[PATCH 04/11] Define the virtual space of KASan's shadow region

[liuwenliang@huawei.com (Liuwenliang (Lamb))]

On Tue, Oct 19, 2017 at 20:41 17PM +0000, Russell King - ARM Linux:
>On Mon, Oct 16, 2017 at 11:42:05AM +0000, Liuwenliang (Lamb) wrote:
>> On 10/16/2017 07:03 PM, Abbott Liu wrote:
> >arch/arm/kernel/entry-armv.S:348: Error: selected processor does not support `movw r1,
>>   #:lower16:((((0xC0000000-0x01000000)>>3)+((0xC0000000-0x01000000)-(1<<29))))' in ARM mode
>> >arch/arm/kernel/entry-armv.S:348: Error: selected processor does not support `movt r1,
>>   #:upper16:((((0xC0000000-0x01000000)>>3)+((0xC0000000-0x01000000)-(1<<29))))' in ARM mode
>> 
>> Thanks for building test. This error can be solved by following code:
>> --- a/arch/arm/kernel/entry-armv.S
>> +++ b/arch/arm/kernel/entry-armv.S
>> @@ -188,8 +188,7 @@ ENDPROC(__und_invalid)
>>         get_thread_info tsk
>>         ldr     r0, [tsk, #TI_ADDR_LIMIT]
>>  #ifdef CONFIG_KASAN
>> -   movw r1, #:lower16:TASK_SIZE
>> -   movt r1, #:upper16:TASK_SIZE
>> + ldr r1, =TASK_SIZE
>>  #else
>>         mov r1, #TASK_SIZE
>>  #endif
>
>We can surely do better than this with macros and condition support -
>we can build-time test in the assembler whether TASK_SIZE can fit in a
>normal "mov", whether we can use the movw/movt instructions, or fall
>back to ldr if necessary.  I'd rather we avoided "ldr" here where
>possible.

Thanks for your review.
I don't know why we need to avoided "ldr". The "ldr" maybe cause the 
performance fall down, but it will be very limited, and as we know the 
performance of kasan version is lower than the normal version. And usually
we don't use kasan version in our product, we only use kasan version when 
we want to debug some memory corruption problem in laboratory(not not in
commercial product) because the performance of kasan version is lower than
normal version.

So I think we can accept the influence of the performance by using "ldr" here. 




On Tue, Oct 19, 2017 at 20:44 17PM +0000, Russell King - ARM Linux:
>On Tue, Oct 17, 2017 at 11:27:19AM +0000, Liuwenliang (Lamb) wrote:
>> ---c0a3b198:       b6e00000        .word   0xb6e00000   //TASK_SIZE:0xb6e00000
>
>It's probably going to be better all round to round TASK_SIZE down
>to something that fits in an 8-bit rotated constant anyway (like
>we already guarantee) which would mean this patch is not necessary.

Thanks for you review.
If we enable CONFIG_KASAN, we need steal 130MByte(0xb6e00000 ~ 0xbf000000) from user space.
If we change to steal 130MByte(0xb6000000 ~ 0xbe200000) , the 14MB of user space is going to be 
wasted. I think it is better to to use "ldr" whose influence to the system are very limited than to waste 
14MB user space by chaned TASK_SIZE from 0xb6e00000 from 0xb6000000.


If TASK_SIZE is an 8-bit rotated constant, the compiler can convert "ldr rx,=TASK_SIZE" into mov rx, #TASK_SIZE
If TASK_SIZE is not an 8-bit rotated constant, the compiler can convert "ldr rx,=TASK_SIZE" into ldr rx, [pc,xxx],
So we can use ldr to replace mov. Here is the code which is tested by me:

diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index f9efea3..00a1833 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -187,12 +187,7 @@ ENDPROC(__und_invalid)

        get_thread_info tsk
        ldr     r0, [tsk, #TI_ADDR_LIMIT]
-#ifdef CONFIG_KASAN
-   movw r1, #:lower16:TASK_SIZE
-   movt r1, #:upper16:TASK_SIZE
-#else
-   mov r1, #TASK_SIZE
-#endif
+ ldr r1, =TASK_SIZE
        str     r1, [tsk, #TI_ADDR_LIMIT]
        str     r0, [sp, #SVC_ADDR_LIMIT]

@@ -446,7 +441,8 @@ ENDPROC(__fiq_abt)
        @ if it was interrupted in a critical region.  Here we
        @ perform a quick test inline since it should be false
        @ 99.9999% of the time.  The rest is done out of line.
-   cmp     r4, #TASK_SIZE
+ ldr r0, =TASK_SIZE
+ cmp r4, r0
        blhs    kuser_cmpxchg64_fixup
 #endif
 #endif