Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v4 0/6] Add support of New Amlogic temperature sensor for G12 SoCs
@ 2019-08-21 22:24 Guillaume La Roque
  2019-08-21 22:24 ` [PATCH v4 1/6] dt-bindings: thermal: Add DT bindings documentation for Amlogic Thermal Guillaume La Roque
                   ` (6 more replies)
  0 siblings, 7 replies; 16+ messages in thread
From: Guillaume La Roque @ 2019-08-21 22:24 UTC (permalink / raw)
  To: rui.zhang, edubezval, daniel.lezcano
  Cc: devicetree, linux-amlogic, linux-kernel, linux-arm-kernel, linux-pm

This patchs series add support of New Amlogic temperature sensor and minimal
thermal zone for SEI510 and ODROID-N2 boards.

First implementation was doing on IIO[1] but after comments i move on thermal framework.
Formulas and calibration values come from amlogic.

Changes since v3:
  - Add cooling map and trip point for hot type
  - move compatible on g12a instead of g12 to be aligned with others
  - add all reviewer, sorry for this mistake

Changes since v2:
  - fix yaml documention
  - remove unneeded status variable for temperature-sensor node
  - rework driver after Martin review
  - add some information in commit message

Changes since v1:
  - fix enum vs const in documentation
  - fix error with thermal-sensor-cells value set to 1 instead of 0
  - add some dependencies needed to add cooling-maps

Dependencies :
- patch 3,4 & 5: depends on Neil's patch and series :
              - missing dwc2 phy-names[2]
              - patchsets to add DVFS on G12a[3] which have deps on [4] and [5]

[1] https://lore.kernel.org/linux-amlogic/20190604144714.2009-1-glaroque@baylibre.com/
[2] https://lore.kernel.org/linux-amlogic/20190625123647.26117-1-narmstrong@baylibre.com/
[3] https://lore.kernel.org/linux-amlogic/20190729132622.7566-1-narmstrong@baylibre.com/
[4] https://lore.kernel.org/linux-amlogic/20190731084019.8451-5-narmstrong@baylibre.com/
[5] https://lore.kernel.org/linux-amlogic/20190729132622.7566-3-narmstrong@baylibre.com/


Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>

Guillaume La Roque (6):
  dt-bindings: thermal: Add DT bindings documentation for Amlogic
    Thermal
  thermal: amlogic: Add thermal driver to support G12 SoCs
  arm64: dts: amlogic: g12: add temperature sensor
  arm64: dts: meson: sei510: Add minimal thermal zone
  arm64: dts: amlogic: odroid-n2: add minimal thermal zone
  MAINTAINERS: add entry for Amlogic Thermal driver

 .../bindings/thermal/amlogic,thermal.yaml     |  54 +++
 MAINTAINERS                                   |   9 +
 .../boot/dts/amlogic/meson-g12-common.dtsi    |  20 ++
 .../boot/dts/amlogic/meson-g12a-sei510.dts    |  70 ++++
 .../boot/dts/amlogic/meson-g12b-odroid-n2.dts |  76 ++++
 drivers/thermal/Kconfig                       |  11 +
 drivers/thermal/Makefile                      |   1 +
 drivers/thermal/amlogic_thermal.c             | 335 ++++++++++++++++++
 8 files changed, 576 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
 create mode 100644 drivers/thermal/amlogic_thermal.c

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v4 1/6] dt-bindings: thermal: Add DT bindings documentation for Amlogic Thermal
  2019-08-21 22:24 [PATCH v4 0/6] Add support of New Amlogic temperature sensor for G12 SoCs Guillaume La Roque
@ 2019-08-21 22:24 ` Guillaume La Roque
  2019-08-21 23:40   ` Kevin Hilman
  2019-09-13 10:41   ` Amit Kucheria
  2019-08-21 22:24 ` [PATCH v4 2/6] thermal: amlogic: Add thermal driver to support G12 SoCs Guillaume La Roque
                   ` (5 subsequent siblings)
  6 siblings, 2 replies; 16+ messages in thread
From: Guillaume La Roque @ 2019-08-21 22:24 UTC (permalink / raw)
  To: rui.zhang, edubezval, daniel.lezcano
  Cc: devicetree, linux-amlogic, linux-kernel, linux-arm-kernel, linux-pm

Adding the devicetree binding documentation for the Amlogic temperature
sensor found in the Amlogic Meson G12 SoCs.
the G12A  and G12B SoCs are supported.

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/thermal/amlogic,thermal.yaml     | 54 +++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml

diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
new file mode 100644
index 000000000000..f761681e4c0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/amlogic,thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Thermal
+
+maintainers:
+  - Guillaume La Roque <glaroque@baylibre.com>
+
+description: Binding for Amlogic Thermal
+
+properties:
+  compatible:
+      items:
+        - enum:
+            - amlogic,g12a-cpu-thermal
+            - amlogic,g12a-ddr-thermal
+        - const: amlogic,g12a-thermal
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  amlogic,ao-secure:
+    description: phandle to the ao-secure syscon
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - amlogic,ao-secure
+
+examples:
+  - |
+        cpu_temp: temperature-sensor@ff634800 {
+                compatible = "amlogic,g12a-cpu-thermal",
+                             "amlogic,g12a-thermal";
+                reg = <0xff634800 0x50>;
+                interrupts = <0x0 0x24 0x0>;
+                clocks = <&clk 164>;
+                #thermal-sensor-cells = <0>;
+                amlogic,ao-secure = <&sec_AO>;
+        };
+...
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v4 2/6] thermal: amlogic: Add thermal driver to support G12 SoCs
  2019-08-21 22:24 [PATCH v4 0/6] Add support of New Amlogic temperature sensor for G12 SoCs Guillaume La Roque
  2019-08-21 22:24 ` [PATCH v4 1/6] dt-bindings: thermal: Add DT bindings documentation for Amlogic Thermal Guillaume La Roque
@ 2019-08-21 22:24 ` Guillaume La Roque
  2019-08-29 18:11   ` Kevin Hilman
  2019-09-13  9:21   ` Amit Kucheria
  2019-08-21 22:24 ` [PATCH v4 3/6] arm64: dts: amlogic: g12: add temperature sensor Guillaume La Roque
                   ` (4 subsequent siblings)
  6 siblings, 2 replies; 16+ messages in thread
From: Guillaume La Roque @ 2019-08-21 22:24 UTC (permalink / raw)
  To: rui.zhang, edubezval, daniel.lezcano
  Cc: devicetree, linux-amlogic, linux-kernel, linux-arm-kernel, linux-pm

Amlogic G12A and G12B SoCs integrate two thermal sensors
with the same design.
One is located close to the DDR controller and the other one is
located close to the PLLs (between the CPU and GPU).

The calibration data for each of the thermal sensors instance is
stored in a different location within the AO region.

Implement reading the temperature from each thermal sensor.

The IP block has more functionality, which may be added to this driver
in the future:
- chip reset when the temperature exceeds a configurable threshold
- up to four interrupts when the temperature has risen above a
configurable threshold
- up to four interrupts when the temperature has fallen below a
configurable threshold

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
---
 drivers/thermal/Kconfig           |  11 +
 drivers/thermal/Makefile          |   1 +
 drivers/thermal/amlogic_thermal.c | 335 ++++++++++++++++++++++++++++++
 3 files changed, 347 insertions(+)
 create mode 100644 drivers/thermal/amlogic_thermal.c

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 9966364a6deb..0f31bb4bc372 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -348,6 +348,17 @@ config MTK_THERMAL
 	  Enable this option if you want to have support for thermal management
 	  controller present in Mediatek SoCs
 
