* Turris MOX Mainline Kernel
@ 2019-11-28 16:28 Leigh Brown
2019-11-29 15:21 ` Marek Behún
0 siblings, 1 reply; 2+ messages in thread
From: Leigh Brown @ 2019-11-28 16:28 UTC (permalink / raw)
To: Linux-arm Kernel; +Cc: Marek Behun
Hello,
I have a Turris MOX Classic and would like to run Debian Linux on it (it
will replace my aging Mirabox). I have installed Debian using
debootstrap and it is working well enough to boot using the original
kernel. However, that kernel is not really suitable for Debian, and I
would like to compile my own.
I noticed there were some updates in v5.4 for the MOX, so I tried to
build my own kernel. I trimmed a lot of things out of the configuration
in order to test it, with the aim of adding things back in once it was
working.
The configuration is at
https://www.solinno.co.uk/public/moxboot/config-5.4.0
However, it is hanging during boot, a log of which I've pasted below.
Is there a known-working config or a set of patches that I can use to
obtain a working kernel (as new as possible, preferably)?
Any help would be gratefully received.
Regards,
Leigh.
U-Boot 2018.11 (Dec 16 2018 - 12:50:19 +0000), Build:
jenkins-turris-os-packages-kittens-mox-90
DRAM: 512 MiB
Enabling Armada 3720 wComphy-0: SGMII1 3.125 Gbps
Comphy-1: PEX0 5 Gbps
Comphy-2: USB3_HOST0 5 Gbps
MMC: sdhci@d8000: 0
Loading Environment from SPI Flash... SF: Detected w25q64dw with page
size 256 Bytes, erase size 4 KiB, total 8 MiB
OK
Model: CZ.NIC Turris Mox Board
Net: eth0: neta@30000
Turris Mox:
Board version: 22
RAM size: 512 MiB
Serial Number: 0000000D300047B1
ECDSA Public Key:
0200d47c6be637dd555e8f8811bc5595befd7a0c3cfaeb4d2e75ff4642dccf8ea9078e543f6f975387176c5358b7ded85988bb1507d69254415017ce9ead665ad4479b
SD/eMMC version: SD
Module Topology:
1: Mini-PCIe Module
2: Topaz Switch Module (4-port)
Hit any key to stop autoboot: 0
=> load mmc 0 $fdt_addr_r
/boot/armada-3720-turris-mox.dtb-5.4.0-74f166b6e62f940eed4dd449b16c3142
19952 bytes read in 20 ms (973.6 KiB/s)
=> load mmc 0 $kernel_addr_r
/boot/vmlinuz-5.4.0-74f166b6e62f940eed4dd449b16c3142
8595464 bytes read in 376 ms (21.8 MiB/s)
=> load mmc 0 $ramdisk_addr_r
/boot/initrd.img-5.4.0-74f166b6e62f940eed4dd449b16c3142
4573517 bytes read in 199 ms (21.9 MiB/s)
=> setenv bootargs console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000
root=/dev/mmcblk1p1 rootwait
=> booti $kernel_addr_r $ramdisk_addr_r:45c94d $fdt_addr_r
## Flattened Device Tree blob at 04f00000
Booting using the fdt blob at 0x4f00000
Loading Ramdisk to 1bac2000, end 1bf1e94d ... OK
Loading Device Tree to 000000001baba000, end 000000001bac1def ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.4.0-74f166b6e62f940eed4dd449b16c3142
(leigh@dish) (gcc version 8.3.0 (Debian 8.3.0-2)) #13 SMP Thu Nov 28
15:22:22 GMT 2019
[ 0.000000] Machine model: CZ.NIC Turris Mox Board
[ 0.000000] earlycon: ar3700_uart0 at MMIO 0x00000000d0012000
(options '')
[ 0.000000] printk: bootconsole [ar3700_uart0] enabled
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 16 pages/cpu s26648 r8192 d30696 u65536
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] Speculative Store Bypass Disable mitigation not required
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages:
128512
[ 0.000000] Kernel command line: console=ttyMV0,115200
earlycon=ar3700_uart,0xd0012000 root=/dev/mmcblk1p1 rootwait
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288
bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144
bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 490684K/522240K available (6142K kernel code,
394K rwdata, 1440K rodata, 384K init, 274K bss, 31556K reserved, 0K
cma-reserved)
[ 0.000000] random: get_random_u64 called from
cache_random_seq_create+0x7c/0x150 with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2,
Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to
nr_cpu_ids=2.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay
is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16,
nr_cpu_ids=2
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 192 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: no VLPI support, no direct LPI support
[ 0.000000] GICv3: CPU0: found redistributor 0 region
0:0x00000000d1d40000
[ 0.000000] arch_timer: cp15 timer(s) running at 12.50MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff
max_cycles: 0x2e2049cda, max_idle_ns: 440795202628 ns
[ 0.000004] sched_clock: 56 bits at 12MHz, resolution 80ns, wraps
every 4398046511080ns
[ 0.008400] Console: colour dummy device 80x25
[ 0.012911] Calibrating delay loop (skipped), value calculated using
timer frequency.. 25.00 BogoMIPS (lpj=125000)
[ 0.023557] pid_max: default: 32768 minimum: 301
[ 0.028451] Mount-cache hash table entries: 1024 (order: 1, 8192
bytes, linear)
[ 0.035907] Mountpoint-cache hash table entries: 1024 (order: 1, 8192
bytes, linear)
[ 0.045139] ASID allocator initialised with 32768 entries
[ 0.050728] rcu: Hierarchical SRCU implementation.
[ 0.056022] smp: Bringing up secondary CPUs ...
[ 0.061026] Detected VIPT I-cache on CPU1
[ 0.061058] GICv3: CPU1: found redistributor 1 region
0:0x00000000d1d60000
[ 0.061092] CPU1: Booted secondary processor 0x0000000001
[0x410fd034]
[ 0.061182] smp: Brought up 1 node, 2 CPUs
[ 0.083239] SMP: Total of 2 processors activated.
[ 0.088072] CPU features: detected: 32-bit EL0 Support
[ 0.093364] CPU features: detected: CRC32 instructions
[ 0.098677] CPU: All CPU(s) started at EL2
[ 0.102864] alternatives: patching kernel code
[ 0.108102] devtmpfs: initialized
[ 0.113815] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.123900] futex hash table entries: 512 (order: 3, 32768 bytes,
linear)
[ 0.131006] pinctrl core: initialized pinctrl subsystem
[ 0.137451] NET: Registered protocol family 16
[ 0.142279] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.149020] cpuidle: using governor ladder
[ 0.168371] cryptd: max_cpu_qlen set to 1000
[ 0.176344] SCSI subsystem initialized
[ 0.180334] usbcore: registered new interface driver usbfs
[ 0.186045] usbcore: registered new interface driver hub
[ 0.191492] usbcore: registered new device driver usb
[ 0.198639] clocksource: Switched to clocksource arch_sys_counter
[ 0.214616] thermal_sys: Registered thermal governor 'step_wise'
[ 0.214879] NET: Registered protocol family 2
[ 0.226030] tcp_listen_portaddr_hash hash table entries: 256 (order:
0, 4096 bytes, linear)
[ 0.234583] TCP established hash table entries: 4096 (order: 3, 32768
bytes, linear)
[ 0.242568] TCP bind hash table entries: 4096 (order: 4, 65536 bytes,
linear)
[ 0.249948] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.256522] UDP hash table entries: 256 (order: 1, 8192 bytes,
linear)
[ 0.263181] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes,
linear)
[ 0.270494] NET: Registered protocol family 1
[ 0.274915] PCI: CLS 0 bytes, default 64
[ 0.279095] Unpacking initramfs...
