From: Aisheng Dong <aisheng.dong@nxp.com>
To: Andrey Smirnov <andrew.smirnov@gmail.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: "linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
Rob Herring <robh@kernel.org>, Richard Zhu <hongxing.zhu@nxp.com>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
dl-linux-imx <linux-imx@nxp.com>,
"p.zabel@pengutronix.de" <p.zabel@pengutronix.de>,
Fabio Estevam <fabio.estevam@nxp.com>,
Leonard Crestez <leonard.crestez@nxp.com>,
"cphealy@gmail.com" <cphealy@gmail.com>,
"l.stach@pengutronix.de" <l.stach@pengutronix.de>
Subject: RE: [PATCH v3 3/3] reset: imx7: Add support for i.MX8MQ IP block variant
Date: Mon, 17 Dec 2018 04:30:26 +0000 [thread overview]
Message-ID: <AM0PR04MB42114239FC75F5514554B55280BC0@AM0PR04MB4211.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <20181217023827.7947-4-andrew.smirnov@gmail.com>
> -----Original Message-----
> From: Andrey Smirnov [mailto:andrew.smirnov@gmail.com]
> Sent: Monday, December 17, 2018 10:38 AM
> To: linux-kernel@vger.kernel.org
> Cc: Andrey Smirnov <andrew.smirnov@gmail.com>; p.zabel@pengutronix.de;
> Fabio Estevam <fabio.estevam@nxp.com>; cphealy@gmail.com;
> l.stach@pengutronix.de; Leonard Crestez <leonard.crestez@nxp.com>; Aisheng
> Dong <aisheng.dong@nxp.com>; Richard Zhu <hongxing.zhu@nxp.com>; Rob
> Herring <robh@kernel.org>; devicetree@vger.kernel.org; dl-linux-imx
> <linux-imx@nxp.com>; linux-arm-kernel@lists.infradead.org
> Subject: [PATCH v3 3/3] reset: imx7: Add support for i.MX8MQ IP block variant
>
> Add bits and pieces needed to support IP block variant found on i.MX8MQ
> SoCs.
>
> Cc: p.zabel@pengutronix.de
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Cc: cphealy@gmail.com
> Cc: l.stach@pengutronix.de
> Cc: Leonard Crestez <leonard.crestez@nxp.com>
> Cc: "A.s. Dong" <aisheng.dong@nxp.com>
> Cc: Richard Zhu <hongxing.zhu@nxp.com>
> Cc: Rob Herring <robh@kernel.org>
> Cc: devicetree@vger.kernel.org
> Cc: linux-imx@nxp.com
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> ---
> drivers/reset/Kconfig | 2 +-
> drivers/reset/reset-imx7.c | 106
> +++++++++++++++++++++++++++++++++++++
> 2 files changed, 107 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index
> c21da9fe51ec..4909aab7401b 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -50,7 +50,7 @@ config RESET_HSDK
> config RESET_IMX7
> bool "i.MX7 Reset Driver" if COMPILE_TEST
> depends on HAS_IOMEM
> - default SOC_IMX7D
> + default SOC_IMX7D || SOC_IMX8MQ
SOC_IMX8MQ has been removed in Shawn's tree.
I'd suggest simply using ARCH_MXC.
Regards
Dong Aisheng
> select MFD_SYSCON
> help
> This enables the reset controller driver for i.MX7 SoCs.
> diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c index
> 3a36d5863891..bb826935db6d 100644
> --- a/drivers/reset/reset-imx7.c
> +++ b/drivers/reset/reset-imx7.c
> @@ -22,6 +22,7 @@
> #include <linux/reset-controller.h>
> #include <linux/regmap.h>
> #include <dt-bindings/reset/imx7-reset.h>
> +#include <dt-bindings/reset/imx8mq-reset.h>
>
> struct imx7_src_signal {
> unsigned int offset, bit;
> @@ -113,6 +114,110 @@ static const struct imx7_src_variant variant_imx7 =
> {
> .prepare = imx7_src_prepare,
> };
>
> +enum imx8mq_src_registers {
> + SRC_A53RCR0 = 0x0004,
> + SRC_HDMI_RCR = 0x0030,
> + SRC_DISP_RCR = 0x0034,
> + SRC_GPU_RCR = 0x0040,
> + SRC_VPU_RCR = 0x0044,
> + SRC_PCIE2_RCR = 0x0048,
> + SRC_MIPIPHY1_RCR = 0x004c,
> + SRC_MIPIPHY2_RCR = 0x0050,
> + SRC_DDRC2_RCR = 0x1004,
> +};
> +
> +static const struct imx7_src_signal
> imx8mq_src_signals[IMX8MQ_RESET_NUM] = {
> + [IMX8MQ_RESET_A53_CORE_POR_RESET0] = { SRC_A53RCR0, BIT(0) },
> + [IMX8MQ_RESET_A53_CORE_POR_RESET1] = { SRC_A53RCR0, BIT(1) },
> + [IMX8MQ_RESET_A53_CORE_POR_RESET2] = { SRC_A53RCR0, BIT(2) },
> + [IMX8MQ_RESET_A53_CORE_POR_RESET3] = { SRC_A53RCR0, BIT(3) },
> + [IMX8MQ_RESET_A53_CORE_RESET0] = { SRC_A53RCR0, BIT(4) },
> + [IMX8MQ_RESET_A53_CORE_RESET1] = { SRC_A53RCR0, BIT(5) },
> + [IMX8MQ_RESET_A53_CORE_RESET2] = { SRC_A53RCR0, BIT(6) },
> + [IMX8MQ_RESET_A53_CORE_RESET3] = { SRC_A53RCR0, BIT(7) },
> + [IMX8MQ_RESET_A53_DBG_RESET0] = { SRC_A53RCR0, BIT(8) },
> + [IMX8MQ_RESET_A53_DBG_RESET1] = { SRC_A53RCR0, BIT(9) },
> + [IMX8MQ_RESET_A53_DBG_RESET2] = { SRC_A53RCR0, BIT(10) },
> + [IMX8MQ_RESET_A53_DBG_RESET3] = { SRC_A53RCR0, BIT(11) },
> + [IMX8MQ_RESET_A53_ETM_RESET0] = { SRC_A53RCR0, BIT(12) },
> + [IMX8MQ_RESET_A53_ETM_RESET1] = { SRC_A53RCR0, BIT(13) },
> + [IMX8MQ_RESET_A53_ETM_RESET2] = { SRC_A53RCR0, BIT(14) },
> + [IMX8MQ_RESET_A53_ETM_RESET3] = { SRC_A53RCR0, BIT(15) },
> + [IMX8MQ_RESET_A53_SOC_DBG_RESET] = { SRC_A53RCR0, BIT(20) },
> + [IMX8MQ_RESET_A53_L2RESET] = { SRC_A53RCR0, BIT(21) },
> + [IMX8MQ_RESET_SW_NON_SCLR_M4C_RST] = { SRC_M4RCR, BIT(0) },
> + [IMX8MQ_RESET_OTG1_PHY_RESET] = { SRC_USBOPHY1_RCR,
> BIT(0) },
> + [IMX8MQ_RESET_OTG2_PHY_RESET] = { SRC_USBOPHY2_RCR,
> BIT(0) },
> + [IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N] = { SRC_MIPIPHY_RCR,
> BIT(1) },
> + [IMX8MQ_RESET_MIPI_DSI_RESET_N] = { SRC_MIPIPHY_RCR,
> BIT(2) },
> + [IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N] = { SRC_MIPIPHY_RCR,
> BIT(3) },
> + [IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N] = { SRC_MIPIPHY_RCR,
> BIT(4) },
> + [IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N] = { SRC_MIPIPHY_RCR,
> BIT(5) },
> + [IMX8MQ_RESET_PCIEPHY] = { SRC_PCIEPHY_RCR,
> + BIT(2) | BIT(1) },
> + [IMX8MQ_RESET_PCIEPHY_PERST] = { SRC_PCIEPHY_RCR,
> BIT(3) },
> + [IMX8MQ_RESET_PCIE_CTRL_APPS_EN] = { SRC_PCIEPHY_RCR,
> BIT(6) },
> + [IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF] = { SRC_PCIEPHY_RCR,
> BIT(11) },
> + [IMX8MQ_RESET_HDMI_PHY_APB_RESET] = { SRC_HDMI_RCR, BIT(0) },
> + [IMX8MQ_RESET_DISP_RESET] = { SRC_DISP_RCR, BIT(0) },
> + [IMX8MQ_RESET_GPU_RESET] = { SRC_GPU_RCR, BIT(0) },
> + [IMX8MQ_RESET_VPU_RESET] = { SRC_VPU_RCR, BIT(0) },
> + [IMX8MQ_RESET_PCIEPHY2] = { SRC_PCIE2_RCR,
> + BIT(2) | BIT(1) },
> + [IMX8MQ_RESET_PCIEPHY2_PERST] = { SRC_PCIE2_RCR, BIT(3) },
> + [IMX8MQ_RESET_PCIE2_CTRL_APPS_EN] = { SRC_PCIE2_RCR, BIT(6) },
> + [IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF] = { SRC_PCIE2_RCR,
> BIT(11) },
> + [IMX8MQ_RESET_MIPI_CSI1_CORE_RESET] = { SRC_MIPIPHY1_RCR,
> BIT(0) },
> + [IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET] = { SRC_MIPIPHY1_RCR,
> BIT(1) },
> + [IMX8MQ_RESET_MIPI_CSI1_ESC_RESET] = { SRC_MIPIPHY1_RCR,
> BIT(2) },
> + [IMX8MQ_RESET_MIPI_CSI2_CORE_RESET] = { SRC_MIPIPHY2_RCR,
> BIT(0) },
> + [IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET] = { SRC_MIPIPHY2_RCR,
> BIT(1) },
> + [IMX8MQ_RESET_MIPI_CSI2_ESC_RESET] = { SRC_MIPIPHY2_RCR,
> BIT(2) },
> + [IMX8MQ_RESET_DDRC1_PRST] = { SRC_DDRC_RCR, BIT(0) },
> + [IMX8MQ_RESET_DDRC1_CORE_RESET] = { SRC_DDRC_RCR,
> BIT(1) },
> + [IMX8MQ_RESET_DDRC1_PHY_RESET] = { SRC_DDRC_RCR, BIT(2) },
> + [IMX8MQ_RESET_DDRC2_PHY_RESET] = { SRC_DDRC2_RCR, BIT(0) },
> + [IMX8MQ_RESET_DDRC2_CORE_RESET] = { SRC_DDRC2_RCR,
> BIT(1) },
> + [IMX8MQ_RESET_DDRC2_PRST] = { SRC_DDRC2_RCR, BIT(2) },
> +};
> +
> +static unsigned int
> +imx8mq_src_prepare(struct imx7_src *imx7src, unsigned long id, bool
> +assert) {
> + const unsigned int bit = imx7src->variant->signals[id].bit;
> + unsigned int value = assert ? bit : 0;
> +
> + switch (id) {
> + case IMX8MQ_RESET_PCIEPHY:
> + case IMX8MQ_RESET_PCIEPHY2: /* fallthrough */
> + /*
> + * wait for more than 10us to release phy g_rst and
> + * btnrst
> + */
> + if (!assert)
> + udelay(10);
> + break;
> +
> + case IMX8MQ_RESET_PCIE_CTRL_APPS_EN:
> + case IMX8MQ_RESET_PCIE2_CTRL_APPS_EN: /* fallthrough */
> + case IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N: /* fallthrough */
> + case IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N: /* fallthrough */
> + case IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N: /* fallthrough */
> + case IMX8MQ_RESET_MIPI_DSI_RESET_N: /* fallthrough */
> + case IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N: /* fallthrough */
> + value = assert ? 0 : bit;
> + break;
> + }
> +
> + return value;
> +}
> +
> +static const struct imx7_src_variant variant_imx8mq = {
> + .signals = imx8mq_src_signals,
> + .signals_num = ARRAY_SIZE(imx8mq_src_signals),
> + .prepare = imx8mq_src_prepare,
> +};
> +
> static struct imx7_src *to_imx7_src(struct reset_controller_dev *rcdev) {
> return container_of(rcdev, struct imx7_src, rcdev); @@ -175,6 +280,7
> @@ static int imx7_reset_probe(struct platform_device *pdev)
>
> static const struct of_device_id imx7_reset_dt_ids[] = {
> { .compatible = "fsl,imx7d-src", .data = &variant_imx7 },
> + { .compatible = "fsl,imx8mq-src", .data = &variant_imx8mq },
> { /* sentinel */ },
> };
>
> --
> 2.19.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2018-12-17 4:30 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-17 2:38 [PATCH v3 0/3] Reset controller support for i.MX8MQ Andrey Smirnov
2018-12-17 2:38 ` [PATCH v3 1/3] reset: imx7: Add plubming to support multiple IP variants Andrey Smirnov
2018-12-17 2:38 ` [PATCH v3 2/3] dt-bindings: reset: imx7: Document usage on i.MX8MQ SoCs Andrey Smirnov
2018-12-17 4:37 ` Baruch Siach
2018-12-17 7:39 ` Andrey Smirnov
2018-12-17 22:51 ` Rob Herring
2018-12-17 2:38 ` [PATCH v3 3/3] reset: imx7: Add support for i.MX8MQ IP block variant Andrey Smirnov
2018-12-17 4:30 ` Aisheng Dong [this message]
2018-12-17 17:09 ` Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AM0PR04MB42114239FC75F5514554B55280BC0@AM0PR04MB4211.eurprd04.prod.outlook.com \
--to=aisheng.dong@nxp.com \
--cc=andrew.smirnov@gmail.com \
--cc=cphealy@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=hongxing.zhu@nxp.com \
--cc=l.stach@pengutronix.de \
--cc=leonard.crestez@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).