From mboxrd@z Thu Jan 1 00:00:00 1970 From: viresh.kumar@st.com (Viresh Kumar) Date: Fri, 29 Jul 2011 16:19:19 +0530 Subject: [PATCH 09/18] dmaengine/amba-pl08x: Schedule tasklet in case of error interrupt In-Reply-To: References: Message-ID: <9c81beb9cd84f84b58abbd24ebfae85dfe8d8ee1.1311936524.git.viresh.kumar@st.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Currently, if error interrupt occurs, nothing is done in interrupt handler (just clearing the interrupts). We must somehow indicate this to the user that DMA is over, due to ERR interrupt or TC interrupt. So, this patch just schedules existing tasklet, with a print showing error interrupt has occured on which channels. Signed-off-by: Viresh Kumar --- drivers/dma/amba-pl08x.c | 43 ++++++++++++++++++------------------------- 1 files changed, 18 insertions(+), 25 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index c4ce1a2..b9137bc 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1630,40 +1630,33 @@ static void pl08x_tasklet(unsigned long data) static irqreturn_t pl08x_irq(int irq, void *dev) { struct pl08x_driver_data *pl08x = dev; - u32 mask = 0; - u32 val; - int i; - - val = readl(pl08x->base + PL080_ERR_STATUS); - if (val) { - /* An error interrupt (on one or more channels) */ - dev_err(&pl08x->adev->dev, - "%s error interrupt, register value 0x%08x\n", - __func__, val); - /* - * Simply clear ALL PL08X error interrupts, - * regardless of channel and cause - * FIXME: should be 0x00000003 on PL081 really. - */ - writel(0x000000FF, pl08x->base + PL080_ERR_CLEAR); + u32 err, tc, i; + + /* check & clear - ERR & TC interrupts */ + err = readl(pl08x->base + PL080_ERR_STATUS); + if (err) { + dev_err(&pl08x->adev->dev, "%s error interrupt, register value" + "0x%08x\n", __func__, err); + writel(err, pl08x->base + PL080_ERR_CLEAR); } - val = readl(pl08x->base + PL080_INT_STATUS); - for (i = 0; i < pl08x->vd->channels; i++) { - if ((1 << i) & val) { + tc = readl(pl08x->base + PL080_INT_STATUS); + if (tc) + writel(tc, pl08x->base + PL080_TC_CLEAR); + + if (!err && !tc) + return IRQ_NONE; + + for (i = 0; i < pl08x->vd->channels; i++) + if (((1 << i) & err) || ((1 << i) & tc)) { /* Locate physical channel */ struct pl08x_phy_chan *phychan = &pl08x->phy_chans[i]; struct pl08x_dma_chan *plchan = phychan->serving; /* Schedule tasklet on this channel */ tasklet_schedule(&plchan->tasklet); - - mask |= (1 << i); } - } - /* Clear only the terminal interrupts on channels we processed */ - writel(mask, pl08x->base + PL080_TC_CLEAR); - return mask ? IRQ_HANDLED : IRQ_NONE; + return IRQ_HANDLED; } static void pl08x_dma_slave_init(struct pl08x_dma_chan *chan) -- 1.7.2.2