[ 0.497206] Freeing initrd memory: 4464K
[ 0.502312] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[ 0.513721] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.524495] advk-pcie d0070000.pcie: host bridge /soc/pcie@d0070000
ranges:
[ 0.531648] advk-pcie d0070000.pcie: MEM 0xe8000000..0xe8ffffff ->
0xe8000000
[ 0.539161] advk-pcie d0070000.pcie: IO 0xe9000000..0xe900ffff ->
0xe9000000
[ 1.538553] advk-pcie d0070000.pcie: link never came up
[ 1.544015] advk-pcie d0070000.pcie: PCI host bridge to bus 0000:00
[ 1.550404] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.556032] pci_bus 0000:00: root bus resource [mem
0xe8000000-0xe8ffffff]
[ 1.563117] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
(bus address [0xe9000000-0xe900ffff])
[ 1.572919] pci 0000:00:00.0: [1b4b:0100] type 01 class 0x060400
[ 1.579082] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x000007ff
pref]
[ 1.586988] pci 0000:00:00.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 1.598544] advk-pcie d0070000.pcie: config read/write timed out
[ 1.605462] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to
01
[ 1.612225] pci 0000:00:00.0: BAR 6: assigned [mem
0xe8000000-0xe80007ff pref]
[ 1.619636] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.626489] mv_xor d0060900.xor: Marvell shared XOR driver
[ 1.709390] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor
cpy intr )
[ 1.779372] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor
cpy intr )
[ 1.787395] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 1.795922] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 1.803309] moxtet spi0.1: Found MOX A (CPU) module
[ 1.808255] moxtet spi0.1: Found MOX B (Mini-PCIe) module
[ 1.813825] moxtet spi0.1: Found MOX C (4 port switch) module
[ 1.820808] libphy: Fixed MDIO Bus: probed
[ 1.825463] orion-mdio d0032004.mdio: IRQ index 0 not found
[ 1.831272] libphy: orion_mdio_bus: probed
[ 1.845871] mvneta d0030000.ethernet eth0: Using hardware mac address
d8:58:d7:00:c0:2a
[ 1.854650] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 1.861318] ehci-pci: EHCI PCI platform driver
[ 1.865917] ehci-platform: EHCI generic platform driver
[ 1.871393] ehci-orion: EHCI orion driver
[ 1.875624] orion-ehci d005e000.usb: EHCI Host Controller
[ 1.881134] orion-ehci d005e000.usb: new USB bus registered, assigned
bus number 1
[ 1.889021] orion-ehci d005e000.usb: irq 15, io mem 0xd005e000
[ 1.918595] orion-ehci d005e000.usb: USB 2.0 started, EHCI 1.00
[ 1.925258] hub 1-0:1.0: USB hub found
[ 1.929156] hub 1-0:1.0: 1 port detected
[ 1.933409] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.940827] i2c /dev entries driver
[ 1.945209] armada_37xx_wdt d0008300.watchdog: Initial timeout 120
sec, nowayout
[ 1.953436] sdhci: Secure Digital Host Controller Interface driver
[ 1.959735] sdhci: Copyright(c) Pierre Ossman
[ 1.964330] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.970432] xenon-sdhci d00d0000.sdhci: allocated mmc-pwrseq
[ 1.976392] xenon-sdhci d00d8000.sdhci: Got CD GPIO
[ 1.982839] NET: Registered protocol family 10
[ 1.988218] Segment Routing with IPv6
[ 1.991996] NET: Registered protocol family 17
[ 1.996544] bridge: filtering via arp/ip/ip6tables is no longer
available by default. Update your scripts to load br_netfilter if you
need this.
[ 2.009846] 8021q: 802.1Q VLAN Support v1.8
[ 2.014175] Key type dns_resolver registered
[ 2.021049] d0012000.serial: ttyMV0 at MMIO 0xd0012000 (irq = 0,
base_baud = 1562500) is a mvebu-uart
[ 2.030515] printk: console [ttyMV0] enabled
[ 2.030515] printk: console [ttyMV0] enabled
[ 2.039262] printk: bootconsole [ar3700_uart0] disabled
[ 2.039262] printk: bootconsole [ar3700_uart0] disabled
[ 2.052998] rtc-ds1307 0-006f: registered as rtc0
[ 2.055035] i2c i2c-0: PXA I2C adapter
[ 2.060950] mvneta d0040000.ethernet eth1: Using device tree mac
address d8:58:d7:00:c0:2b
[ 62.078548] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 62.081799] rcu: 1-...0: (1 GPs behind)
idle=97a/1/0x4000000000000000 softirq=207/208 fqs=3000
[ 62.090842] (detected by 0, t=6002 jiffies, g=-1011, q=265)
[ 62.096665] Task dump for CPU 1:
[ 62.099980] kworker/1:1 R running task 0 29 2
0x0000000a
[ 62.107253] Workqueue: events deferred_probe_work_func
[ 62.112523] Call trace:
[ 62.115037] __switch_to+0xc4/0x108
[ 62.118620] vprintk_emit+0x1ec/0x290
[ 62.122382] dev_vprintk_emit+0x1d0/0x200
[ 62.126503] 0xffffffff00567c80
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Turris MOX Mainline Kernel
2019-11-28 16:28 Turris MOX Mainline Kernel Leigh Brown
@ 2019-11-29 15:21 ` Marek Behún
0 siblings, 0 replies; 2+ messages in thread
From: Marek Behún @ 2019-11-29 15:21 UTC (permalink / raw)
To: Leigh Brown; +Cc: Linux-arm Kernel
Hi,
I have compiled 5.4.1 with your configuration and it works. The only
differences are that I added BTRFS driver (since my root is on btrfs),
different boot command line and that it is 5.4.1 instead of 5.4.0.
