From: Alexandru Elisei <alexandru.elisei@arm.com>
To: Marc Zyngier <maz@kernel.org>,
linux-arm-kernel@lists.infradead.org, kvm@vger.kernel.org,
kvmarm@lists.cs.columbia.edu
Cc: James Morse <james.morse@arm.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Eric Auger <eric.auger@redhat.com>,
Hector Martin <marcan@marcan.st>,
Mark Rutland <mark.rutland@arm.com>,
Zenghui Yu <yuzenghui@huawei.com>,
kernel-team@android.com
Subject: Re: [PATCH v4 0/9] KVM: arm64: Initial host support for the Apple M1
Date: Tue, 22 Jun 2021 16:39:11 +0100 [thread overview]
Message-ID: <9bc0923c-5c3b-eeac-86ee-c3234c486955@arm.com> (raw)
In-Reply-To: <20210601104005.81332-1-maz@kernel.org>
Hi Marc,
On 6/1/21 11:39 AM, Marc Zyngier wrote:
> This is a new version of the series previously posted at [3], reworking
> the vGIC and timer code to cope with the M1 braindead^Wamusing nature.
>
> Hardly any change this time around, mostly rebased on top of upstream
> now that the dependencies have made it in.
>
> Tested with multiple concurrent VMs running from an initramfs.
>
> Until someone shouts loudly now, I'll take this into 5.14 (and in
> -next from tomorrow).
I am not familiar with irqdomains or with the irqchip infrastructure, so I can't
really comment on patch #8.
I tried testing this with a GICv3 by modifying the driver to set
no_hw_deactivation and no_maint_irq_mask:
diff --git a/arch/arm64/kvm/vgic/vgic-init.c b/arch/arm64/kvm/vgic/vgic-init.c
index 340c51d87677..d0c6f808d7f4 100644
--- a/arch/arm64/kvm/vgic/vgic-init.c
+++ b/arch/arm64/kvm/vgic/vgic-init.c
@@ -565,8 +565,10 @@ int kvm_vgic_hyp_init(void)
if (ret)
return ret;
+ /*
if (!has_mask)
return 0;
+ */
ret = request_percpu_irq(kvm_vgic_global_state.maint_irq,
vgic_maintenance_handler,
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 453fc425eede..9ce4dee20655 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -1850,6 +1850,12 @@ static void __init gic_of_setup_kvm_info(struct device_node
*node)
if (!ret)
gic_v3_kvm_info.vcpu = r;
+ gic_v3_kvm_info.no_hw_deactivation = true;
+ gic_v3_kvm_info.no_maint_irq_mask = true;
+
+ vgic_set_kvm_info(&gic_v3_kvm_info);
+ return;
+
gic_v3_kvm_info.has_v4 = gic_data.rdists.has_vlpis;
gic_v3_kvm_info.has_v4_1 = gic_data.rdists.has_rvpeid;
vgic_set_kvm_info(&gic_v3_kvm_info);
Kept the maintenance irq ID so the IRQ gets enabled at the Redistributor level. I
don't know if I managed to break something with those changes, but when testing on
the model and on a rockpro64 (with the patches cherry-picked on top of v5.13-rc7)
I kept seeing rcu stalls. I assume I did something wrong.
Thanks,
Alex
>
> * From v3 [3]:
> - Rebased on 5.13-rc4 to match the kvmarm/next base
> - Moved stuff from patch #7 to its logical spot in patch #8
> - Changed the include/linux/irqchip/arm-vgic-info.h guard
> - Collected RBs from Alex, with thanks
>
> * From v2 [2]:
> - Rebased on 5.13-rc1
> - Fixed a couple of nits in the GIC registration code
>
> * From v1 [1]:
> - Rebased on Hector's v4 posting[0]
> - Dropped a couple of patches that have been merged in the above series
> - Fixed irq_ack callback on the timer path
>
> [0] https://lore.kernel.org/r/20210402090542.131194-1-marcan@marcan.st
> [1] https://lore.kernel.org/r/20210316174617.173033-1-maz@kernel.org
> [2] https://lore.kernel.org/r/20210403112931.1043452-1-maz@kernel.org
> [3] https://lore.kernel.org/r/20210510134824.1910399-1-maz@kernel.org
>
> Marc Zyngier (9):
> irqchip/gic: Split vGIC probing information from the GIC code
> KVM: arm64: Handle physical FIQ as an IRQ while running a guest
> KVM: arm64: vgic: Be tolerant to the lack of maintenance interrupt
> masking
> KVM: arm64: vgic: Let an interrupt controller advertise lack of HW
> deactivation
> KVM: arm64: vgic: move irq->get_input_level into an ops structure
> KVM: arm64: vgic: Implement SW-driven deactivation
> KVM: arm64: timer: Refactor IRQ configuration
> KVM: arm64: timer: Add support for SW-based deactivation
> irqchip/apple-aic: Advertise some level of vGICv3 compatibility
>
> arch/arm64/kvm/arch_timer.c | 162 +++++++++++++++++++++----
> arch/arm64/kvm/hyp/hyp-entry.S | 6 +-
> arch/arm64/kvm/vgic/vgic-init.c | 36 +++++-
> arch/arm64/kvm/vgic/vgic-v2.c | 19 ++-
> arch/arm64/kvm/vgic/vgic-v3.c | 19 ++-
> arch/arm64/kvm/vgic/vgic.c | 14 +--
> drivers/irqchip/irq-apple-aic.c | 9 ++
> drivers/irqchip/irq-gic-common.c | 13 --
> drivers/irqchip/irq-gic-common.h | 2 -
> drivers/irqchip/irq-gic-v3.c | 6 +-
> drivers/irqchip/irq-gic.c | 6 +-
> include/kvm/arm_vgic.h | 41 +++++--
> include/linux/irqchip/arm-gic-common.h | 25 +---
> include/linux/irqchip/arm-vgic-info.h | 45 +++++++
> 14 files changed, 299 insertions(+), 104 deletions(-)
> create mode 100644 include/linux/irqchip/arm-vgic-info.h
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-06-22 15:40 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-01 10:39 [PATCH v4 0/9] KVM: arm64: Initial host support for the Apple M1 Marc Zyngier
2021-06-01 10:39 ` [PATCH v4 1/9] irqchip/gic: Split vGIC probing information from the GIC code Marc Zyngier
2021-06-01 10:39 ` [PATCH v4 2/9] KVM: arm64: Handle physical FIQ as an IRQ while running a guest Marc Zyngier
2021-06-01 10:39 ` [PATCH v4 3/9] KVM: arm64: vgic: Be tolerant to the lack of maintenance interrupt masking Marc Zyngier
2021-06-11 16:38 ` Alexandru Elisei
2021-06-11 16:59 ` Alexandru Elisei
2021-06-01 10:40 ` [PATCH v4 4/9] KVM: arm64: vgic: Let an interrupt controller advertise lack of HW deactivation Marc Zyngier
2021-06-15 14:26 ` Alexandru Elisei
2021-06-22 16:19 ` Marc Zyngier
2021-06-01 10:40 ` [PATCH v4 5/9] KVM: arm64: vgic: move irq->get_input_level into an ops structure Marc Zyngier
2021-06-15 14:45 ` Alexandru Elisei
2021-06-22 15:55 ` Marc Zyngier
2021-06-01 10:40 ` [PATCH v4 6/9] KVM: arm64: vgic: Implement SW-driven deactivation Marc Zyngier
2021-06-17 14:58 ` Alexandru Elisei
2021-06-22 16:12 ` Marc Zyngier
2021-06-23 14:15 ` Alexandru Elisei
2021-06-01 10:40 ` [PATCH v4 7/9] KVM: arm64: timer: Refactor IRQ configuration Marc Zyngier
2021-06-21 16:19 ` Alexandru Elisei
2021-06-01 10:40 ` [PATCH v4 8/9] KVM: arm64: timer: Add support for SW-based deactivation Marc Zyngier
2021-06-01 10:40 ` [PATCH v4 9/9] irqchip/apple-aic: Advertise some level of vGICv3 compatibility Marc Zyngier
2021-06-22 15:39 ` Alexandru Elisei [this message]
2021-06-22 15:51 ` [PATCH v4 0/9] KVM: arm64: Initial host support for the Apple M1 Marc Zyngier
2021-06-22 16:03 ` Alexandru Elisei
2021-06-22 16:26 ` Marc Zyngier
2021-06-23 16:18 ` Alexandru Elisei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9bc0923c-5c3b-eeac-86ee-c3234c486955@arm.com \
--to=alexandru.elisei@arm.com \
--cc=eric.auger@redhat.com \
--cc=james.morse@arm.com \
--cc=kernel-team@android.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=marcan@marcan.st \
--cc=mark.rutland@arm.com \
--cc=maz@kernel.org \
--cc=suzuki.poulose@arm.com \
--cc=yuzenghui@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).