From: Simon Horman <horms+renesas@verge.net.au>
To: linux-renesas-soc@vger.kernel.org
Cc: Fabrizio Castro <fabrizio.castro@bp.renesas.com>,
Simon Horman <horms+renesas@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 51/53] arm64: dts: renesas: r8a774a1: Add HDMI encoder instance
Date: Fri, 21 Jun 2019 11:16:29 +0200 [thread overview]
Message-ID: <8c965642354950cd17d1edff57fd5ca965040517.1561107232.git.horms+renesas@verge.net.au> (raw)
In-Reply-To: <cover.1561107232.git.horms+renesas@verge.net.au>
From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Add the HDMI encoder to the R8A774A1 DT in disabled state.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 32 +++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index b437edc04712..f209457c7807 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -2368,6 +2368,37 @@
};
};
+ hdmi0: hdmi@fead0000 {
+ compatible = "renesas,r8a774a1-hdmi",
+ "renesas,rcar-gen3-hdmi";
+ reg = <0 0xfead0000 0 0x10000>;
+ interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 729>,
+ <&cpg CPG_CORE R8A774A1_CLK_HDMI>;
+ clock-names = "iahb", "isfr";
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 729>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dw_hdmi0_in: endpoint {
+ remote-endpoint = <&du_out_hdmi0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ };
+ port@2 {
+ /* HDMI sound */
+ reg = <2>;
+ };
+ };
+ };
+
du: display@feb00000 {
compatible = "renesas,du-r8a774a1";
reg = <0 0xfeb00000 0 0x70000>;
@@ -2394,6 +2425,7 @@
port@1 {
reg = <1>;
du_out_hdmi0: endpoint {
+ remote-endpoint = <&dw_hdmi0_in>;
};
};
port@2 {
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-06-21 9:48 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-21 9:16 [GIT PULL] Renesas ARM64 Based SoC DT Updates for v5.3 Simon Horman
2019-06-21 9:15 ` [PATCH 01/53] arm64: dts: renesas: r8a774a1: Add VSP instances Simon Horman
2019-06-21 9:15 ` [PATCH 02/53] arm64: dts: renesas: r8a774a1: Add DU device to DT Simon Horman
2019-06-21 9:15 ` [PATCH 03/53] arm64: dts: renesas: r8a774a1: Add FDP1 instance Simon Horman
2019-06-21 9:15 ` [PATCH 04/53] arm64: dts: renesas: r8a774a1: Tie SYS-DMAC to IPMMU-DS0/1 Simon Horman
2019-06-21 9:15 ` [PATCH 05/53] arm64: dts: renesas: r8a774a1: Tie Audio-DMAC to IPMMU-MP Simon Horman
2019-06-21 9:15 ` [PATCH 06/53] arm64: dts: renesas: r8a774a1: Connect Ethernet-AVB to IPMMU-DS0 Simon Horman
2019-06-21 9:15 ` [PATCH 07/53] arm64: dts: renesas: cat874: Add HDMI video support Simon Horman
2019-06-21 9:15 ` [PATCH 08/53] arm64: dts: renesas: cat874: Add HDMI audio Simon Horman
2019-06-21 9:15 ` [PATCH 09/53] arm64: dts: renesas: draak: Remove unnecessary index from vin4 port Simon Horman
2019-06-21 9:15 ` [PATCH 10/53] arm64: dts: renesas: ulcb-kf: Add support for TI WL1837 Simon Horman
2019-06-21 9:15 ` [PATCH 11/53] arm64: dts: renesas: r8a7796: Add TPU support Simon Horman
2019-06-21 9:15 ` [PATCH 12/53] arm64: dts: renesas: r8a77965: " Simon Horman
2019-06-21 9:15 ` [PATCH 13/53] arm64: dts: renesas: r8a7795: " Simon Horman
2019-06-21 9:15 ` [PATCH 14/53] arm64: dts: renesas: cat874: Add WLAN support Simon Horman
2019-06-21 9:15 ` [PATCH 15/53] arm64: dts: renesas: cat874: Add BT support Simon Horman
2019-06-21 9:15 ` [PATCH 16/53] arm64: dts: renesas: Use ip=on for bootargs Simon Horman
2019-06-21 9:15 ` [PATCH 17/53] arm64: dts: renesas: r8a774c0: Clean up CPU compatibles Simon Horman
2019-06-21 9:15 ` [PATCH 18/53] arm64: dts: renesas: ebisu: Remove renesas, no-ether-link property Simon Horman
2019-06-21 9:15 ` [PATCH 19/53] arm64: dts: renesas: Revise usb2_phy nodes and phys properties Simon Horman
2019-06-21 9:15 ` [PATCH 20/53] arm64: dts: renesas: r8a7795: Create thermal zone to support IPA Simon Horman