My command line is
earlycon=ar3700_uart,0xd0012000 console=ttyMV0,115200 rootwait
rootfstype=btrfs root=PARTUUID=00000000-01
rootflags=commit=5,subvol=/root
Looking at your kernel output it seems to me that kernel won't find
your SD card and because of the rootwait flag waits for the root
filesystem indefinitely.
Your output contains
xenon-sdhci d00d0000.sdhci: allocated mmc-pwrseq
xenon-sdhci d00d8000.sdhci: Got CD GPIO
but it should also contain
mmc0: SDHCI controller on d00d0000.sdhci [d00d0000.sdhci] using ADMA
mmc1: SDHCI controller on d00d8000.sdhci [d00d8000.sdhci] using ADMA
which it for some reason doesn't.
Marek
On Thu, 28 Nov 2019 16:28:40 +0000
Leigh Brown <leigh@solinno.co.uk> wrote:
> Hello,
>
> I have a Turris MOX Classic and would like to run Debian Linux on it
> (it will replace my aging Mirabox). I have installed Debian using
> debootstrap and it is working well enough to boot using the original
> kernel. However, that kernel is not really suitable for Debian, and I
> would like to compile my own.
>
> I noticed there were some updates in v5.4 for the MOX, so I tried to
> build my own kernel. I trimmed a lot of things out of the
> configuration in order to test it, with the aim of adding things back
> in once it was working.
>
> The configuration is at
> https://www.solinno.co.uk/public/moxboot/config-5.4.0
>
> However, it is hanging during boot, a log of which I've pasted
> below. Is there a known-working config or a set of patches that I can
> use to obtain a working kernel (as new as possible, preferably)?
>
> Any help would be gratefully received.
>
> Regards,
>
> Leigh.
>
>
> U-Boot 2018.11 (Dec 16 2018 - 12:50:19 +0000), Build:
> jenkins-turris-os-packages-kittens-mox-90
>
> DRAM: 512 MiB
> Enabling Armada 3720 wComphy-0: SGMII1 3.125 Gbps
> Comphy-1: PEX0 5 Gbps
> Comphy-2: USB3_HOST0 5 Gbps
> MMC: sdhci@d8000: 0
> Loading Environment from SPI Flash... SF: Detected w25q64dw with page
> size 256 Bytes, erase size 4 KiB, total 8 MiB
> OK
> Model: CZ.NIC Turris Mox Board
> Net: eth0: neta@30000
> Turris Mox:
> Board version: 22
> RAM size: 512 MiB
> Serial Number: 0000000D300047B1
> ECDSA Public Key:
> 0200d47c6be637dd555e8f8811bc5595befd7a0c3cfaeb4d2e75ff4642dccf8ea9078e543f6f975387176c5358b7ded85988bb1507d69254415017ce9ead665ad4479b
> SD/eMMC version: SD
> Module Topology:
> 1: Mini-PCIe Module
> 2: Topaz Switch Module (4-port)
>
> Hit any key to stop autoboot: 0
> => load mmc 0 $fdt_addr_r
> /boot/armada-3720-turris-mox.dtb-5.4.0-74f166b6e62f940eed4dd449b16c3142
> 19952 bytes read in 20 ms (973.6 KiB/s)
> => load mmc 0 $kernel_addr_r
> /boot/vmlinuz-5.4.0-74f166b6e62f940eed4dd449b16c3142
> 8595464 bytes read in 376 ms (21.8 MiB/s)
> => load mmc 0 $ramdisk_addr_r
> /boot/initrd.img-5.4.0-74f166b6e62f940eed4dd449b16c3142
> 4573517 bytes read in 199 ms (21.9 MiB/s)
> => setenv bootargs console=ttyMV0,115200
> earlycon=ar3700_uart,0xd0012000 root=/dev/mmcblk1p1 rootwait
> => booti $kernel_addr_r $ramdisk_addr_r:45c94d $fdt_addr_r
> ## Flattened Device Tree blob at 04f00000
> Booting using the fdt blob at 0x4f00000
> Loading Ramdisk to 1bac2000, end 1bf1e94d ... OK
> Loading Device Tree to 000000001baba000, end 000000001bac1def ...
> OK
>
> Starting kernel ...
>
> [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
> [ 0.000000] Linux version 5.4.0-74f166b6e62f940eed4dd449b16c3142
> (leigh@dish) (gcc version 8.3.0 (Debian 8.3.0-2)) #13 SMP Thu Nov 28
> 15:22:22 GMT 2019
> [ 0.000000] Machine model: CZ.NIC Turris Mox Board
> [ 0.000000] earlycon: ar3700_uart0 at MMIO 0x00000000d0012000
> (options '')
> [ 0.000000] printk: bootconsole [ar3700_uart0] enabled
> [ 0.000000] psci: probing for conduit method from DT.
> [ 0.000000] psci: PSCIv1.1 detected in firmware.
> [ 0.000000] psci: Using standard PSCI v0.2 function IDs
> [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
> [ 0.000000] psci: SMC Calling Convention v1.1
> [ 0.000000] percpu: Embedded 16 pages/cpu s26648 r8192 d30696
> u65536 [ 0.000000] Detected VIPT I-cache on CPU0
> [ 0.000000] CPU features: detected: GIC system register CPU
> interface [ 0.000000] Speculative Store Bypass Disable mitigation
> not required [ 0.000000] Built 1 zonelists, mobility grouping on.
> Total pages: 128512
> [ 0.000000] Kernel command line: console=ttyMV0,115200
> earlycon=ar3700_uart,0xd0012000 root=/dev/mmcblk1p1 rootwait
> [ 0.000000] Dentry cache hash table entries: 65536 (order: 7,
> 524288 bytes, linear)
> [ 0.000000] Inode-cache hash table entries: 32768 (order: 6,
> 262144 bytes, linear)
> [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> [ 0.000000] Memory: 490684K/522240K available (6142K kernel code,
> 394K rwdata, 1440K rodata, 384K init, 274K bss, 31556K reserved, 0K
> cma-reserved)
> [ 0.000000] random: get_random_u64 called from
> cache_random_seq_create+0x7c/0x150 with crng_init=0
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2,
> Nodes=1
> [ 0.000000] rcu: Hierarchical RCU implementation.
> [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to
> nr_cpu_ids=2.
> [ 0.000000] rcu: RCU calculated value of scheduler-enlistment
> delay is 10 jiffies.
> [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16,
> nr_cpu_ids=2
> [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
> [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
> [ 0.000000] GICv3: 192 SPIs implemented
> [ 0.000000] GICv3: 0 Extended SPIs implemented
> [ 0.000000] GICv3: Distributor has no Range Selector support
> [ 0.000000] GICv3: 16 PPIs implemented
> [ 0.000000] GICv3: no VLPI support, no direct LPI support
> [ 0.000000] GICv3: CPU0: found redistributor 0 region
> 0:0x00000000d1d40000
> [ 0.000000] arch_timer: cp15 timer(s) running at 12.50MHz (phys).
> [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff
> max_cycles: 0x2e2049cda, max_idle_ns: 440795202628 ns
> [ 0.000004] sched_clock: 56 bits at 12MHz, resolution 80ns, wraps
> every 4398046511080ns
> [ 0.008400] Console: colour dummy device 80x25
> [ 0.012911] Calibrating delay loop (skipped), value calculated
> using timer frequency.. 25.00 BogoMIPS (lpj=125000)
> [ 0.023557] pid_max: default: 32768 minimum: 301
> [ 0.028451] Mount-cache hash table entries: 1024 (order: 1, 8192
> bytes, linear)
> [ 0.035907] Mountpoint-cache hash table entries: 1024 (order: 1,
> 8192 bytes, linear)
> [ 0.045139] ASID allocator initialised with 32768 entries
> [ 0.050728] rcu: Hierarchical SRCU implementation.
> [ 0.056022] smp: Bringing up secondary CPUs ...
> [ 0.061026] Detected VIPT I-cache on CPU1
> [ 0.061058] GICv3: CPU1: found redistributor 1 region
> 0:0x00000000d1d60000
> [ 0.061092] CPU1: Booted secondary processor 0x0000000001
> [0x410fd034]
> [ 0.061182] smp: Brought up 1 node, 2 CPUs
> [ 0.083239] SMP: Total of 2 processors activated.
> [ 0.088072] CPU features: detected: 32-bit EL0 Support
> [ 0.093364] CPU features: detected: CRC32 instructions
> [ 0.098677] CPU: All CPU(s) started at EL2
> [ 0.102864] alternatives: patching kernel code
> [ 0.108102] devtmpfs: initialized
> [ 0.113815] clocksource: jiffies: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 19112604462750000 ns
> [ 0.123900] futex hash table entries: 512 (order: 3, 32768 bytes,
> linear)
> [ 0.131006] pinctrl core: initialized pinctrl subsystem
> [ 0.137451] NET: Registered protocol family 16
> [ 0.142279] DMA: preallocated 256 KiB pool for atomic allocations
> [ 0.149020] cpuidle: using governor ladder
> [ 0.168371] cryptd: max_cpu_qlen set to 1000
> [ 0.176344] SCSI subsystem initialized
> [ 0.180334] usbcore: registered new interface driver usbfs
> [ 0.186045] usbcore: registered new interface driver hub
> [ 0.191492] usbcore: registered new device driver usb
> [ 0.198639] clocksource: Switched to clocksource arch_sys_counter
> [ 0.214616] thermal_sys: Registered thermal governor 'step_wise'
> [ 0.214879] NET: Registered protocol family 2
> [ 0.226030] tcp_listen_portaddr_hash hash table entries: 256
> (order: 0, 4096 bytes, linear)
> [ 0.234583] TCP established hash table entries: 4096 (order: 3,
> 32768 bytes, linear)
> [ 0.242568] TCP bind hash table entries: 4096 (order: 4, 65536
> bytes, linear)
> [ 0.249948] TCP: Hash tables configured (established 4096 bind
> 4096) [ 0.256522] UDP hash table entries: 256 (order: 1, 8192
> bytes, linear)
> [ 0.263181] UDP-Lite hash table entries: 256 (order: 1, 8192
> bytes, linear)
> [ 0.270494] NET: Registered protocol family 1
> [ 0.274915] PCI: CLS 0 bytes, default 64
> [ 0.279095] Unpacking initramfs...
> [ 0.497206] Freeing initrd memory: 4464K
> [ 0.502312] workingset: timestamp_bits=46 max_order=17
> bucket_order=0 [ 0.513721] squashfs: version 4.0 (2009/01/31)
> Phillip Lougher [ 0.524495] advk-pcie d0070000.pcie: host
> bridge /soc/pcie@d0070000 ranges:
> [ 0.531648] advk-pcie d0070000.pcie: MEM 0xe8000000..0xe8ffffff
> -> 0xe8000000
> [ 0.539161] advk-pcie d0070000.pcie: IO 0xe9000000..0xe900ffff
> -> 0xe9000000
> [ 1.538553] advk-pcie d0070000.pcie: link never came up
> [ 1.544015] advk-pcie d0070000.pcie: PCI host bridge to bus 0000:00
> [ 1.550404] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 1.556032] pci_bus 0000:00: root bus resource [mem
> 0xe8000000-0xe8ffffff]
> [ 1.563117] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
> (bus address [0xe9000000-0xe900ffff])
> [ 1.572919] pci 0000:00:00.0: [1b4b:0100] type 01 class 0x060400
> [ 1.579082] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x000007ff
> pref]
> [ 1.586988] pci 0000:00:00.0: bridge configuration invalid ([bus
> 00-00]), reconfiguring
> [ 1.598544] advk-pcie d0070000.pcie: config read/write timed out
> [ 1.605462] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated
> to 01
> [ 1.612225] pci 0000:00:00.0: BAR 6: assigned [mem
> 0xe8000000-0xe80007ff pref]
> [ 1.619636] pci 0000:00:00.0: PCI bridge to [bus 01]
> [ 1.626489] mv_xor d0060900.xor: Marvell shared XOR driver
> [ 1.709390] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode):
> ( xor cpy intr )
> [ 1.779372] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode):
> ( xor cpy intr )
> [ 1.787395] Serial: 8250/16550 driver, 16 ports, IRQ sharing
> enabled [ 1.795922] cacheinfo: Unable to detect cache hierarchy
> for CPU 0 [ 1.803309] moxtet spi0.1: Found MOX A (CPU) module
> [ 1.808255] moxtet spi0.1: Found MOX B (Mini-PCIe) module
> [ 1.813825] moxtet spi0.1: Found MOX C (4 port switch) module
> [ 1.820808] libphy: Fixed MDIO Bus: probed
> [ 1.825463] orion-mdio d0032004.mdio: IRQ index 0 not found
> [ 1.831272] libphy: orion_mdio_bus: probed
> [ 1.845871] mvneta d0030000.ethernet eth0: Using hardware mac
> address d8:58:d7:00:c0:2a
> [ 1.854650] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
> Driver
> [ 1.861318] ehci-pci: EHCI PCI platform driver
> [ 1.865917] ehci-platform: EHCI generic platform driver
> [ 1.871393] ehci-orion: EHCI orion driver
> [ 1.875624] orion-ehci d005e000.usb: EHCI Host Controller
> [ 1.881134] orion-ehci d005e000.usb: new USB bus registered,
> assigned bus number 1
> [ 1.889021] orion-ehci d005e000.usb: irq 15, io mem 0xd005e000
> [ 1.918595] orion-ehci d005e000.usb: USB 2.0 started, EHCI 1.00
> [ 1.925258] hub 1-0:1.0: USB hub found
> [ 1.929156] hub 1-0:1.0: 1 port detected
> [ 1.933409] uhci_hcd: USB Universal Host Controller Interface
> driver [ 1.940827] i2c /dev entries driver
> [ 1.945209] armada_37xx_wdt d0008300.watchdog: Initial timeout 120
> sec, nowayout
> [ 1.953436] sdhci: Secure Digital Host Controller Interface driver
> [ 1.959735] sdhci: Copyright(c) Pierre Ossman
> [ 1.964330] sdhci-pltfm: SDHCI platform and OF driver helper
> [ 1.970432] xenon-sdhci d00d0000.sdhci: allocated mmc-pwrseq
> [ 1.976392] xenon-sdhci d00d8000.sdhci: Got CD GPIO
> [ 1.982839] NET: Registered protocol family 10
> [ 1.988218] Segment Routing with IPv6
> [ 1.991996] NET: Registered protocol family 17
> [ 1.996544] bridge: filtering via arp/ip/ip6tables is no longer
> available by default. Update your scripts to load br_netfilter if you
> need this.
> [ 2.009846] 8021q: 802.1Q VLAN Support v1.8
> [ 2.014175] Key type dns_resolver registered
> [ 2.021049] d0012000.serial: ttyMV0 at MMIO 0xd0012000 (irq = 0,
> base_baud = 1562500) is a mvebu-uart
> [ 2.030515] printk: console [ttyMV0] enabled
> [ 2.030515] printk: console [ttyMV0] enabled
> [ 2.039262] printk: bootconsole [ar3700_uart0] disabled
> [ 2.039262] printk: bootconsole [ar3700_uart0] disabled
> [ 2.052998] rtc-ds1307 0-006f: registered as rtc0
> [ 2.055035] i2c i2c-0: PXA I2C adapter
> [ 2.060950] mvneta d0040000.ethernet eth1: Using device tree mac
> address d8:58:d7:00:c0:2b
> [ 62.078548] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> [ 62.081799] rcu: 1-...0: (1 GPs behind)
> idle=97a/1/0x4000000000000000 softirq=207/208 fqs=3000
> [ 62.090842] (detected by 0, t=6002 jiffies, g=-1011, q=265)
> [ 62.096665] Task dump for CPU 1:
> [ 62.099980] kworker/1:1 R running task 0 29 2
> 0x0000000a
> [ 62.107253] Workqueue: events deferred_probe_work_func
> [ 62.112523] Call trace:
> [ 62.115037] __switch_to+0xc4/0x108
> [ 62.118620] vprintk_emit+0x1ec/0x290
> [ 62.122382] dev_vprintk_emit+0x1d0/0x200
> [ 62.126503] 0xffffffff00567c80
>
>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-11-29 15:21 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-28 16:28 Turris MOX Mainline Kernel Leigh Brown
2019-11-29 15:21 ` Marek Behún
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).