+config AMLOGIC_THERMAL
+	tristate "Amlogic Thermal Support"
+	default ARCH_MESON
+	depends on OF && ARCH_MESON
+	help
+	  If you say yes here you get support for Amlogic Thermal
+	  for G12 SoC Family.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called amlogic_thermal.
+
 menu "Intel thermal drivers"
 depends on X86 || X86_INTEL_QUARK || COMPILE_TEST
 source "drivers/thermal/intel/Kconfig"
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 74a37c7f847a..baeb70bf0568 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -54,3 +54,4 @@ obj-$(CONFIG_MTK_THERMAL)	+= mtk_thermal.o
 obj-$(CONFIG_GENERIC_ADC_THERMAL)	+= thermal-generic-adc.o
 obj-$(CONFIG_ZX2967_THERMAL)	+= zx2967_thermal.o
 obj-$(CONFIG_UNIPHIER_THERMAL)	+= uniphier_thermal.o
+obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c
new file mode 100644
index 000000000000..173d808048d2
--- /dev/null
+++ b/drivers/thermal/amlogic_thermal.c
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic Thermal Sensor Driver
+ *
+ * Copyright (C) 2017 Huan Biao <huan.biao@amlogic.com>
+ * Copyright (C) 2019 Guillaume La Roque <glaroque@baylibre.com>
+ *
+ * Register value to celsius temperature formulas:
+ *	Read_Val	    m * U
+ * U = ---------, Uptat = ---------
+ *	2^16		  1 + n * U
+ *
+ * Temperature = A * ( Uptat + u_efuse / 2^16 )- B
+ *
+ *  A B m n : calibration parameters
+ *  u_efuse : fused calibration value, it's a signed 16 bits value
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/thermal.h>
+
+#include "thermal_core.h"
+
+#define TSENSOR_CFG_REG1			0x4
+	#define TSENSOR_CFG_REG1_RSET_VBG	BIT(12)
+	#define TSENSOR_CFG_REG1_RSET_ADC	BIT(11)
+	#define TSENSOR_CFG_REG1_VCM_EN		BIT(10)
+	#define TSENSOR_CFG_REG1_VBG_EN		BIT(9)
+	#define TSENSOR_CFG_REG1_OUT_CTL	BIT(6)
+	#define TSENSOR_CFG_REG1_FILTER_EN	BIT(5)
+	#define TSENSOR_CFG_REG1_DEM_EN		BIT(3)
+	#define TSENSOR_CFG_REG1_CH_SEL		GENMASK(1, 0)
+	#define TSENSOR_CFG_REG1_ENABLE		\
+		(TSENSOR_CFG_REG1_FILTER_EN |	\
+		 TSENSOR_CFG_REG1_VCM_EN |	\
+		 TSENSOR_CFG_REG1_VBG_EN |	\
+		 TSENSOR_CFG_REG1_DEM_EN |	\
+		 TSENSOR_CFG_REG1_CH_SEL)
+
+#define TSENSOR_STAT0			0x40
+
+#define TSENSOR_STAT9			0x64
+
+#define TSENSOR_READ_TEMP_MASK		GENMASK(15, 0)
+#define TSENSOR_TEMP_MASK		GENMASK(11, 0)
+
+#define TSENSOR_TRIM_SIGN_MASK		BIT(15)
+#define TSENSOR_TRIM_TEMP_MASK		GENMASK(14, 0)
+#define TSENSOR_TRIM_VERSION_MASK	GENMASK(31, 24)
+
+#define TSENSOR_TRIM_VERSION(_version)	\
+	FIELD_GET(TSENSOR_TRIM_VERSION_MASK, _version)
+
+#define TSENSOR_TRIM_CALIB_VALID_MASK	(GENMASK(3, 2) | BIT(7))
+
+#define TSENSOR_CALIB_OFFSET	1
+#define TSENSOR_CALIB_SHIFT	4
+
+/**
+ * struct amlogic_thermal_soc_calib_data
+ * @A, B, m, n: calibration parameters
+ * This structure is required for configuration of amlogic thermal driver.
+ */
+struct amlogic_thermal_soc_calib_data {
+	int A;
+	int B;
+	int m;
+	int n;
+};
+
+/**
+ * struct amlogic_thermal_data
+ * @u_efuse_off: register offset to read fused calibration value
+ * @soc: calibration parameters structure pointer
+ * @regmap_config: regmap config for the device
+ * This structure is required for configuration of amlogic thermal driver.
+ */
+struct amlogic_thermal_data {
+	int u_efuse_off;
+	const struct amlogic_thermal_soc_calib_data *calibration_parameters;
+	const struct regmap_config *regmap_config;
+};
+
+struct amlogic_thermal {
+	struct platform_device *pdev;
+	const struct amlogic_thermal_data *data;
+	struct regmap *regmap;
+	struct regmap *sec_ao_map;
+	struct clk *clk;
+	struct thermal_zone_device *tzd;
+	u32 trim_info;
+};
+
+/*
+ * Calculate a temperature value from a temperature code.
+ * The unit of the temperature is degree milliCelsius.
+ */
+static int amlogic_thermal_code_to_millicelsius(struct amlogic_thermal *pdata,
+						int temp_code)
+{
+	const struct amlogic_thermal_soc_calib_data *param =
+					pdata->data->calibration_parameters;
+	int temp;
+	s64 factor, Uptat, uefuse;
+
+	uefuse = pdata->trim_info & TSENSOR_TRIM_SIGN_MASK ?
+			     ~(pdata->trim_info & TSENSOR_TRIM_TEMP_MASK) + 1 :
+			     (pdata->trim_info & TSENSOR_TRIM_TEMP_MASK);
+
+	factor = param->n * temp_code;
+	factor = div_s64(factor, 100);
+
+	Uptat = temp_code * param->m;
+	Uptat = div_s64(Uptat, 100);
+	Uptat = Uptat * BIT(16);
+	Uptat = div_s64(Uptat, BIT(16) + factor);
+
+	temp = (Uptat + uefuse) * param->A;
+	temp = div_s64(temp, BIT(16));
+	temp = (temp - param->B) * 100;
+
+	return temp;
+}
+
+static int amlogic_thermal_initialize(struct amlogic_thermal *pdata)
+{
+	int ret = 0;
+	int ver;
+
+	regmap_read(pdata->sec_ao_map, pdata->data->u_efuse_off,
+		    &pdata->trim_info);
+
+	ver = TSENSOR_TRIM_VERSION(pdata->trim_info);
+
+	if ((ver & TSENSOR_TRIM_CALIB_VALID_MASK) == 0) {
+		ret = -EINVAL;
+		dev_err(&pdata->pdev->dev,
+			"tsensor thermal calibration not supported: 0x%x!\n",
+			ver);
+	}
+
+	return ret;
+}
+
+static int amlogic_thermal_enable(struct amlogic_thermal *data)
+{
+	int ret;
+
+	ret = clk_prepare_enable(data->clk);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(data->regmap, TSENSOR_CFG_REG1,
+			   TSENSOR_CFG_REG1_ENABLE, TSENSOR_CFG_REG1_ENABLE);
+
+	return 0;
+}
+
+static int amlogic_thermal_disable(struct amlogic_thermal *data)
+{
+	regmap_update_bits(data->regmap, TSENSOR_CFG_REG1,
+			   TSENSOR_CFG_REG1_ENABLE, 0);
+	clk_disable_unprepare(data->clk);
+
+	return 0;
+}
+
+static int amlogic_thermal_get_temp(void *data, int *temp)
+{
+	unsigned int tval;
+	struct amlogic_thermal *pdata = data;
+
+	if (!data)
+		return -EINVAL;
+
+	regmap_read(pdata->regmap, TSENSOR_STAT0, &tval);
+	*temp =
+	   amlogic_thermal_code_to_millicelsius(pdata,
+						tval & TSENSOR_READ_TEMP_MASK);
+
+	return 0;
+}
+
+static const struct thermal_zone_of_device_ops amlogic_thermal_ops = {
+	.get_temp	= amlogic_thermal_get_temp,
+};
+
+static const struct regmap_config amlogic_thermal_regmap_config_g12a = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = TSENSOR_STAT9,
+};
+
+static const struct amlogic_thermal_soc_calib_data amlogic_thermal_g12a = {
+	.A = 9411,
+	.B = 3159,
+	.m = 424,
+	.n = 324,
+};
+
+static const struct amlogic_thermal_data amlogic_thermal_g12a_cpu_param = {
+	.u_efuse_off = 0x128,
+	.calibration_parameters = &amlogic_thermal_g12a,
+	.regmap_config = &amlogic_thermal_regmap_config_g12a,
+};
+
+static const struct amlogic_thermal_data amlogic_thermal_g12a_ddr_param = {
+	.u_efuse_off = 0xf0,
+	.calibration_parameters = &amlogic_thermal_g12a,
+	.regmap_config = &amlogic_thermal_regmap_config_g12a,
+};
+
+static const struct of_device_id of_amlogic_thermal_match[] = {
+	{
+		.compatible = "amlogic,g12a-ddr-thermal",
+		.data = &amlogic_thermal_g12a_ddr_param,
+	},
+	{
+		.compatible = "amlogic,g12a-cpu-thermal",
+		.data = &amlogic_thermal_g12a_cpu_param,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_amlogic_thermal_match);
+
+static int amlogic_thermal_probe(struct platform_device *pdev)
+{
+	struct amlogic_thermal *pdata;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	void __iomem *base;
+	int ret;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	pdata->data = of_device_get_match_data(dev);
+	pdata->pdev = pdev;
+	platform_set_drvdata(pdev, pdata);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base)) {
+		dev_err(dev, "failed to get io address\n");
+		return PTR_ERR(base);
+	}
+
+	pdata->regmap = devm_regmap_init_mmio(dev, base,
+					      pdata->data->regmap_config);
+	if (IS_ERR(pdata->regmap))
+		return PTR_ERR(pdata->regmap);
+
+	pdata->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(pdata->clk)) {
+		if (PTR_ERR(pdata->clk) != -EPROBE_DEFER)
+			dev_err(dev, "failed to get clock\n");
+		return PTR_ERR(pdata->clk);
+	}
+
+	pdata->sec_ao_map = syscon_regmap_lookup_by_phandle
+		(pdev->dev.of_node, "amlogic,ao-secure");
+	if (IS_ERR(pdata->sec_ao_map)) {
+		dev_err(dev, "syscon regmap lookup failed.\n");
+		return PTR_ERR(pdata->sec_ao_map);
+	}
+
+	pdata->tzd = devm_thermal_zone_of_sensor_register(&pdev->dev,
+							  0,
+							  pdata,
+							  &amlogic_thermal_ops);
+	if (IS_ERR(pdata->tzd)) {
+		ret = PTR_ERR(pdata->tzd);
+		dev_err(dev, "Failed to register tsensor: %d\n", ret);
+		return PTR_ERR(pdata->tzd);
+	}
+
+	ret = amlogic_thermal_initialize(pdata);
+	if (ret)
+		return ret;
+
+	ret = amlogic_thermal_enable(pdata);
+
+	return ret;
+}
+
+static int amlogic_thermal_remove(struct platform_device *pdev)
+{
+	struct amlogic_thermal *data = platform_get_drvdata(pdev);
+
+	return amlogic_thermal_disable(data);
+}
+
+static int __maybe_unused amlogic_thermal_suspend(struct device *dev)
+{
+	struct amlogic_thermal *data = dev_get_drvdata(dev);
+
+	return amlogic_thermal_disable(data);
+}
+
+static int __maybe_unused amlogic_thermal_resume(struct device *dev)
+{
+	struct amlogic_thermal *data = dev_get_drvdata(dev);
+
+	return amlogic_thermal_enable(data);
+}
+
+static SIMPLE_DEV_PM_OPS(amlogic_thermal_pm_ops,
+			 amlogic_thermal_suspend, amlogic_thermal_resume);
+
+static struct platform_driver amlogic_thermal_driver = {
+	.driver = {
+		.name		= "amlogic_thermal",
+		.pm		= &amlogic_thermal_pm_ops,
+		.of_match_table = of_amlogic_thermal_match,
+	},
+	.probe	= amlogic_thermal_probe,
+	.remove	= amlogic_thermal_remove,
+};
+
+module_platform_driver(amlogic_thermal_driver);
+
+MODULE_AUTHOR("Guillaume La Roque <glaroque@baylibre.com>");
+MODULE_DESCRIPTION("Amlogic thermal driver");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v4 3/6] arm64: dts: amlogic: g12: add temperature sensor
  2019-08-21 22:24 [PATCH v4 0/6] Add support of New Amlogic temperature sensor for G12 SoCs Guillaume La Roque
  2019-08-21 22:24 ` [PATCH v4 1/6] dt-bindings: thermal: Add DT bindings documentation for Amlogic Thermal Guillaume La Roque
  2019-08-21 22:24 ` [PATCH v4 2/6] thermal: amlogic: Add thermal driver to support G12 SoCs Guillaume La Roque
@ 2019-08-21 22:24 ` Guillaume La Roque
  2019-08-21 22:24 ` [PATCH v4 4/6] arm64: dts: meson: sei510: Add minimal thermal zone Guillaume La Roque
                   ` (3 subsequent siblings)
  6 siblings, 0 replies; 16+ messages in thread
From: Guillaume La Roque @ 2019-08-21 22:24 UTC (permalink / raw)
  To: rui.zhang, edubezval, daniel.lezcano
  Cc: devicetree, linux-amlogic, linux-kernel, linux-arm-kernel, linux-pm

