Linux-ARM-Kernel Archive on lore.kernel.org
 help / Atom feed
* [GIT PULL] ARM: mvebu: fixes for v5.0 (#1)
@ 2019-01-11 16:58 Gregory CLEMENT
  2019-01-13  6:04 ` Olof Johansson
  0 siblings, 1 reply; 2+ messages in thread
From: Gregory CLEMENT @ 2019-01-11 16:58 UTC (permalink / raw)
  To: Arnd Bergmann, Olof Johansson, arm
  Cc: Andrew Lunn, Jason Cooper, linux-arm-kernel, Sebastian Hesselbarth

Hi,

Here is the first pull request for fixes for mvebu for v5.0.

Gregory

The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:

  Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)

are available in the Git repository at:

  git://git.infradead.org/linux-mvebu.git tags/mvebu-fixes-5.0-1

for you to fetch changes up to b5f034845e70916fd33e172fad5ad530a29c10ab:

  ARM: dts: kirkwood: Fix polarity of GPIO fan lines (2019-01-10 12:23:47 +0100)

----------------------------------------------------------------
mvebu fixes for 5.0

They are all device tree fixes which also worth being in stable:

 - Reserve PSCI area on Armada 7K/8K preventing the kernel accessing
   this area and crashing while doing it.

 - Use correct PCIe reset signal on MACCHIATOBin  (Armada 8040 based)

 - Fix polarity of GPIO fan line D-Link DNS NASes(kikwood based)

----------------------------------------------------------------
Baruch Siach (1):
      arm64: dts: marvell: mcbin: fix PCIe reset signal

Heinrich Schuchardt (1):
      arm64: dts: marvell: armada-ap806: reserve PSCI area

Linus Walleij (1):
      ARM: dts: kirkwood: Fix polarity of GPIO fan lines

 arch/arm/boot/dts/kirkwood-dnskw.dtsi              |  4 ++--
 arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi |  2 +-
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi      | 17 +++++++++++++++++
 3 files changed, 20 insertions(+), 3 deletions(-)

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [GIT PULL] ARM: mvebu: fixes for v5.0 (#1)
  2019-01-11 16:58 [GIT PULL] ARM: mvebu: fixes for v5.0 (#1) Gregory CLEMENT
@ 2019-01-13  6:04 ` Olof Johansson
  0 siblings, 0 replies; 2+ messages in thread
From: Olof Johansson @ 2019-01-13  6:04 UTC (permalink / raw)
  To: Gregory CLEMENT
  Cc: Andrew Lunn, Jason Cooper, Arnd Bergmann, arm, linux-arm-kernel,
	Sebastian Hesselbarth

On Fri, Jan 11, 2019 at 05:58:48PM +0100, Gregory CLEMENT wrote:
> Hi,
> 
> Here is the first pull request for fixes for mvebu for v5.0.
> 
> Gregory
> 
> The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c:
> 
>   Linux 5.0-rc1 (2019-01-06 17:08:20 -0800)
> 
> are available in the Git repository at:
> 
>   git://git.infradead.org/linux-mvebu.git tags/mvebu-fixes-5.0-1
> 
> for you to fetch changes up to b5f034845e70916fd33e172fad5ad530a29c10ab:
> 
>   ARM: dts: kirkwood: Fix polarity of GPIO fan lines (2019-01-10 12:23:47 +0100)
> 
> ----------------------------------------------------------------
> mvebu fixes for 5.0
> 
> They are all device tree fixes which also worth being in stable:
> 
>  - Reserve PSCI area on Armada 7K/8K preventing the kernel accessing
>    this area and crashing while doing it.
> 
>  - Use correct PCIe reset signal on MACCHIATOBin  (Armada 8040 based)
> 
>  - Fix polarity of GPIO fan line D-Link DNS NASes(kikwood based)

Merged, thanks!


-Olof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-11 16:58 [GIT PULL] ARM: mvebu: fixes for v5.0 (#1) Gregory CLEMENT
2019-01-13  6:04 ` Olof Johansson

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org infradead-linux-arm-kernel@archiver.kernel.org
	public-inbox-index linux-arm-kernel


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox