Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Andy Duan <fugang.duan@nxp.com>
To: Sven Van Asbroeck <thesven73@gmail.com>,
	Fabio Estevam <festevam@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	dl-linux-imx <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
	<linux-arm-kernel@lists.infradead.org>
Subject: RE: [EXT] Re: [PATCH v4 2/2] ARM: imx6plus: enable internal routing of clk_enet_ref where possible
Date: Tue, 30 Jun 2020 06:36:39 +0000
Message-ID: <AM6PR0402MB36077C422DABCB4F2EA650A0FF6F0@AM6PR0402MB3607.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <CAGngYiW=Pc_QjsjCv4Pc_R9OZk7nOAKm=k=b4TMbYRZ-08zKrQ@mail.gmail.com>

From: Sven Van Asbroeck <thesven73@gmail.com> Sent: Monday, June 29, 2020 10:37 PM
> On Mon, Jun 29, 2020 at 10:26 AM Fabio Estevam <festevam@gmail.com>
> wrote:
> >
> > Just tested 5.4.24_2.1.0 on an imx6qp sabresd and DHCP also fails there.
> 
> I think I discovered the problem !
> 
> When I compare the sabresd devicetree on mainline with the actual sabresd
> schematics, the devicetree is incorrect ! Things still work, but only by
> accident.
> 
> The sabresd has an AR8131 PHY, which generates the enet ref clock, not the
> imx6. So on the schematic we see that the clock output of the PHY is wired to
> imx6 ENET_REF_CLK, so it can be used as a clock source. And GPIO_16 is
> disconnected, as it should, because the imx6 is not generating the ref clk.
> 
> But the devicetree is written as if the imx6 is providing the clock ! See
> here:
> 
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit.ker
> nel.org%2Fpub%2Fscm%2Flinux%2Fkernel%2Fgit%2Fstable%2Flinux.git%2Ftr
> ee%2Farch%2Farm%2Fboot%2Fdts%2Fimx6qdl-sabresd.dtsi%3Fh%3Dv5.7.6
> %23n513&amp;data=02%7C01%7Cfugang.duan%40nxp.com%7C16c43e8d9d
> 8e4ff0b9ee08d81c39f7f2%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7
> C0%7C637290382588751887&amp;sdata=hCRNGa9WrQzQ0XYwR%2FQTQ8h
> jY7CDHjhIbXr0L33fr%2Bc%3D&amp;reserved=0
> 
> Also there is no override of the fec PTP clock:
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit.ker
> nel.org%2Fpub%2Fscm%2Flinux%2Fkernel%2Fgit%2Fstable%2Flinux.git%2Ftr
> ee%2Farch%2Farm%2Fboot%2Fdts%2Fimx6qdl-sabresd.dtsi%3Fh%3Dv5.7.6
> %23n202&amp;data=02%7C01%7Cfugang.duan%40nxp.com%7C16c43e8d9d
> 8e4ff0b9ee08d81c39f7f2%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7
> C0%7C637290382588751887&amp;sdata=qOfiLs%2FGi01h9hSA787PHfGxTN
> bfYWFXVA3IhUB553Q%3D&amp;reserved=0
> 
> Although Shawn's mainline patch mandates this?
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit.ker
> nel.org%2Fpub%2Fscm%2Flinux%2Fkernel%2Fgit%2Fstable%2Flinux.git%2Fco
> mmit%2F%3Fh%3Dv5.7.6%26id%3D810c0ca879098a993e2ce0a190d24d11c
> 17df748&amp;data=02%7C01%7Cfugang.duan%40nxp.com%7C16c43e8d9d8
> e4ff0b9ee08d81c39f7f2%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C
> 0%7C637290382588751887&amp;sdata=3PiAnDlxO8iqsVR6YQWjCk1xsg8iW
> RK8TSGee4LhkjI%3D&amp;reserved=0
> 
> This will work, but only by accident. So on a plus, when we
> (incorrectly) switch the
> bypass bit on, things stop working.

Fabio, our QA double verify 5.4.24_2.1.0, no matter SD boot or tftp/nfs boot,
both work fine on i.MX6QP sabresd board,  please double check your environment.

Sven, no matter PHY supply 125Mhz clock to pad or not,  GPR5[9] is to select RGMII
gtx clock source from:
- 0 Clock from pad
- 1 Clock from PLL

Since i.MX6QP can internally supply clock to MAC, we can set GPR5[9] bit by default.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply index

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-25 14:01 [PATCH v4 1/2] ARM: imx: mach-imx6q: Search for fsl, imx6q-iomuxc-gpr earlier Sven Van Asbroeck
2020-06-25 14:01 ` [PATCH v4 2/2] ARM: imx6plus: enable internal routing of clk_enet_ref where possible Sven Van Asbroeck
2020-06-28  5:05   ` [EXT] " Andy Duan
2020-06-29 13:09   ` Fabio Estevam
2020-06-29 13:40     ` Sven Van Asbroeck
2020-06-29 14:04       ` Fabio Estevam
2020-06-29 14:25       ` Fabio Estevam
2020-06-29 14:37         ` Sven Van Asbroeck
2020-06-30  6:36           ` Andy Duan [this message]
2020-06-30 11:49             ` [EXT] " Fabio Estevam
2020-07-01  1:31               ` Andy Duan
2020-06-30 15:23             ` Sven Van Asbroeck
2020-07-01  3:18               ` Andy Duan
2020-07-01  3:39                 ` Fabio Estevam
2020-07-01  3:42                   ` Andy Duan
2020-07-01  3:45                     ` Fabio Estevam
2020-07-01 13:51                       ` Sven Van Asbroeck
2020-07-01 15:30                         ` Andy Duan
2020-07-01 16:03                           ` Sven Van Asbroeck
2020-07-01 16:39                             ` Fabio Estevam
2020-06-30  2:24         ` Andy Duan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AM6PR0402MB36077C422DABCB4F2EA650A0FF6F0@AM6PR0402MB3607.eurprd04.prod.outlook.com \
    --to=fugang.duan@nxp.com \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=thesven73@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git