Add cpu and ddr temperature sensors for G12 Socs

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 .../boot/dts/amlogic/meson-g12-common.dtsi    | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 06e186ca41e3..ce13c7c2e454 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -1353,6 +1353,26 @@
 				};
 			};
 
+			cpu_temp: temperature-sensor@34800 {
+				compatible = "amlogic,g12a-cpu-thermal",
+					     "amlogic,g12a-thermal";
+				reg = <0x0 0x34800 0x0 0x50>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_TS>;
+				#thermal-sensor-cells = <0>;
+				amlogic,ao-secure = <&sec_AO>;
+			};
+
+			ddr_temp: temperature-sensor@34c00 {
+				compatible = "amlogic,g12a-ddr-thermal",
+					     "amlogic,g12a-thermal";
+				reg = <0x0 0x34c00 0x0 0x50>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_TS>;
+				#thermal-sensor-cells = <0>;
+				amlogic,ao-secure = <&sec_AO>;
+			};
+
 			usb2_phy0: phy@36000 {
 				compatible = "amlogic,g12a-usb2-phy";
 				reg = <0x0 0x36000 0x0 0x2000>;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v4 4/6] arm64: dts: meson: sei510: Add minimal thermal zone
  2019-08-21 22:24 [PATCH v4 0/6] Add support of New Amlogic temperature sensor for G12 SoCs Guillaume La Roque
                   ` (2 preceding siblings ...)
  2019-08-21 22:24 ` [PATCH v4 3/6] arm64: dts: amlogic: g12: add temperature sensor Guillaume La Roque
@ 2019-08-21 22:24 ` Guillaume La Roque
  2019-08-21 23:29   ` Kevin Hilman
  2019-08-21 22:24 ` [PATCH v4 5/6] arm64: dts: amlogic: odroid-n2: add " Guillaume La Roque
                   ` (2 subsequent siblings)
  6 siblings, 1 reply; 16+ messages in thread
From: Guillaume La Roque @ 2019-08-21 22:24 UTC (permalink / raw)
  To: rui.zhang, edubezval, daniel.lezcano
  Cc: devicetree, linux-amlogic, linux-kernel, linux-arm-kernel, linux-pm

Add minimal thermal zone for two temperature sensor
One is located close to the DDR and the other one is
located close to the PLLs (between the CPU and GPU)

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 .../boot/dts/amlogic/meson-g12a-sei510.dts    | 70 +++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index c9fa23a56562..35d2ebbd6d4e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -10,6 +10,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "seirobotics,sei510", "amlogic,g12a";
@@ -33,6 +34,67 @@
 		ethernet0 = &ethmac;
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&cpu_temp>;
+
+			trips {
+				cpu_hot: cpu-hot {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_critical>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&ddr_temp>;
+
+			trips {
+				ddr_critical: ddr-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map {
+					trip = <&ddr_critical>;
+					cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	mono_dac: audio-codec-0 {
 		compatible = "maxim,max98357a";
 		#sound-dai-cells = <0>;
@@ -321,6 +383,7 @@
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
 	clock-latency = <50000>;
+	#cooling-cells = <2>;
 };
 
 &cpu1 {
@@ -328,6 +391,7 @@
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
 	clock-latency = <50000>;
+	#cooling-cells = <2>;
 };
 
 &cpu2 {
@@ -335,6 +399,7 @@
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
 	clock-latency = <50000>;
+	#cooling-cells = <2>;
 };
 
 &cpu3 {
@@ -342,6 +407,7 @@
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
 	clock-latency = <50000>;
+	#cooling-cells = <2>;
 };
 
 &cvbs_vdac_port {
@@ -368,6 +434,10 @@
 	status = "okay";
 };
 
+&mali {
+	#cooling-cells = <2>;
+};
+
 &hdmi_tx {
 	status = "okay";
 	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v4 5/6] arm64: dts: amlogic: odroid-n2: add minimal thermal zone
  2019-08-21 22:24 [PATCH v4 0/6] Add support of New Amlogic temperature sensor for G12 SoCs Guillaume La Roque
                   ` (3 preceding siblings ...)
  2019-08-21 22:24 ` [PATCH v4 4/6] arm64: dts: meson: sei510: Add minimal thermal zone Guillaume La Roque
@ 2019-08-21 22:24 ` " Guillaume La Roque
  2019-08-21 22:24 ` [PATCH v4 6/6] MAINTAINERS: add entry for Amlogic Thermal driver Guillaume La Roque
  2019-08-21 23:39 ` [PATCH v4 0/6] Add support of New Amlogic temperature sensor for G12 SoCs Kevin Hilman
  6 siblings, 0 replies; 16+ messages in thread
From: Guillaume La Roque @ 2019-08-21 22:24 UTC (permalink / raw)
  To: rui.zhang, edubezval, daniel.lezcano
  Cc: devicetree, linux-amlogic, linux-kernel, linux-arm-kernel, linux-pm

Add minimal thermal zone for two temperature sensor
One is located close to the DDR and the other one is
located close to the PLLs (between the CPU and GPU)

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 .../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 76 +++++++++++++++++++
 1 file changed, 76 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index 777bfb938854..8d7c73bad4aa 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -10,6 +10,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "hardkernel,odroid-n2", "amlogic,g12b";
@@ -20,6 +21,71 @@
 		ethernet0 = &ethmac;
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&cpu_temp>;
+
+			trips {
+				cpu_hot: cpu-hot {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_critical>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&ddr_temp>;
+
+			trips {
+				ddr_critical: ddr-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map {
+					trip = <&ddr_critical>;
+					cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -289,6 +355,7 @@
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
 	clock-latency = <50000>;
+	#cooling-cells = <2>;
 };
 
 &cpu1 {
@@ -296,6 +363,7 @@
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
 	clock-latency = <50000>;
+	#cooling-cells = <2>;
 };
 
 &cpu100 {
@@ -303,6 +371,7 @@
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
 	clock-latency = <50000>;
+	#cooling-cells = <2>;
 };
 
 &cpu101 {
@@ -310,6 +379,7 @@
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
 	clock-latency = <50000>;
+	#cooling-cells = <2>;
 };
 
 &cpu102 {
@@ -317,6 +387,7 @@
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
 	clock-latency = <50000>;
+	#cooling-cells = <2>;
 };
 
 &cpu103 {
@@ -324,6 +395,7 @@
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
 	clock-latency = <50000>;
+	#cooling-cells = <2>;
 };
 
 &ext_mdio {
@@ -378,6 +450,10 @@
 	};
 };
 
+&mali {
+	#cooling-cells = <2>;
+};
+
 &hdmi_tx {
 	status = "okay";
 	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v4 6/6] MAINTAINERS: add entry for Amlogic Thermal driver
  2019-08-21 22:24 [PATCH v4 0/6] Add support of New Amlogic temperature sensor for G12 SoCs Guillaume La Roque
                   ` (4 preceding siblings ...)
  2019-08-21 22:24 ` [PATCH v4 5/6] arm64: dts: amlogic: odroid-n2: add " Guillaume La Roque
@ 2019-08-21 22:24 ` Guillaume La Roque
  2019-08-21 23:39 ` [PATCH v4 0/6] Add support of New Amlogic temperature sensor for G12 SoCs Kevin Hilman
  6 siblings, 0 replies; 16+ messages in thread
From: Guillaume La Roque @ 2019-08-21 22:24 UTC (permalink / raw)
  To: rui.zhang, edubezval, daniel.lezcano
  Cc: devicetree, linux-amlogic, linux-kernel, linux-arm-kernel, linux-pm

Add myself as maintainer for Amlogic Thermal driver.

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
---
 MAINTAINERS | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index fb2b12f75c37..299f27d11058 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15910,6 +15910,15 @@ F:	Documentation/driver-api/thermal/cpu-cooling-api.rst
 F:	drivers/thermal/cpu_cooling.c
 F:	include/linux/cpu_cooling.h
 
+THERMAL DRIVER FOR AMLOGIC SOCS
+M:	Guillaume La Roque <glaroque@baylibre.com>
+L:	linux-pm@vger.kernel.org
+L:	linux-amlogic@lists.infradead.org
+W:	http://linux-meson.com/
+S:	Supported
+F:	drivers/thermal/amlogic_thermal.c
+F:	Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
+
 THINKPAD ACPI EXTRAS DRIVER
 M:	Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
 L:	ibm-acpi-devel@lists.sourceforge.net
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v4 4/6] arm64: dts: meson: sei510: Add minimal thermal zone
  2019-08-21 22:24 ` [PATCH v4 4/6] arm64: dts: meson: sei510: Add minimal thermal zone Guillaume La Roque
@ 2019-08-21 23:29   ` Kevin Hilman
  2019-08-22  9:15     ` Neil Armstrong
  2019-09-13  7:47     ` Amit Kucheria
  0 siblings, 2 replies; 16+ messages in thread
From: Kevin Hilman @ 2019-08-21 23:29 UTC (permalink / raw)
  To: Guillaume La Roque, rui.zhang, edubezval, daniel.lezcano
  Cc: devicetree, linux-amlogic, linux-kernel, linux-arm-kernel, linux-pm

Guillaume La Roque <glaroque@baylibre.com> writes:

> Add minimal thermal zone for two temperature sensor
> One is located close to the DDR and the other one is
> located close to the PLLs (between the CPU and GPU)
>
> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>  .../boot/dts/amlogic/meson-g12a-sei510.dts    | 70 +++++++++++++++++++
>  1 file changed, 70 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
> index c9fa23a56562..35d2ebbd6d4e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
> @@ -10,6 +10,7 @@
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/gpio/meson-g12a-gpio.h>
>  #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
> +#include <dt-bindings/thermal/thermal.h>
>  
>  / {
>  	compatible = "seirobotics,sei510", "amlogic,g12a";
> @@ -33,6 +34,67 @@
>  		ethernet0 = &ethmac;
>  	};
>  
> +	thermal-zones {
> +		cpu-thermal {
> +			polling-delay = <1000>;
> +			polling-delay-passive = <100>;
> +			thermal-sensors = <&cpu_temp>;
> +
> +			trips {
> +				cpu_hot: cpu-hot {
> +					temperature = <85000>; /* millicelsius */
> +					hysteresis = <2000>; /* millicelsius */
> +					type = "hot";
> +				};
> +
> +				cpu_critical: cpu-critical {
> +					temperature = <110000>; /* millicelsius */
> +					hysteresis = <2000>; /* millicelsius */
> +					type = "critical";
> +				};
> +			};
> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu_hot>;
> +					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +
> +				map1 {
> +					trip = <&cpu_critical>;
> +					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
> +		};
> +
> +		ddr-thermal {
> +			polling-delay = <1000>;
> +			polling-delay-passive = <100>;
> +			thermal-sensors = <&ddr_temp>;
> +
> +			trips {
> +				ddr_critical: ddr-critical {
> +					temperature = <110000>; /* millicelsius */
> +					hysteresis = <2000>; /* millicelsius */
> +					type = "critical";
> +				};
> +			};
> +
> +			cooling-maps {
> +				map {
> +					trip = <&ddr_critical>;
> +					cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
> +		};
> +	};
> +
>  	mono_dac: audio-codec-0 {
>  		compatible = "maxim,max98357a";
>  		#sound-dai-cells = <0>;
> @@ -321,6 +383,7 @@
>  	operating-points-v2 = <&cpu_opp_table>;
>  	clocks = <&clkc CLKID_CPU_CLK>;
>  	clock-latency = <50000>;
> +	#cooling-cells = <2>;
>  };
>  
>  &cpu1 {
> @@ -328,6 +391,7 @@
>  	operating-points-v2 = <&cpu_opp_table>;
>  	clocks = <&clkc CLKID_CPU_CLK>;
>  	clock-latency = <50000>;
> +	#cooling-cells = <2>;
>  };
>  
>  &cpu2 {
> @@ -335,6 +399,7 @@
>  	operating-points-v2 = <&cpu_opp_table>;
>  	clocks = <&clkc CLKID_CPU_CLK>;
>  	clock-latency = <50000>;
> +	#cooling-cells = <2>;
>  };
>  
>  &cpu3 {
> @@ -342,6 +407,7 @@
>  	operating-points-v2 = <&cpu_opp_table>;
>  	clocks = <&clkc CLKID_CPU_CLK>;
>  	clock-latency = <50000>;
> +	#cooling-cells = <2>;
>  };
>  
>  &cvbs_vdac_port {
> @@ -368,6 +434,10 @@
>  	status = "okay";
>  };
>  
> +&mali {
> +	#cooling-cells = <2>;
> +};
> +

Is there a reason these #cooling-cells properties belong in the SoC
.dtsi and not the board .dts.  Seems like you'll have to repeat this in
every board .dts which doesn't seem necessary.

Same comment for patch 5/6

Kevin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v4 0/6] Add support of New Amlogic temperature sensor for G12 SoCs
  2019-08-21 22:24 [PATCH v4 0/6] Add support of New Amlogic temperature sensor for G12 SoCs Guillaume La Roque
                   ` (5 preceding siblings ...)
  2019-08-21 22:24 ` [PATCH v4 6/6] MAINTAINERS: add entry for Amlogic Thermal driver Guillaume La Roque
@ 2019-08-21 23:39 ` Kevin Hilman
  6 siblings, 0 replies; 16+ messages in thread
From: Kevin Hilman @ 2019-08-21 23:39 UTC (permalink / raw)
  To: Guillaume La Roque, rui.zhang, edubezval, daniel.lezcano
  Cc: devicetree, linux-amlogic, linux-kernel, linux-arm-kernel, linux-pm

Guillaume La Roque <glaroque@baylibre.com> writes:

> This patchs series add support of New Amlogic temperature sensor and minimal
> thermal zone for SEI510 and ODROID-N2 boards.
>
> First implementation was doing on IIO[1] but after comments i move on thermal framework.
> Formulas and calibration values come from amlogic.
>
> Changes since v3:
>   - Add cooling map and trip point for hot type
>   - move compatible on g12a instead of g12 to be aligned with others
>   - add all reviewer, sorry for this mistake
>
> Changes since v2:
>   - fix yaml documention
>   - remove unneeded status variable for temperature-sensor node
>   - rework driver after Martin review
>   - add some information in commit message
>
> Changes since v1:
>   - fix enum vs const in documentation
>   - fix error with thermal-sensor-cells value set to 1 instead of 0
>   - add some dependencies needed to add cooling-maps
>
> Dependencies :
> - patch 3,4 & 5: depends on Neil's patch and series :
>               - missing dwc2 phy-names[2]
>               - patchsets to add DVFS on G12a[3] which have deps on [4] and [5]
>
> [1] https://lore.kernel.org/linux-amlogic/20190604144714.2009-1-glaroque@baylibre.com/
> [2] https://lore.kernel.org/linux-amlogic/20190625123647.26117-1-narmstrong@baylibre.com/
> [3] https://lore.kernel.org/linux-amlogic/20190729132622.7566-1-narmstrong@baylibre.com/
> [4] https://lore.kernel.org/linux-amlogic/20190731084019.8451-5-narmstrong@baylibre.com/
> [5] https://lore.kernel.org/linux-amlogic/20190729132622.7566-3-narmstrong@baylibre.com/
>
>
> Tested-by: Christian Hewitt <christianshewitt@gmail.com>
> Tested-by: Kevin Hilman <khilman@baylibre.com>

nit: you should put these on the individual patches, since the cover
letter does not get applied to any tree, any tags here get lost.

Kevin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v4 1/6] dt-bindings: thermal: Add DT bindings documentation for Amlogic Thermal
  2019-08-21 22:24 ` [PATCH v4 1/6] dt-bindings: thermal: Add DT bindings documentation for Amlogic Thermal Guillaume La Roque
@ 2019-08-21 23:40   ` Kevin Hilman
  2019-09-13 10:41   ` Amit Kucheria
  1 sibling, 0 replies; 16+ messages in thread
From: Kevin Hilman @ 2019-08-21 23:40 UTC (permalink / raw)
  To: Guillaume La Roque, rui.zhang, edubezval, daniel.lezcano
  Cc: devicetree, linux-amlogic, linux-kernel, linux-arm-kernel, linux-pm

Guillaume La Roque <glaroque@baylibre.com> writes:

> Adding the devicetree binding documentation for the Amlogic temperature
> sensor found in the Amlogic Meson G12 SoCs.
> the G12A  and G12B SoCs are supported.
>
> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
> Reviewed-by: Rob Herring <robh@kernel.org>

nit: put your sign-off at the end.  The tags you collect from
reviewers/testers should go first.

