Re: [v3,1/3] thermal: mediatek: Relocate driver to mediatek folder

[Michael Kao <michael.kao@mediatek.com>]

On Tue, 2021-04-20 at 23:22 +0200, Daniel Lezcano wrote:
> On 12/03/2021 04:40, Michael Kao wrote:
> > Add Mediatek proprietary folder to upstream more thermal zone and
> > cooler
> > drivers. Relocate the original thermal controller driver to it and
> > rename
> > as soc_temp.c to show its purpose more clearly.
> 
> We already know the purpose :)
> 
> soc_temp gives no additional information.
> 
> Either keep the name or give the hardware sensor name. It is a driver
> directory.
> 
Dear Daniel,

We introduce the new thermal hardware design called lvts in the new
project. The new project will desgin with lvts will enable the
CONFIG_MTK_SOC_THERMAL_LVTS to build lvts driver[1].
The old project will use CONFIG_MTK_THERMAL to build soc_temp.c.

The new design use lvts device to access thermal sensors in the soc.
The original design access thermal sensors by auxadc.

[1] [v3,2/3] thermal: mediatek: Add LVTS drivers for SoC theraml zones


> > Signed-off-by: Michael Kao <michael.kao@mediatek.com>
> > ---
> >  drivers/thermal/Kconfig                       | 14 ++++-------
> >  drivers/thermal/Makefile                      |  2 +-
> >  drivers/thermal/mediatek/Kconfig              | 23
> > +++++++++++++++++++
> >  drivers/thermal/mediatek/Makefile             |  1 +
> >  .../{mtk_thermal.c => mediatek/soc_temp.c}    |  0
> 
> [ ... ]
> 
> vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
> 
> 
> > +config MTK_THERMAL
> > +	tristate "Mediatek thermal drivers"
> > +	depends on THERMAL_OF
> > +	help
> > +	  This is the option for Mediatek thermal software
> > +	  solutions. Please enable corresponding options to
> > +	  get temperature information from thermal sensors or
> > +	  turn on throttle mechaisms for thermal mitigation.
> > +
> > +if MTK_THERMAL
> 
> 
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> 
> All the above not needed.
> 
> > +config MTK_SOC_THERMAL
> > +	tristate "Temperature sensor driver for mediatek SoCs"
> > +	depends on HAS_IOMEM
> > +	depends on NVMEM
> > +	depends on RESET_CONTROLLER
> > +	help
> > +	  Enable this option if you want to get SoC temperature
> > +	  information for Mediatek platforms. This driver
> > +	  configures thermal controllers to collect temperature
> > +	  via AUXADC interface.
> > +
> > +endif
> > diff --git a/drivers/thermal/mediatek/Makefile
> > b/drivers/thermal/mediatek/Makefile
> > new file mode 100644
> > index 000000000000..f75313ddce5e
> > --- /dev/null
> > +++ b/drivers/thermal/mediatek/Makefile
> > @@ -0,0 +1 @@
> > +obj-$(CONFIG_MTK_SOC_THERMAL)	+= soc_temp.o
> > diff --git a/drivers/thermal/mtk_thermal.c
> > b/drivers/thermal/mediatek/soc_temp.c
> > similarity index 100%
> > rename from drivers/thermal/mtk_thermal.c
> > rename to drivers/thermal/mediatek/soc_temp.c
> 
> 
> 
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel