shared Virtual Addressing for SMMUv3 (PT sharing part) Joerg Roedel
2020-09-17 14:36   ` Jean-Philippe Brucker

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7a67022c-a33a-5ea1-1bfb-4154d83ca009@redhat.com \
    --to=eric.auger@redhat.com \
    --cc=catalin.marinas@arm.com \
    --cc=fenghua.yu@intel.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jean-philippe@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mm@kvack.org \
    --cc=robin.murphy@arm.com \
    --cc=will@kernel.org \
    --cc=zhangfei.gao@linaro.org \
    --cc=zhengxiang9@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).