linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Vasily Khoruzhick <anarsoul@gmail.com>
To: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Cc: linux-rockchip@lists.infradead.org,
	Heiko Stuebner <heiko@sntech.de>,
	arm-linux <linux-arm-kernel@lists.infradead.org>,
	linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] arm64: dts: rockchip: add analog audio nodes on rk3399-rockpro64
Date: Sun, 10 Nov 2019 16:17:02 -0800	[thread overview]
Message-ID: <CA+E=qVdvKxzFcU-09Ucn1Fr0FdkwSsPcLr8vPn2wsu6-DD1gqg@mail.gmail.com> (raw)
In-Reply-To: <20190907174833.19957-1-katsuhiro@katsuster.net>

On Sat, Sep 7, 2019 at 10:48 AM Katsuhiro Suzuki
<katsuhiro@katsuster.net> wrote:
>
> This patch adds audio codec (Everest ES8316) and I2S audio nodes for
> RK3399 RockPro64.

Hi Katsuhiro,

I tested your patch with my rockpro64 on 5.4-rc6 which has your other
patches to es8316 driver, but apparently it doesn't work.

'alsamixer' complains 'cannot load mixer controls: No such device or
address' and if I try to play audio with mpg123 it pretends that it
plays something but there's no sound.

Any idea what can be wrong?

Regards,
Vasily

> Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
> ---
>  .../boot/dts/rockchip/rk3399-rockpro64.dts    | 28 +++++++++++++++++++
>  1 file changed, 28 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
> index 0401d4ec1f45..8b1e6382b140 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
> @@ -81,6 +81,12 @@
>                 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
>         };
>
> +       sound {
> +               compatible = "audio-graph-card";
> +               label = "rockchip,rk3399";
> +               dais = <&i2s1_p0>;
> +       };
> +
>         vcc12v_dcin: vcc12v-dcin {
>                 compatible = "regulator-fixed";
>                 regulator-name = "vcc12v_dcin";
> @@ -470,6 +476,20 @@
>         i2c-scl-rising-time-ns = <300>;
>         i2c-scl-falling-time-ns = <15>;
>         status = "okay";
> +
> +       es8316: codec@11 {
> +               compatible = "everest,es8316";
> +               reg = <0x11>;
> +               clocks = <&cru SCLK_I2S_8CH_OUT>;
> +               clock-names = "mclk";
> +               #sound-dai-cells = <0>;
> +
> +               port {
> +                       es8316_p0_0: endpoint {
> +                               remote-endpoint = <&i2s1_p0_0>;
> +                       };
> +               };
> +       };
>  };
>
>  &i2c3 {
> @@ -505,6 +525,14 @@
>         rockchip,playback-channels = <2>;
>         rockchip,capture-channels = <2>;
>         status = "okay";
> +
> +       i2s1_p0: port {
> +               i2s1_p0_0: endpoint {
> +                       dai-format = "i2s";
> +                       mclk-fs = <256>;
> +                       remote-endpoint = <&es8316_p0_0>;
> +               };
> +       };
>  };
>
>  &i2s2 {
> --
> 2.23.0.rc1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-11-11  0:17 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-07 17:48 [PATCH] arm64: dts: rockchip: add analog audio nodes on rk3399-rockpro64 Katsuhiro Suzuki
2019-10-04 17:26 ` Katsuhiro Suzuki
2019-10-04 19:54   ` Heiko Stuebner
2019-11-11  0:17 ` Vasily Khoruzhick [this message]
2019-11-11  3:30   ` Katsuhiro Suzuki
2019-11-11  5:40     ` Vasily Khoruzhick
2019-11-11 19:25       ` Vasily Khoruzhick
2019-11-12  5:34         ` Katsuhiro Suzuki
2019-11-12  5:43           ` Vasily Khoruzhick
2019-11-12  5:49             ` Vasily Khoruzhick
2019-11-12 18:34               ` Katsuhiro Suzuki
2019-11-12 19:46                 ` Vasily Khoruzhick
2019-11-13 15:02                   ` Hugh Cole-Baker
2019-11-15  9:28                     ` Katsuhiro Suzuki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CA+E=qVdvKxzFcU-09Ucn1Fr0FdkwSsPcLr8vPn2wsu6-DD1gqg@mail.gmail.com' \
    --to=anarsoul@gmail.com \
    --cc=heiko@sntech.de \
    --cc=katsuhiro@katsuster.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).