Kevin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v4 4/6] arm64: dts: meson: sei510: Add minimal thermal zone
  2019-08-21 23:29   ` Kevin Hilman
@ 2019-08-22  9:15     ` Neil Armstrong
  2019-08-22 19:59       ` Kevin Hilman
  2019-09-13  7:47     ` Amit Kucheria
  1 sibling, 1 reply; 16+ messages in thread
From: Neil Armstrong @ 2019-08-22  9:15 UTC (permalink / raw)
  To: Kevin Hilman, Guillaume La Roque, rui.zhang, edubezval, daniel.lezcano
  Cc: devicetree, linux-pm, linux-kernel, linux-arm-kernel, linux-amlogic

On 22/08/2019 01:29, Kevin Hilman wrote:
> Guillaume La Roque <glaroque@baylibre.com> writes:
> 
>> Add minimal thermal zone for two temperature sensor
>> One is located close to the DDR and the other one is
>> located close to the PLLs (between the CPU and GPU)
>>
>> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
>> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>> ---
>>  .../boot/dts/amlogic/meson-g12a-sei510.dts    | 70 +++++++++++++++++++
>>  1 file changed, 70 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
>> index c9fa23a56562..35d2ebbd6d4e 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
>> @@ -10,6 +10,7 @@
>>  #include <dt-bindings/input/input.h>
>>  #include <dt-bindings/gpio/meson-g12a-gpio.h>
>>  #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
>> +#include <dt-bindings/thermal/thermal.h>
>>  
>>  / {
>>  	compatible = "seirobotics,sei510", "amlogic,g12a";
>> @@ -33,6 +34,67 @@
>>  		ethernet0 = &ethmac;
>>  	};
>>  
>> +	thermal-zones {
>> +		cpu-thermal {
>> +			polling-delay = <1000>;
>> +			polling-delay-passive = <100>;
>> +			thermal-sensors = <&cpu_temp>;
>> +
>> +			trips {
>> +				cpu_hot: cpu-hot {
>> +					temperature = <85000>; /* millicelsius */
>> +					hysteresis = <2000>; /* millicelsius */
>> +					type = "hot";
>> +				};
>> +
>> +				cpu_critical: cpu-critical {
>> +					temperature = <110000>; /* millicelsius */
>> +					hysteresis = <2000>; /* millicelsius */
>> +					type = "critical";
>> +				};
>> +			};
>> +
>> +			cooling-maps {
>> +				map0 {
>> +					trip = <&cpu_hot>;
>> +					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +
>> +				map1 {
>> +					trip = <&cpu_critical>;
>> +					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> +							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +			};
>> +		};
>> +
>> +		ddr-thermal {
>> +			polling-delay = <1000>;
>> +			polling-delay-passive = <100>;
>> +			thermal-sensors = <&ddr_temp>;
>> +
>> +			trips {
>> +				ddr_critical: ddr-critical {
>> +					temperature = <110000>; /* millicelsius */
>> +					hysteresis = <2000>; /* millicelsius */
>> +					type = "critical";
>> +				};
>> +			};
>> +
>> +			cooling-maps {
>> +				map {
>> +					trip = <&ddr_critical>;
>> +					cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +			};
>> +		};
>> +	};
>> +
>>  	mono_dac: audio-codec-0 {
>>  		compatible = "maxim,max98357a";
>>  		#sound-dai-cells = <0>;
>> @@ -321,6 +383,7 @@
>>  	operating-points-v2 = <&cpu_opp_table>;
>>  	clocks = <&clkc CLKID_CPU_CLK>;
>>  	clock-latency = <50000>;
>> +	#cooling-cells = <2>;
>>  };
>>  
>>  &cpu1 {
>> @@ -328,6 +391,7 @@
>>  	operating-points-v2 = <&cpu_opp_table>;
>>  	clocks = <&clkc CLKID_CPU_CLK>;
>>  	clock-latency = <50000>;
>> +	#cooling-cells = <2>;
>>  };
>>  
>>  &cpu2 {
>> @@ -335,6 +399,7 @@
>>  	operating-points-v2 = <&cpu_opp_table>;
>>  	clocks = <&clkc CLKID_CPU_CLK>;
>>  	clock-latency = <50000>;
>> +	#cooling-cells = <2>;
>>  };
>>  
>>  &cpu3 {
>> @@ -342,6 +407,7 @@
>>  	operating-points-v2 = <&cpu_opp_table>;
>>  	clocks = <&clkc CLKID_CPU_CLK>;
>>  	clock-latency = <50000>;
>> +	#cooling-cells = <2>;
>>  };
>>  
>>  &cvbs_vdac_port {
>> @@ -368,6 +434,10 @@
>>  	status = "okay";
>>  };
>>  
>> +&mali {
>> +	#cooling-cells = <2>;
>> +};
>> +
> 
> Is there a reason these #cooling-cells properties belong in the SoC
> .dtsi and not the board .dts.  Seems like you'll have to repeat this in
> every board .dts which doesn't seem necessary.

I asked him to keep the cooling-cells in the boards until we add the thermal
in all the remaining boards.

Seemed to be safer way at the time...

Neil

> 
> Same comment for patch 5/6
> 
> Kevin
> 
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v4 4/6] arm64: dts: meson: sei510: Add minimal thermal zone
  2019-08-22  9:15     ` Neil Armstrong
@ 2019-08-22 19:59       ` Kevin Hilman
  0 siblings, 0 replies; 16+ messages in thread
From: Kevin Hilman @ 2019-08-22 19:59 UTC (permalink / raw)
  To: Neil Armstrong, Guillaume La Roque, rui.zhang, edubezval, daniel.lezcano
  Cc: devicetree, linux-pm, linux-kernel, linux-arm-kernel, linux-amlogic

Neil Armstrong <narmstrong@baylibre.com> writes:

> On 22/08/2019 01:29, Kevin Hilman wrote:
>> Guillaume La Roque <glaroque@baylibre.com> writes:
>> 
>>> Add minimal thermal zone for two temperature sensor
>>> One is located close to the DDR and the other one is
>>> located close to the PLLs (between the CPU and GPU)
>>>
>>> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
>>> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>>> ---
>>>  .../boot/dts/amlogic/meson-g12a-sei510.dts    | 70 +++++++++++++++++++
>>>  1 file changed, 70 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
>>> index c9fa23a56562..35d2ebbd6d4e 100644
>>> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
>>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
>>> @@ -10,6 +10,7 @@
>>>  #include <dt-bindings/input/input.h>
>>>  #include <dt-bindings/gpio/meson-g12a-gpio.h>
>>>  #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
>>> +#include <dt-bindings/thermal/thermal.h>
>>>  
>>>  / {
>>>  	compatible = "seirobotics,sei510", "amlogic,g12a";
>>> @@ -33,6 +34,67 @@
>>>  		ethernet0 = &ethmac;
>>>  	};
>>>  
>>> +	thermal-zones {
>>> +		cpu-thermal {
>>> +			polling-delay = <1000>;
>>> +			polling-delay-passive = <100>;
>>> +			thermal-sensors = <&cpu_temp>;
>>> +
>>> +			trips {
>>> +				cpu_hot: cpu-hot {
>>> +					temperature = <85000>; /* millicelsius */
>>> +					hysteresis = <2000>; /* millicelsius */
>>> +					type = "hot";
>>> +				};
>>> +
>>> +				cpu_critical: cpu-critical {
>>> +					temperature = <110000>; /* millicelsius */
>>> +					hysteresis = <2000>; /* millicelsius */
>>> +					type = "critical";
>>> +				};
>>> +			};
>>> +
>>> +			cooling-maps {
>>> +				map0 {
>>> +					trip = <&cpu_hot>;
>>> +					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>> +							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>> +							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>> +							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>> +				};
>>> +
>>> +				map1 {
>>> +					trip = <&cpu_critical>;
>>> +					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>> +							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>> +							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>> +							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>> +				};
>>> +			};
>>> +		};
>>> +
>>> +		ddr-thermal {
>>> +			polling-delay = <1000>;
>>> +			polling-delay-passive = <100>;
>>> +			thermal-sensors = <&ddr_temp>;
>>> +
>>> +			trips {
>>> +				ddr_critical: ddr-critical {
>>> +					temperature = <110000>; /* millicelsius */
>>> +					hysteresis = <2000>; /* millicelsius */
>>> +					type = "critical";
>>> +				};
>>> +			};
>>> +
>>> +			cooling-maps {
>>> +				map {
>>> +					trip = <&ddr_critical>;
>>> +					cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>> +				};
>>> +			};
>>> +		};
>>> +	};
>>> +
>>>  	mono_dac: audio-codec-0 {
>>>  		compatible = "maxim,max98357a";
>>>  		#sound-dai-cells = <0>;
>>> @@ -321,6 +383,7 @@
>>>  	operating-points-v2 = <&cpu_opp_table>;
>>>  	clocks = <&clkc CLKID_CPU_CLK>;
>>>  	clock-latency = <50000>;
>>> +	#cooling-cells = <2>;
>>>  };
>>>  
>>>  &cpu1 {
>>> @@ -328,6 +391,7 @@
>>>  	operating-points-v2 = <&cpu_opp_table>;
>>>  	clocks = <&clkc CLKID_CPU_CLK>;
>>>  	clock-latency = <50000>;
>>> +	#cooling-cells = <2>;
>>>  };
>>>  
>>>  &cpu2 {
>>> @@ -335,6 +399,7 @@
>>>  	operating-points-v2 = <&cpu_opp_table>;
>>>  	clocks = <&clkc CLKID_CPU_CLK>;
>>>  	clock-latency = <50000>;
>>> +	#cooling-cells = <2>;
>>>  };
>>>  
>>>  &cpu3 {
>>> @@ -342,6 +407,7 @@
>>>  	operating-points-v2 = <&cpu_opp_table>;
>>>  	clocks = <&clkc CLKID_CPU_CLK>;
>>>  	clock-latency = <50000>;
>>> +	#cooling-cells = <2>;
>>>  };
>>>  
>>>  &cvbs_vdac_port {
>>> @@ -368,6 +434,10 @@
>>>  	status = "okay";
>>>  };
>>>  
>>> +&mali {
>>> +	#cooling-cells = <2>;
>>> +};
>>> +
>> 
>> Is there a reason these #cooling-cells properties belong in the SoC
>> .dtsi and not the board .dts.  Seems like you'll have to repeat this in
>> every board .dts which doesn't seem necessary.
>
> I asked him to keep the cooling-cells in the boards until we add the thermal
> in all the remaining boards.
>
> Seemed to be safer way at the time...

