linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Vidya Sagar <vidyas@nvidia.com>, <lorenzo.pieralisi@arm.com>,
	<bhelgaas@google.com>, <robh+dt@kernel.org>,
	<mark.rutland@arm.com>, <thierry.reding@gmail.com>,
	<jonathanh@nvidia.com>, <catalin.marinas@arm.com>,
	<will.deacon@arm.com>, <jingoohan1@gmail.com>,
	<gustavo.pimentel@synopsys.com>
Cc: devicetree@vger.kernel.org, mmaddireddy@nvidia.com,
	kthota@nvidia.com, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org, mperttunen@nvidia.com,
	linux-tegra@vger.kernel.org, digetx@gmail.com,
	linux-arm-kernel@lists.infradead.org, sagar.tv@gmail.com
Subject: Re: [PATCH V10 13/15] phy: tegra: Add PCIe PIPE2UPHY support
Date: Thu, 20 Jun 2019 12:54:33 +0530	[thread overview]
Message-ID: <9e699085-ef5e-f7be-e27c-23907ba92c82@ti.com> (raw)
In-Reply-To: <20190612095339.20118-14-vidyas@nvidia.com>



On 12/06/19 3:23 PM, Vidya Sagar wrote:
> Synopsys DesignWare core based PCIe controllers in Tegra 194 SoC interface
> with Universal PHY (UPHY) module through a PIPE2UPHY (P2U) module.
> For each PCIe lane of a controller, there is a P2U unit instantiated at
> hardware level. This driver provides support for the programming required
> for each P2U that is going to be used for a PCIe controller.

One minor comment below. With that fixed

Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
> 
> Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
> ---
> Changes since [v9]:
> * Used _relaxed() versions of readl() & writel()
> 
> Changes since [v8]:
> * Made it dependent on ARCH_TEGRA_194_SOC directly instead of ARCH_TEGRA
> 
> Changes since [v7]:
> * Changed P2U driver file name from pcie-p2u-tegra194.c to phy-tegra194-p2u.c
> 
> Changes since [v6]:
> * None
> 
> Changes since [v5]:
> * Addressed review comments from Thierry
> 
> Changes since [v4]:
> * None
> 
> Changes since [v3]:
> * Rebased on top of linux-next top of the tree
> 
> Changes since [v2]:
> * Replaced spaces with tabs in Kconfig file
> * Sorted header file inclusion alphabetically
> 
> Changes since [v1]:
> * Added COMPILE_TEST in Kconfig
> * Removed empty phy_ops implementations
> * Modified code according to DT documentation file modifications
> 
>  drivers/phy/tegra/Kconfig            |   7 ++
>  drivers/phy/tegra/Makefile           |   1 +
>  drivers/phy/tegra/phy-tegra194-p2u.c | 120 +++++++++++++++++++++++++++
>  3 files changed, 128 insertions(+)
>  create mode 100644 drivers/phy/tegra/phy-tegra194-p2u.c
> 
> diff --git a/drivers/phy/tegra/Kconfig b/drivers/phy/tegra/Kconfig
> index e516967d695b..f9817c3ae85f 100644
> --- a/drivers/phy/tegra/Kconfig
> +++ b/drivers/phy/tegra/Kconfig
> @@ -7,3 +7,10 @@ config PHY_TEGRA_XUSB
>  
>  	  To compile this driver as a module, choose M here: the module will
>  	  be called phy-tegra-xusb.
> +
> +config PHY_TEGRA194_P2U
> +	tristate "NVIDIA Tegra194 PIPE2UPHY PHY driver"
> +	depends on ARCH_TEGRA_194_SOC || COMPILE_TEST
> +	select GENERIC_PHY
> +	help
> +	  Enable this to support the P2U (PIPE to UPHY) that is part of Tegra 19x SOCs.
> diff --git a/drivers/phy/tegra/Makefile b/drivers/phy/tegra/Makefile
> index 64ccaeacb631..320dd389f34d 100644
> --- a/drivers/phy/tegra/Makefile
> +++ b/drivers/phy/tegra/Makefile
> @@ -6,3 +6,4 @@ phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_124_SOC) += xusb-tegra124.o
>  phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_132_SOC) += xusb-tegra124.o
>  phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_210_SOC) += xusb-tegra210.o
>  phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_186_SOC) += xusb-tegra186.o
> +obj-$(CONFIG_PHY_TEGRA194_P2U) += phy-tegra194-p2u.o
> diff --git a/drivers/phy/tegra/phy-tegra194-p2u.c b/drivers/phy/tegra/phy-tegra194-p2u.c
> new file mode 100644
> index 000000000000..df009abd2482
> --- /dev/null
> +++ b/drivers/phy/tegra/phy-tegra194-p2u.c
> @@ -0,0 +1,120 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * P2U (PIPE to UPHY) driver for Tegra T194 SoC
> + *
> + * Copyright (C) 2019 NVIDIA Corporation.
> + *
> + * Author: Vidya Sagar <vidyas@nvidia.com>
> + */
> +
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/phy/phy.h>
> +
> +#define P2U_PERIODIC_EQ_CTRL_GEN3	0xc0
> +#define P2U_PERIODIC_EQ_CTRL_GEN3_PERIODIC_EQ_EN		BIT(0)
> +#define P2U_PERIODIC_EQ_CTRL_GEN3_INIT_PRESET_EQ_TRAIN_EN	BIT(1)
> +#define P2U_PERIODIC_EQ_CTRL_GEN4	0xc4
> +#define P2U_PERIODIC_EQ_CTRL_GEN4_INIT_PRESET_EQ_TRAIN_EN	BIT(1)
> +
> +#define P2U_RX_DEBOUNCE_TIME				0xa4
> +#define P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_MASK	0xffff
> +#define P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_VAL		160
> +
> +struct tegra_p2u {
> +	void __iomem *base;
> +};
> +
> +static inline void p2u_writel(struct tegra_p2u *phy, const u32 value,
> +			      const u32 reg)
> +{
> +	writel_relaxed(value, phy->base + reg);
> +}
> +
> +static inline u32 p2u_readl(struct tegra_p2u *phy, const u32 reg)
> +{
> +	return readl_relaxed(phy->base + reg);
> +}
> +
> +static int tegra_p2u_power_on(struct phy *x)
> +{
> +	struct tegra_p2u *phy = phy_get_drvdata(x);
> +	u32 val;
> +
> +	val = p2u_readl(phy, P2U_PERIODIC_EQ_CTRL_GEN3);
> +	val &= ~P2U_PERIODIC_EQ_CTRL_GEN3_PERIODIC_EQ_EN;
> +	val |= P2U_PERIODIC_EQ_CTRL_GEN3_INIT_PRESET_EQ_TRAIN_EN;
> +	p2u_writel(phy, val, P2U_PERIODIC_EQ_CTRL_GEN3);
> +
> +	val = p2u_readl(phy, P2U_PERIODIC_EQ_CTRL_GEN4);
> +	val |= P2U_PERIODIC_EQ_CTRL_GEN4_INIT_PRESET_EQ_TRAIN_EN;
> +	p2u_writel(phy, val, P2U_PERIODIC_EQ_CTRL_GEN4);
> +
> +	val = p2u_readl(phy, P2U_RX_DEBOUNCE_TIME);
> +	val &= ~P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_MASK;
> +	val |= P2U_RX_DEBOUNCE_TIME_DEBOUNCE_TIMER_VAL;
> +	p2u_writel(phy, val, P2U_RX_DEBOUNCE_TIME);
> +
> +	return 0;
> +}
> +
> +static const struct phy_ops ops = {
> +	.power_on = tegra_p2u_power_on,
> +	.owner = THIS_MODULE,
> +};
> +
> +static int tegra_p2u_probe(struct platform_device *pdev)
> +{
> +	struct phy_provider *phy_provider;
> +	struct device *dev = &pdev->dev;
> +	struct phy *generic_phy;
> +	struct tegra_p2u *phy;
> +	struct resource *res;
> +
> +	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
> +	if (!phy)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctl");
> +	phy->base = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(phy->base))
> +		return PTR_ERR_OR_ZERO(phy->base);
> +
> +	platform_set_drvdata(pdev, phy);
> +
> +	generic_phy = devm_phy_create(dev, NULL, &ops);
> +	if (IS_ERR(generic_phy))
> +		return PTR_ERR_OR_ZERO(generic_phy);
> +
> +	phy_set_drvdata(generic_phy, phy);
> +
> +	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +	if (IS_ERR(phy_provider))
> +		return PTR_ERR_OR_ZERO(phy_provider);
> +
> +	return 0;

Just make this..
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);

Thanks
Kishon

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-06-20  7:26 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-12  9:53 [PATCH V10 00/15] Add Tegra194 PCIe support Vidya Sagar
2019-06-12  9:53 ` [PATCH V10 01/15] PCI: Add #defines for some of PCIe spec r4.0 features Vidya Sagar
2019-06-12  9:53 ` [PATCH V10 02/15] PCI: Disable MSI for Tegra194 root port Vidya Sagar
2019-06-12  9:53 ` [PATCH V10 03/15] PCI: dwc: Perform dbi regs write lock towards the end Vidya Sagar
2019-06-18  6:34   ` Jingoo Han
2019-06-12  9:53 ` [PATCH V10 04/15] PCI: dwc: Move config space capability search API Vidya Sagar
2019-06-12  9:53 ` [PATCH V10 05/15] PCI: dwc: Add ext " Vidya Sagar
2019-06-12  9:53 ` [PATCH V10 06/15] dt-bindings: PCI: designware: Add binding for CDM register check Vidya Sagar
2019-06-12  9:53 ` [PATCH V10 07/15] PCI: dwc: Add support to enable " Vidya Sagar
2019-06-12  9:53 ` [PATCH V10 08/15] dt-bindings: Add PCIe supports-clkreq property Vidya Sagar
2019-06-12  9:53 ` [PATCH V10 09/15] dt-bindings: PCI: tegra: Add device tree support for Tegra194 Vidya Sagar
2019-06-12  9:53 ` [PATCH V10 10/15] dt-bindings: PHY: P2U: Add Tegra194 P2U block Vidya Sagar
2019-06-20  7:22   ` Kishon Vijay Abraham I
2019-06-12  9:53 ` [PATCH V10 11/15] arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT Vidya Sagar
2019-06-20 10:55   ` Thierry Reding
2019-06-24  7:32     ` Vidya Sagar
2019-06-25  7:33       ` Thierry Reding
2019-06-12  9:53 ` [PATCH V10 12/15] arm64: tegra: Enable PCIe slots in P2972-0000 board Vidya Sagar
2019-06-20 11:01   ` Thierry Reding
2019-06-12  9:53 ` [PATCH V10 13/15] phy: tegra: Add PCIe PIPE2UPHY support Vidya Sagar
2019-06-20  7:24   ` Kishon Vijay Abraham I [this message]
2019-06-20 23:23     ` Dmitry Osipenko
2019-06-22 17:56       ` Vidya Sagar
2019-06-12  9:53 ` [PATCH V10 14/15] PCI: tegra: Add Tegra194 PCIe support Vidya Sagar
2019-06-12  9:53 ` [PATCH V10 15/15] arm64: Add Tegra194 PCIe driver to defconfig Vidya Sagar
2019-06-20 11:03   ` Thierry Reding

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9e699085-ef5e-f7be-e27c-23907ba92c82@ti.com \
    --to=kishon@ti.com \
    --cc=bhelgaas@google.com \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=digetx@gmail.com \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=jingoohan1@gmail.com \
    --cc=jonathanh@nvidia.com \
    --cc=kthota@nvidia.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=mmaddireddy@nvidia.com \
    --cc=mperttunen@nvidia.com \
    --cc=robh+dt@kernel.org \
    --cc=sagar.tv@gmail.com \
    --cc=thierry.reding@gmail.com \
    --cc=vidyas@nvidia.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).