2019-06-21 9:15 ` [PATCH 21/53] arm64: dts: renesas: r8a7795: Add dynamic power coefficient Simon Horman
2019-06-21 9:16 ` [PATCH 22/53] arm64: dts: renesas: r8a7796: Create thermal zone to support IPA Simon Horman
2019-06-21 9:16 ` [PATCH 23/53] arm64: dts: renesas: r8a7796: Add dynamic power coefficient Simon Horman
2019-06-21 9:16 ` [PATCH 24/53] arm64: dts: renesas: r8a77965: Create thermal zone to support IPA Simon Horman
2019-06-21 9:16 ` [PATCH 25/53] arm64: dts: renesas: r8a77965: Add dynamic power coefficient Simon Horman
2019-06-21 9:16 ` [PATCH 26/53] arm64: dts: renesas: r8a77990: Create thermal zone to support IPA Simon Horman
2019-06-21 9:16 ` [PATCH 27/53] arm64: dts: renesas: r8a77990: Add dynamic power coefficient Simon Horman
2019-06-21 9:16 ` [PATCH 28/53] arm64: dts: renesas: r8a774a1: Add operating points Simon Horman
2019-06-21 9:16 ` [PATCH 29/53] arm64: dts: renesas: Add HiHope RZ/G2M main board support Simon Horman
2019-06-21 9:16 ` [PATCH 30/53] arm64: dts: renesas: hihope-common: Add pincontrol support to scif2/scif clock Simon Horman
2019-06-21 9:16 ` [PATCH 31/53] arm64: dts: renesas: Add HiHope RZ/G2M sub board support Simon Horman
2019-06-21 9:16 ` [PATCH 32/53] arm64: dts: renesas: r8a774a1: Add PCIe device nodes Simon Horman
2019-06-21 9:16 ` [PATCH 33/53] arm64: dts: renesas: hihope-common: Declare pcie bus clock Simon Horman
2019-06-21 9:16 ` [PATCH 34/53] arm64: dts: renesas: hihope-rzg2-ex: Enable PCIe support Simon Horman
2019-06-21 9:16 ` [PATCH 35/53] arm64: dts: renesas: hihope-common: Add RWDT support Simon Horman
2019-06-21 9:16 ` [PATCH 36/53] arm64: dts: renesas: r8a7799[05]: Point LVDS0 to its companion LVDS1 Simon Horman
2019-06-21 9:16 ` [PATCH 37/53] arm64: dts: renesas: cat874: Enable USB3.0 host/peripheral device node Simon Horman
2019-06-21 9:16 ` [PATCH 38/53] arm64: dts: renesas: cat874: Enable usb role switch support Simon Horman
2019-06-21 9:16 ` [PATCH 39/53] arm64: dts: renesas: r8a77990: Fix register range of display node Simon Horman
2019-06-21 9:16 ` [PATCH 40/53] arm64: dts: renesas: hihope-common: Add uSD and eMMC Simon Horman
2019-06-21 9:16 ` [PATCH 41/53] arm64: dts: renesas: r8a774a1: Add CMT device nodes Simon Horman
2019-06-21 9:16 ` [PATCH 42/53] arm64: dts: renesas: r8a774a1: Add TMU " Simon Horman
2019-06-21 9:16 ` [PATCH 43/53] arm64: dts: renesas: r8a774a1: Fix USB 2.0 clocks Simon Horman
2019-06-21 9:16 ` [PATCH 44/53] arm64: dts: renesas: hihope-common: Add USB 2.0 support Simon Horman
2019-06-21 9:16 ` [PATCH 45/53] arm64: dts: renesas: hihope-common: Enable USB3.0 Simon Horman
2019-06-21 9:16 ` [PATCH 46/53] arm64: dts: renesas: hihope-common: Add LEDs support Simon Horman
2019-06-21 9:16 ` [PATCH 47/53] arm64: dts: renesas: r8a774a1: Add CPU topology on r8a774a1 SoC Simon Horman
2019-06-21 9:16 ` [PATCH 48/53] arm64: dts: renesas: r8a774a1: Add CPU capacity-dmips-mhz Simon Horman
2019-06-21 9:16 ` [PATCH 49/53] arm64: dts: renesas: r8a774a1: Create thermal zone to support IPA Simon Horman
2019-06-21 9:16 ` [PATCH 50/53] arm64: dts: renesas: r8a774a1: Add dynamic power coefficient Simon Horman
2019-06-21 9:16 ` Simon Horman [this message]
2019-06-21 9:16 ` [PATCH 52/53] arm64: dts: renesas: hihope-common: Add HDMI support Simon Horman
2019-06-21 9:16 ` [PATCH 53/53] arm64: dts: renesas: hihope-common: Remove "label" from LEDs Simon Horman
2019-06-25 11:46 ` [GIT PULL] Renesas ARM64 Based SoC DT Updates for v5.3 Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8c965642354950cd17d1edff57fd5ca965040517.1561107232.git.horms+renesas@verge.net.au \
--to=horms+renesas@verge.net.au \
--cc=fabrizio.castro@bp.renesas.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).