I assumed that #cooling-cells alone would be harmless.

If there are no thermal-zones with trips/maps defined, what can
#cooling-cells by itself do?

Kevin


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v4 2/6] thermal: amlogic: Add thermal driver to support G12 SoCs
  2019-08-21 22:24 ` [PATCH v4 2/6] thermal: amlogic: Add thermal driver to support G12 SoCs Guillaume La Roque
@ 2019-08-29 18:11   ` Kevin Hilman
  2019-09-13  9:21   ` Amit Kucheria
  1 sibling, 0 replies; 16+ messages in thread
From: Kevin Hilman @ 2019-08-29 18:11 UTC (permalink / raw)
  To: rui.zhang, edubezval, daniel.lezcano
  Cc: , devicetree, linux-pm, linux-kernel, Guillaume La Roque,
	linux-amlogic, linux-arm-kernel

Hello thermal maintainers,

Guillaume La Roque <glaroque@baylibre.com> writes:

> Amlogic G12A and G12B SoCs integrate two thermal sensors
> with the same design.
> One is located close to the DDR controller and the other one is
> located close to the PLLs (between the CPU and GPU).
>
> The calibration data for each of the thermal sensors instance is
> stored in a different location within the AO region.
>
> Implement reading the temperature from each thermal sensor.
>
> The IP block has more functionality, which may be added to this driver
> in the future:
> - chip reset when the temperature exceeds a configurable threshold
> - up to four interrupts when the temperature has risen above a
> configurable threshold
> - up to four interrupts when the temperature has fallen below a
> configurable threshold
>
> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>

Could we get a review/merge of this driver ( and hopefully queued up for
v5.4 ?)

This has been reviewed and tested by users on this platform and it's
working well.

Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>

Thanks,

Kevin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v4 4/6] arm64: dts: meson: sei510: Add minimal thermal zone
  2019-08-21 23:29   ` Kevin Hilman
  2019-08-22  9:15     ` Neil Armstrong
@ 2019-09-13  7:47     ` Amit Kucheria
  1 sibling, 0 replies; 16+ messages in thread
From: Amit Kucheria @ 2019-09-13  7:47 UTC (permalink / raw)
  To: Kevin Hilman
  Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Linux PM list, Daniel Lezcano, LKML, Eduardo Valentin,
	Guillaume La Roque, linux-amlogic, Zhang Rui, lakml

On Thu, Aug 22, 2019 at 4:59 AM Kevin Hilman <khilman@baylibre.com> wrote:
>
> Guillaume La Roque <glaroque@baylibre.com> writes:
>
> > Add minimal thermal zone for two temperature sensor
> > One is located close to the DDR and the other one is
> > located close to the PLLs (between the CPU and GPU)
> >
> > Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
> > Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> > ---
> >  .../boot/dts/amlogic/meson-g12a-sei510.dts    | 70 +++++++++++++++++++
> >  1 file changed, 70 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
> > index c9fa23a56562..35d2ebbd6d4e 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
> > +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
> > @@ -10,6 +10,7 @@
> >  #include <dt-bindings/input/input.h>
> >  #include <dt-bindings/gpio/meson-g12a-gpio.h>
> >  #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
> > +#include <dt-bindings/thermal/thermal.h>
> >
> >  / {
> >       compatible = "seirobotics,sei510", "amlogic,g12a";
> > @@ -33,6 +34,67 @@
> >               ethernet0 = &ethmac;
> >       };
> >
> > +     thermal-zones {
> > +             cpu-thermal {
> > +                     polling-delay = <1000>;
> > +                     polling-delay-passive = <100>;
> > +                     thermal-sensors = <&cpu_temp>;
> > +
> > +                     trips {
> > +                             cpu_hot: cpu-hot {
> > +                                     temperature = <85000>; /* millicelsius */
> > +                                     hysteresis = <2000>; /* millicelsius */
> > +                                     type = "hot";
> > +                             };

No passive trip point? That is where the cooling-maps are really useful.

> > +
> > +                             cpu_critical: cpu-critical {
> > +                                     temperature = <110000>; /* millicelsius */
> > +                                     hysteresis = <2000>; /* millicelsius */
> > +                                     type = "critical";
> > +                             };
> > +                     };
> > +

I think, what you really want is to change your hot trip point above
to passive. And if you need another trip before that (to send
notification to userspace, for example), just add another hot trip
point at a lower temperature.

> > +                     cooling-maps {
> > +                             map0 {
> > +                                     trip = <&cpu_hot>;
> > +                                     cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +                                                      <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +                                                      <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +                                                      <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > +                             };
> > +
> > +                             map1 {
> > +                                     trip = <&cpu_critical>;
> > +                                     cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +                                                      <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +                                                      <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +                                                      <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > +                             };

The cooling-map associated with a critical trip point is of no use in
my experience because the device is already on its way to shutting
down then.

> > +                     };
> > +             };
> > +
> > +             ddr-thermal {
> > +                     polling-delay = <1000>;
> > +                     polling-delay-passive = <100>;
> > +                     thermal-sensors = <&ddr_temp>;
> > +
> > +                     trips {
> > +                             ddr_critical: ddr-critical {
> > +                                     temperature = <110000>; /* millicelsius */
> > +                                     hysteresis = <2000>; /* millicelsius */
> > +                                     type = "critical";
> > +                             };
> > +                     };
> > +
> > +                     cooling-maps {
> > +                             map {
> > +                                     trip = <&ddr_critical>;
> > +                                     cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;

Same here. The cooling-map makes more sense against a passive trip type.

> > +                             };
> > +                     };
> > +             };
> > +     };
> > +
> >       mono_dac: audio-codec-0 {
> >               compatible = "maxim,max98357a";
> >               #sound-dai-cells = <0>;
> > @@ -321,6 +383,7 @@
> >       operating-points-v2 = <&cpu_opp_table>;
> >       clocks = <&clkc CLKID_CPU_CLK>;
> >       clock-latency = <50000>;
> > +     #cooling-cells = <2>;
> >  };
> >
> >  &cpu1 {
> > @@ -328,6 +391,7 @@
> >       operating-points-v2 = <&cpu_opp_table>;
> >       clocks = <&clkc CLKID_CPU_CLK>;
> >       clock-latency = <50000>;
> > +     #cooling-cells = <2>;
> >  };
> >
> >  &cpu2 {
> > @@ -335,6 +399,7 @@
> >       operating-points-v2 = <&cpu_opp_table>;
> >       clocks = <&clkc CLKID_CPU_CLK>;
> >       clock-latency = <50000>;
> > +     #cooling-cells = <2>;
> >  };
> >
> >  &cpu3 {
> > @@ -342,6 +407,7 @@
> >       operating-points-v2 = <&cpu_opp_table>;
> >       clocks = <&clkc CLKID_CPU_CLK>;
> >       clock-latency = <50000>;
> > +     #cooling-cells = <2>;
> >  };
> >
> >  &cvbs_vdac_port {
> > @@ -368,6 +434,10 @@
> >       status = "okay";
> >  };
> >
> > +&mali {
> > +     #cooling-cells = <2>;
> > +};
> > +
>
> Is there a reason these #cooling-cells properties belong in the SoC
> .dtsi and not the board .dts.  Seems like you'll have to repeat this in
> every board .dts which doesn't seem necessary.
>
> Same comment for patch 5/6

Agreed. Even the thermal zones belong in the SoC .dtsi. You can always
override the trip-points in a board .dts if required if you have a
board designed in a different form-factor or with active cooling.

/Amit

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v4 2/6] thermal: amlogic: Add thermal driver to support G12 SoCs
  2019-08-21 22:24 ` [PATCH v4 2/6] thermal: amlogic: Add thermal driver to support G12 SoCs Guillaume La Roque
  2019-08-29 18:11   ` Kevin Hilman
@ 2019-09-13  9:21   ` Amit Kucheria
  1 sibling, 0 replies; 16+ messages in thread
From: Amit Kucheria @ 2019-09-13  9:21 UTC (permalink / raw)
  To: Guillaume La Roque
  Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Linux PM list, Daniel Lezcano, LKML, Eduardo Valentin,
	linux-amlogic, Zhang Rui, lakml

On Thu, Aug 22, 2019 at 3:54 AM Guillaume La Roque
<glaroque@baylibre.com> wrote:
>
> Amlogic G12A and G12B SoCs integrate two thermal sensors
> with the same design.
> One is located close to the DDR controller and the other one is
> located close to the PLLs (between the CPU and GPU).

Merge into one paragraph?

> The calibration data for each of the thermal sensors instance is
> stored in a different location within the AO region.
>
> Implement reading the temperature from each thermal sensor.
>
> The IP block has more functionality, which may be added to this driver
> in the future:
> - chip reset when the temperature exceeds a configurable threshold
> - up to four interrupts when the temperature has risen above a
> configurable threshold
> - up to four interrupts when the temperature has fallen below a
> configurable threshold
>
> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
> ---
>  drivers/thermal/Kconfig           |  11 +
>  drivers/thermal/Makefile          |   1 +
>  drivers/thermal/amlogic_thermal.c | 335 ++++++++++++++++++++++++++++++
>  3 files changed, 347 insertions(+)
>  create mode 100644 drivers/thermal/amlogic_thermal.c
>
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 9966364a6deb..0f31bb4bc372 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -348,6 +348,17 @@ config MTK_THERMAL
>           Enable this option if you want to have support for thermal management
>           controller present in Mediatek SoCs
>
> +config AMLOGIC_THERMAL
> +       tristate "Amlogic Thermal Support"
> +       default ARCH_MESON
> +       depends on OF && ARCH_MESON
> +       help
> +         If you say yes here you get support for Amlogic Thermal
> +         for G12 SoC Family.
> +
> +         This driver can also be built as a module. If so, the module will
> +         be called amlogic_thermal.
> +
>  menu "Intel thermal drivers"
>  depends on X86 || X86_INTEL_QUARK || COMPILE_TEST
>  source "drivers/thermal/intel/Kconfig"
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 74a37c7f847a..baeb70bf0568 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -54,3 +54,4 @@ obj-$(CONFIG_MTK_THERMAL)     += mtk_thermal.o
>  obj-$(CONFIG_GENERIC_ADC_THERMAL)      += thermal-generic-adc.o
>  obj-$(CONFIG_ZX2967_THERMAL)   += zx2967_thermal.o
>  obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o
> +obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
> diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c
> new file mode 100644
> index 000000000000..173d808048d2
> --- /dev/null
> +++ b/drivers/thermal/amlogic_thermal.c
> @@ -0,0 +1,335 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Amlogic Thermal Sensor Driver
> + *
> + * Copyright (C) 2017 Huan Biao <huan.biao@amlogic.com>
> + * Copyright (C) 2019 Guillaume La Roque <glaroque@baylibre.com>
> + *
> + * Register value to celsius temperature formulas:
> + *     Read_Val            m * U
> + * U = ---------, Uptat = ---------
> + *     2^16              1 + n * U
> + *
> + * Temperature = A * ( Uptat + u_efuse / 2^16 )- B
> + *
> + *  A B m n : calibration parameters
> + *  u_efuse : fused calibration value, it's a signed 16 bits value
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/thermal.h>
> +
> +#include "thermal_core.h"
> +
> +#define TSENSOR_CFG_REG1                       0x4
> +       #define TSENSOR_CFG_REG1_RSET_VBG       BIT(12)
> +       #define TSENSOR_CFG_REG1_RSET_ADC       BIT(11)
> +       #define TSENSOR_CFG_REG1_VCM_EN         BIT(10)
> +       #define TSENSOR_CFG_REG1_VBG_EN         BIT(9)
> +       #define TSENSOR_CFG_REG1_OUT_CTL        BIT(6)
> +       #define TSENSOR_CFG_REG1_FILTER_EN      BIT(5)
> +       #define TSENSOR_CFG_REG1_DEM_EN         BIT(3)
> +       #define TSENSOR_CFG_REG1_CH_SEL         GENMASK(1, 0)
> +       #define TSENSOR_CFG_REG1_ENABLE         \
> +               (TSENSOR_CFG_REG1_FILTER_EN |   \
> +                TSENSOR_CFG_REG1_VCM_EN |      \
> +                TSENSOR_CFG_REG1_VBG_EN |      \
> +                TSENSOR_CFG_REG1_DEM_EN |      \
> +                TSENSOR_CFG_REG1_CH_SEL)
> +
> +#define TSENSOR_STAT0                  0x40
> +
> +#define TSENSOR_STAT9                  0x64
> +
> +#define TSENSOR_READ_TEMP_MASK         GENMASK(15, 0)
> +#define TSENSOR_TEMP_MASK              GENMASK(11, 0)
> +
> +#define TSENSOR_TRIM_SIGN_MASK         BIT(15)
> +#define TSENSOR_TRIM_TEMP_MASK         GENMASK(14, 0)
> +#define TSENSOR_TRIM_VERSION_MASK      GENMASK(31, 24)
> +
> +#define TSENSOR_TRIM_VERSION(_version) \
> +       FIELD_GET(TSENSOR_TRIM_VERSION_MASK, _version)
> +
> +#define TSENSOR_TRIM_CALIB_VALID_MASK  (GENMASK(3, 2) | BIT(7))
> +
> +#define TSENSOR_CALIB_OFFSET   1
> +#define TSENSOR_CALIB_SHIFT    4
> +
> +/**
> + * struct amlogic_thermal_soc_calib_data
> + * @A, B, m, n: calibration parameters
> + * This structure is required for configuration of amlogic thermal driver.
> + */
> +struct amlogic_thermal_soc_calib_data {
> +       int A;
> +       int B;
> +       int m;
> +       int n;
> +};
> +
> +/**
> + * struct amlogic_thermal_data
> + * @u_efuse_off: register offset to read fused calibration value
> + * @soc: calibration parameters structure pointer

This doesn't match the member below.

> + * @regmap_config: regmap config for the device
> + * This structure is required for configuration of amlogic thermal driver.
> + */
> +struct amlogic_thermal_data {
> +       int u_efuse_off;
> +       const struct amlogic_thermal_soc_calib_data *calibration_parameters;
> +       const struct regmap_config *regmap_config;
> +};
> +
> +struct amlogic_thermal {
> +       struct platform_device *pdev;
> +       const struct amlogic_thermal_data *data;
> +       struct regmap *regmap;
> +       struct regmap *sec_ao_map;
> +       struct clk *clk;
> +       struct thermal_zone_device *tzd;
> +       u32 trim_info;
> +};
> +
> +/*
> + * Calculate a temperature value from a temperature code.
> + * The unit of the temperature is degree milliCelsius.
> + */
> +static int amlogic_thermal_code_to_millicelsius(struct amlogic_thermal *pdata,
> +                                               int temp_code)
> +{
> +       const struct amlogic_thermal_soc_calib_data *param =
> +                                       pdata->data->calibration_parameters;
> +       int temp;
> +       s64 factor, Uptat, uefuse;
> +
> +       uefuse = pdata->trim_info & TSENSOR_TRIM_SIGN_MASK ?
> +                            ~(pdata->trim_info & TSENSOR_TRIM_TEMP_MASK) + 1 :
> +                            (pdata->trim_info & TSENSOR_TRIM_TEMP_MASK);
> +
> +       factor = param->n * temp_code;
> +       factor = div_s64(factor, 100);
> +
> +       Uptat = temp_code * param->m;
> +       Uptat = div_s64(Uptat, 100);
> +       Uptat = Uptat * BIT(16);
> +       Uptat = div_s64(Uptat, BIT(16) + factor);
> +
> +       temp = (Uptat + uefuse) * param->A;
> +       temp = div_s64(temp, BIT(16));
> +       temp = (temp - param->B) * 100;
> +
> +       return temp;
> +}
> +
> +static int amlogic_thermal_initialize(struct amlogic_thermal *pdata)
> +{
> +       int ret = 0;
> +       int ver;
> +
> +       regmap_read(pdata->sec_ao_map, pdata->data->u_efuse_off,
> +                   &pdata->trim_info);
> +
> +       ver = TSENSOR_TRIM_VERSION(pdata->trim_info);
> +
> +       if ((ver & TSENSOR_TRIM_CALIB_VALID_MASK) == 0) {
> +               ret = -EINVAL;
> +               dev_err(&pdata->pdev->dev,
> +                       "tsensor thermal calibration not supported: 0x%x!\n",
> +                       ver);
> +       }
> +
> +       return ret;
> +}
> +
> +static int amlogic_thermal_enable(struct amlogic_thermal *data)
> +{
> +       int ret;
> +
> +       ret = clk_prepare_enable(data->clk);
> +       if (ret)
> +               return ret;
> +
> +       regmap_update_bits(data->regmap, TSENSOR_CFG_REG1,
> +                          TSENSOR_CFG_REG1_ENABLE, TSENSOR_CFG_REG1_ENABLE);
> +
> +       return 0;
> +}
> +
> +static int amlogic_thermal_disable(struct amlogic_thermal *data)
> +{
> +       regmap_update_bits(data->regmap, TSENSOR_CFG_REG1,
> +                          TSENSOR_CFG_REG1_ENABLE, 0);
> +       clk_disable_unprepare(data->clk);
> +
> +       return 0;
> +}
> +
> +static int amlogic_thermal_get_temp(void *data, int *temp)
> +{
> +       unsigned int tval;
> +       struct amlogic_thermal *pdata = data;
> +
> +       if (!data)
> +               return -EINVAL;
> +
> +       regmap_read(pdata->regmap, TSENSOR_STAT0, &tval);
> +       *temp =
> +          amlogic_thermal_code_to_millicelsius(pdata,
> +                                               tval & TSENSOR_READ_TEMP_MASK);
> +
> +       return 0;
> +}
> +
> +static const struct thermal_zone_of_device_ops amlogic_thermal_ops = {
> +       .get_temp       = amlogic_thermal_get_temp,
> +};
> +
> +static const struct regmap_config amlogic_thermal_regmap_config_g12a = {
> +       .reg_bits = 8,
> +       .val_bits = 32,
> +       .reg_stride = 4,
> +       .max_register = TSENSOR_STAT9,
> +};
> +
> +static const struct amlogic_thermal_soc_calib_data amlogic_thermal_g12a = {
> +       .A = 9411,
> +       .B = 3159,
> +       .m = 424,
> +       .n = 324,
> +};
> +
> +static const struct amlogic_thermal_data amlogic_thermal_g12a_cpu_param = {
> +       .u_efuse_off = 0x128,
> +       .calibration_parameters = &amlogic_thermal_g12a,
> +       .regmap_config = &amlogic_thermal_regmap_config_g12a,
> +};
> +
> +static const struct amlogic_thermal_data amlogic_thermal_g12a_ddr_param = {
> +       .u_efuse_off = 0xf0,
> +       .calibration_parameters = &amlogic_thermal_g12a,
> +       .regmap_config = &amlogic_thermal_regmap_config_g12a,
> +};
> +
> +static const struct of_device_id of_amlogic_thermal_match[] = {
> +       {
> +               .compatible = "amlogic,g12a-ddr-thermal",
> +               .data = &amlogic_thermal_g12a_ddr_param,
> +       },
> +       {
> +               .compatible = "amlogic,g12a-cpu-thermal",
> +               .data = &amlogic_thermal_g12a_cpu_param,
> +       },
> +       { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, of_amlogic_thermal_match);
> +
> +static int amlogic_thermal_probe(struct platform_device *pdev)
> +{
> +       struct amlogic_thermal *pdata;
> +       struct device *dev = &pdev->dev;
> +       struct resource *res;
> +       void __iomem *base;
> +       int ret;
> +
> +       pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> +       if (!pdata)
> +               return -ENOMEM;
> +
> +       pdata->data = of_device_get_match_data(dev);
> +       pdata->pdev = pdev;
> +       platform_set_drvdata(pdev, pdata);
> +
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

Use devm_platform_ioremap_resource instead.

> +       base = devm_ioremap_resource(dev, res);
> +       if (IS_ERR(base)) {
> +               dev_err(dev, "failed to get io address\n");
> +               return PTR_ERR(base);
> +       }
> +
> +       pdata->regmap = devm_regmap_init_mmio(dev, base,
> +                                             pdata->data->regmap_config);
> +       if (IS_ERR(pdata->regmap))
> +               return PTR_ERR(pdata->regmap);
> +
> +       pdata->clk = devm_clk_get(dev, NULL);
> +       if (IS_ERR(pdata->clk)) {
> +               if (PTR_ERR(pdata->clk) != -EPROBE_DEFER)
> +                       dev_err(dev, "failed to get clock\n");
> +               return PTR_ERR(pdata->clk);
> +       }
> +
> +       pdata->sec_ao_map = syscon_regmap_lookup_by_phandle
> +               (pdev->dev.of_node, "amlogic,ao-secure");
> +       if (IS_ERR(pdata->sec_ao_map)) {
> +               dev_err(dev, "syscon regmap lookup failed.\n");
> +               return PTR_ERR(pdata->sec_ao_map);
> +       }
> +
> +       pdata->tzd = devm_thermal_zone_of_sensor_register(&pdev->dev,
> +                                                         0,
> +                                                         pdata,
> +                                                         &amlogic_thermal_ops);
> +       if (IS_ERR(pdata->tzd)) {
> +               ret = PTR_ERR(pdata->tzd);
> +               dev_err(dev, "Failed to register tsensor: %d\n", ret);
> +               return PTR_ERR(pdata->tzd);

return ret;

> +       }
> +
> +       ret = amlogic_thermal_initialize(pdata);
> +       if (ret)
> +               return ret;
> +
> +       ret = amlogic_thermal_enable(pdata);
> +
> +       return ret;
> +}
> +
> +static int amlogic_thermal_remove(struct platform_device *pdev)
> +{
> +       struct amlogic_thermal *data = platform_get_drvdata(pdev);
> +
> +       return amlogic_thermal_disable(data);
> +}
> +
> +static int __maybe_unused amlogic_thermal_suspend(struct device *dev)
> +{
> +       struct amlogic_thermal *data = dev_get_drvdata(dev);
> +
> +       return amlogic_thermal_disable(data);
> +}
> +
> +static int __maybe_unused amlogic_thermal_resume(struct device *dev)
> +{
> +       struct amlogic_thermal *data = dev_get_drvdata(dev);
> +
> +       return amlogic_thermal_enable(data);
> +}
> +
> +static SIMPLE_DEV_PM_OPS(amlogic_thermal_pm_ops,
> +                        amlogic_thermal_suspend, amlogic_thermal_resume);
> +
> +static struct platform_driver amlogic_thermal_driver = {
> +       .driver = {
> +               .name           = "amlogic_thermal",
> +               .pm             = &amlogic_thermal_pm_ops,
> +               .of_match_table = of_amlogic_thermal_match,
> +       },
> +       .probe  = amlogic_thermal_probe,
> +       .remove = amlogic_thermal_remove,
> +};
> +
> +module_platform_driver(amlogic_thermal_driver);
> +
> +MODULE_AUTHOR("Guillaume La Roque <glaroque@baylibre.com>");
> +MODULE_DESCRIPTION("Amlogic thermal driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.17.1
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v4 1/6] dt-bindings: thermal: Add DT bindings documentation for Amlogic Thermal
  2019-08-21 22:24 ` [PATCH v4 1/6] dt-bindings: thermal: Add DT bindings documentation for Amlogic Thermal Guillaume La Roque
  2019-08-21 23:40   ` Kevin Hilman
@ 2019-09-13 10:41   ` Amit Kucheria
  1 sibling, 0 replies; 16+ messages in thread
From: Amit Kucheria @ 2019-09-13 10:41 UTC (permalink / raw)
  To: Guillaume La Roque
  Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Linux PM list, Daniel Lezcano, LKML, Eduardo Valentin,
	linux-amlogic, Zhang Rui, lakml

On Thu, Aug 22, 2019 at 3:54 AM Guillaume La Roque
<glaroque@baylibre.com> wrote:
>
> Adding the devicetree binding documentation for the Amlogic temperature
> sensor found in the Amlogic Meson G12 SoCs.
> the G12A  and G12B SoCs are supported.

Merge the two sentences into a single one?

> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
>  .../bindings/thermal/amlogic,thermal.yaml     | 54 +++++++++++++++++++
>  1 file changed, 54 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
>
> diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> new file mode 100644
> index 000000000000..f761681e4c0d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> @@ -0,0 +1,54 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/amlogic,thermal.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Thermal
> +
> +maintainers:
> +  - Guillaume La Roque <glaroque@baylibre.com>
> +
> +description: Binding for Amlogic Thermal
> +
> +properties:
> +  compatible:
> +      items:
> +        - enum:
> +            - amlogic,g12a-cpu-thermal
> +            - amlogic,g12a-ddr-thermal
> +        - const: amlogic,g12a-thermal
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  amlogic,ao-secure:
> +    description: phandle to the ao-secure syscon
> +    $ref: '/schemas/types.yaml#/definitions/phandle'
> +
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - amlogic,ao-secure
> +
> +examples:
> +  - |
> +        cpu_temp: temperature-sensor@ff634800 {
> +                compatible = "amlogic,g12a-cpu-thermal",
> +                             "amlogic,g12a-thermal";
> +                reg = <0xff634800 0x50>;
> +                interrupts = <0x0 0x24 0x0>;
> +                clocks = <&clk 164>;
> +                #thermal-sensor-cells = <0>;
> +                amlogic,ao-secure = <&sec_AO>;
> +        };
> +...
> --
> 2.17.1
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

end of thread, back to index

Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-21 22:24 [PATCH v4 0/6] Add support of New Amlogic temperature sensor for G12 SoCs Guillaume La Roque
2019-08-21 22:24 ` [PATCH v4 1/6] dt-bindings: thermal: Add DT bindings documentation for Amlogic Thermal Guillaume La Roque
2019-08-21 23:40   ` Kevin Hilman
2019-09-13 10:41   ` Amit Kucheria
2019-08-21 22:24 ` [PATCH v4 2/6] thermal: amlogic: Add thermal driver to support G12 SoCs Guillaume La Roque
2019-08-29 18:11   ` Kevin Hilman
2019-09-13  9:21   ` Amit Kucheria
2019-08-21 22:24 ` [PATCH v4 3/6] arm64: dts: amlogic: g12: add temperature sensor Guillaume La Roque
2019-08-21 22:24 ` [PATCH v4 4/6] arm64: dts: meson: sei510: Add minimal thermal zone Guillaume La Roque
2019-08-21 23:29   ` Kevin Hilman
2019-08-22  9:15     ` Neil Armstrong
2019-08-22 19:59       ` Kevin Hilman
2019-09-13  7:47     ` Amit Kucheria
2019-08-21 22:24 ` [PATCH v4 5/6] arm64: dts: amlogic: odroid-n2: add " Guillaume La Roque
2019-08-21 22:24 ` [PATCH v4 6/6] MAINTAINERS: add entry for Amlogic Thermal driver Guillaume La Roque
2019-08-21 23:39 ` [PATCH v4 0/6] Add support of New Amlogic temperature sensor for G12 SoCs Kevin Hilman

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org infradead-linux-arm-kernel@archiver.kernel.org
	public-inbox-index linux-arm-kernel


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox