Linux-ARM-Kernel Archive on lore.kernel.org
 help / Atom feed
From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Heinrich Schuchardt <xypron.glpk@gmx.de>,
	Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Russell King <linux@armlinux.org.uk>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org,
	Heinrich Schuchardt <xypron.glpk@gmx.de>,
	linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/1] arm64: dts: marvell: mcbin: enlarge PCI memory window
Date: Fri, 17 May 2019 22:08:00 +0200
Message-ID: <87k1eozvxb.fsf@FE-laptop> (raw)
In-Reply-To: <20190517161123.9293-1-xypron.glpk@gmx.de>

Hi Heinrich Schuchardt,

> Running a graphics adapter on the MACCHIATObin fails due to an
> insufficently sized memory window.
I think "insufficient" is enough or I miss something.

>
> Enlarge the memory window for the PCIe slot to 512 MiB.
>
> With the patch I am able to use a GT710 graphics adapter with 1 GB onboard
> memory.
>
> These are the mapped memory areas that the graphics adapter is actually
> using:
>
> Region 0: Memory at cc000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M]
> Region 3: Memory at c8000000 (64-bit, prefetchable) [size=32M]
> Region 5: I/O ports at 1000 [size=128]
> Expansion ROM at ca000000 [disabled] [size=512K]

From my point of view this patch is correct, I don't think it is a
problem to map more memory. So I applied on it mvebu/dt64.

But I add also Thomas in CC who know better the PCIe support on mvebu/

Thanks,

Gregory


>
> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
> ---
>  arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
> index 329f8ceeebea..205071b45a32 100644
> --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
> @@ -184,6 +184,8 @@
>  	num-lanes = <4>;
>  	num-viewport = <8>;
>  	reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
> +	ranges = <0x81000000 0x0 0xf9010000 0x0 0xf9010000 0x0 0x10000
> +		  0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
>  	status = "okay";
>  };
>
> --
> 2.20.1
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-17 16:11 Heinrich Schuchardt
2019-05-17 20:08 ` Gregory CLEMENT [this message]
2019-05-17 20:55   ` Heinrich Schuchardt
2019-05-17 21:26     ` Gregory CLEMENT
2019-05-20 15:54 ` Thomas Petazzoni

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87k1eozvxb.fsf@FE-laptop \
    --to=gregory.clement@bootlin.com \
    --cc=andrew@lunn.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=xypron.glpk@gmx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org infradead-linux-arm-kernel@archiver.kernel.org
	public-inbox-index linux-arm-kernel


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox