linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Robert Marko <robert.marko@sartura.hr>
To: Elad Nachman <enachman@marvell.com>
Cc: "Pali Rohár" <pali@kernel.org>,
	"Wojciech Bartczak" <wbartczak@marvell.com>,
	"Marek Behún" <kabel@kernel.org>,
	"Viresh Kumar" <viresh.kumar@linaro.org>,
	"Gregory CLEMENT" <gregory.clement@bootlin.com>,
	"Tomasz Maciej Nowak" <tmn505@gmail.com>,
	"Anders Trier Olesen" <anders.trier.olesen@gmail.com>,
	"Philip Soares" <philips@netisense.com>,
	"linux-pm@vger.kernel.org" <linux-pm@vger.kernel.org>,
	"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>, nnet <nnet@fastmail.fm>,
	"Gérald Kerma" <gandalf@gk2.net>
Subject: Re: [EXT] Re: [PATCH v2] cpufreq: armada-37xx: forbid cpufreq for 1.2 GHz variant
Date: Tue, 2 Aug 2022 18:42:12 +0200	[thread overview]
Message-ID: <CA+HBbNEHRhU4HOK-NGGLxak0UUfwjZvtkuLtzCk=fvSaS=MMEA@mail.gmail.com> (raw)
In-Reply-To: <BN9PR18MB42518C761E574D862D30CDA7DB9A9@BN9PR18MB4251.namprd18.prod.outlook.com>

On Mon, Aug 1, 2022 at 8:50 PM Elad Nachman <enachman@marvell.com> wrote:
>
> Hi Pali,
>
> Could you please provide the crash dump / call trace?
>
> Also, if you can please annotate with printk the exact voltage/frequency changes taken by the driver, up to the point of the crash?
>
> This will help understand the sequence of events leading to the crash.
>
> Thanks,
>
> Elad.


Hi Elad,
Here are 2 bootlogs, but I dont think they are of any use as the
traces are rather random
and they are always different, like a real voltage issue:
https://gist.github.com/robimarko/113216f566ccf159dfd33933889da042
https://gist.github.com/robimarko/990d757870d44a3c5acdfeb957547705

Here is a bootleg with the frequency changes, OPP points that are set
by the CPUFreq driver are also here:
https://gist.github.com/robimarko/1a81b0c6e93735b75ff4461d405c8033

I am still digging to print the voltage changes as _set_opp_voltage is
not being used.

Regards,
Robert
>
>
> ________________________________
> מאת: Pali Rohár <pali@kernel.org>
> ‏‏נשלח: יום שני 01 אוגוסט 2022 20:56
> ‏‏אל: Elad Nachman <enachman@marvell.com>
> עותק: Wojciech Bartczak <wbartczak@marvell.com>; Marek Behún <kabel@kernel.org>; Viresh Kumar <viresh.kumar@linaro.org>; Gregory CLEMENT <gregory.clement@bootlin.com>; Robert Marko <robert.marko@sartura.hr>; Tomasz Maciej Nowak <tmn505@gmail.com>; Anders Trier Olesen <anders.trier.olesen@gmail.com>; Philip Soares <philips@netisense.com>; linux-pm@vger.kernel.org <linux-pm@vger.kernel.org>; Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>; linux-arm-kernel@lists.infradead.org <linux-arm-kernel@lists.infradead.org>; nnet <nnet@fastmail.fm>; Gérald Kerma <gandalf@gk2.net>
> ‏‏נושא: Re: [EXT] Re: [PATCH v2] cpufreq: armada-37xx: forbid cpufreq for 1.2 GHz variant
>
> Hello Elad!
>
> Robert (in CC) tested this proposed change. But increasing delay to
> 100ms does not help. CPU still crashes early during boot.
>
> On Monday 01 August 2022 14:15:27 Elad Nachman wrote:
> > Hi,
> >
> > As first step, please try to increase the delay to 100ms, see if it helps.
> >
> > Elad.
> >
> > -----Original Message-----
> > From: Pali Rohár <pali@kernel.org>
> > Sent: Monday, August 1, 2022 5:13 PM
> > To: Elad Nachman <enachman@marvell.com>
> > Cc: Wojciech Bartczak <wbartczak@marvell.com>; Marek Behún <kabel@kernel.org>; Viresh Kumar <viresh.kumar@linaro.org>; Gregory CLEMENT <gregory.clement@bootlin.com>; Robert Marko <robert.marko@sartura.hr>; Tomasz Maciej Nowak <tmn505@gmail.com>; Anders Trier Olesen <anders.trier.olesen@gmail.com>; Philip Soares <philips@netisense.com>; linux-pm@vger.kernel.org; Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>; linux-arm-kernel@lists.infradead.org; nnet <nnet@fastmail.fm>
> > Subject: Re: [EXT] Re: [PATCH v2] cpufreq: armada-37xx: forbid cpufreq for 1.2 GHz variant
> >
> > Hello Elad and thank you for response!
> >
> > This errata is already implemented in the kernel for a longer time by Gregory's commit:
> > https://urldefense.proofpoint.com/v2/url?u=https-3A__git.kernel.org_pub_scm_linux_kernel_git_stable_linux.git_commit_-3Fid-3D61c40f35f5cd6f67ccbd7319a1722eb78c815989&d=DwIDaQ&c=nKjWec2b6R0mOyPaz7xtfQ&r=eTeNTLEK5-TxXczjOcKPhANIFtlB9pP4lq9qhdlFrwQ&m=-E-AwB9STVx8xgapaCNSpDJIPPnkrzrWkZX0uFz2bfNGFnckZelT_XaovUUPrNIg&s=4EUcdDWB_gqnEV8nREQi9E_iym5bjoM6l5zLrbh_GVs&e=
> >
> > There is also 20ms delay after L2/L3 to L1 state switch.
> >
> > Any idea what could be wrong here? Or is something more than above commit needed to correctly implement that errata?
> >
> > On Monday 01 August 2022 14:01:07 Elad Nachman wrote:
> > > Hi Pali,
> > >
> > > There is an errata for that.
> > >
> > > "
> > > Switching from L2/L3 state (200/300 MHz) to L0 state (1200 MHz)
> > > requires sudden changes of VDD supply, and it requires time to
> > > stabilize the VDD supply. The solution is to use gradual switching from L2/L3 to L1 and then L1 to L0 state.
> > > "
> > >
> > > I would also add additional delay for the VDD supply stabilization.
> > >
> > > FYI,
> > >
> > > Elad.
> > >
> > > -----Original Message-----
> > > From: Pali Rohár <pali@kernel.org>
> > > Sent: Monday, August 1, 2022 3:36 PM
> > > To: Elad Nachman <enachman@marvell.com>; Wojciech Bartczak
> > > <wbartczak@marvell.com>
> > > Cc: Marek Behún <kabel@kernel.org>; Viresh Kumar
> > > <viresh.kumar@linaro.org>; Gregory CLEMENT
> > > <gregory.clement@bootlin.com>; Robert Marko <robert.marko@sartura.hr>;
> > > Tomasz Maciej Nowak <tmn505@gmail.com>; Anders Trier Olesen
> > > <anders.trier.olesen@gmail.com>; Philip Soares
> > > <philips@netisense.com>; linux-pm@vger.kernel.org; Sebastian
> > > Hesselbarth <sebastian.hesselbarth@gmail.com>;
> > > linux-arm-kernel@lists.infradead.org; nnet <nnet@fastmail.fm>
> > > Subject: [EXT] Re: [PATCH v2] cpufreq: armada-37xx: forbid cpufreq for
> > > 1.2 GHz variant
> > >
> > > External Email
> > >
> > > ----------------------------------------------------------------------
> > > + Elad and Wojciech from Marvell
> > >
> > > Could you please look at this issue and/or forward it to relevant Marvell team?
> > >
> > > Maintainer Viresh already wrote that we cannot hang forever for Marvell and patch which disables support for 1.2 GHz was merged:
> > > https://urldefense.proofpoint.com/v2/url?u=https-3A__lore.kernel.org_l
> > > inux-2Dpm_20210809040224.j2rvopmmqda3utc5-40vireshk-2Di7_&d=DwIDaQ&c=n
> > > KjWec2b6R0mOyPaz7xtfQ&r=eTeNTLEK5-TxXczjOcKPhANIFtlB9pP4lq9qhdlFrwQ&m=
> > > 5nMMKyKOOM3XdMe_PerZRx8L7-D7MkWhCl7GxpXTPiotVf1TR4j8v3bpjQmRKCLC&s=cXi
> > > CZByknfz1rOIgJl4fJHl1KLLRq2shHul2-VPpYP0&e=
> > >
> > > On Sunday 08 August 2021 21:30:26 Pali Rohár wrote:
> > > > Gentle reminder. This is really serious issue. Could you please look at it?
> > > >
> > > > Adding more MarvellEmbeddedProcessors people to the loop: Evan,
> > > > Benjamin an Igal
> > > >
> > > > On Thursday 15 July 2021 21:33:21 Pali Rohár wrote:
> > > > > Ping! Gentle reminder for Marvell people.
> > > > >
> > > > > On Thursday 08 July 2021 16:34:51 Pali Rohár wrote:
> > > > > > Konstantin, Nadav, Ken, Victor, Jason: This issue is pretty
> > > > > > serious, CPU on 1.2GHz A3720 is crashing. Could you please look at it?
> > > > > >
> > > > > > On Friday 02 July 2021 18:30:35 Pali Rohár wrote:
> > > > > > > +Jason from GlobalScale as this issue affects GlobalScale Espressobin Ultra and V7 1.2 GHz boards.
> > > > > > >
> > > > > > > On Thursday 01 July 2021 00:56:01 Marek Behún wrote:
> > > > > > > > The 1.2 GHz variant of the Armada 3720 SOC is unstable with
> > > > > > > > DVFS: when the SOC boots, the WTMI firmware sets clocks and
> > > > > > > > AVS values that work correctly with 1.2 GHz CPU frequency,
> > > > > > > > but random crashes occur once cpufreq driver starts scaling.
> > > > > > > >
> > > > > > > > We do not know currently what is the reason:
> > > > > > > > - it may be that the voltage value for L0 for 1.2 GHz variant provided
> > > > > > > >   by the vendor in the OTP is simply incorrect when scaling
> > > > > > > > is used,
> > > > > > > > - it may be that some delay is needed somewhere,
> > > > > > > > - it may be something else.
> > > > > > > >
> > > > > > > > The most sane solution now seems to be to simply forbid the
> > > > > > > > cpufreq driver on 1.2 GHz variant.
> > > > > > > >
> > > > > > > > Signed-off-by: Marek Behún <kabel@kernel.org>
> > > > > > > > Fixes: 92ce45fb875d ("cpufreq: Add DVFS support for Armada
> > > > > > > > 37xx")
> > > > > > > > ---
> > > > > > > > If someone from Marvell could look into this, it would be
> > > > > > > > great since basically 1.2 GHz variant cannot scale, which is
> > > > > > > > a feature that was claimed to be supported by the SOC.
> > > > > > > >
> > > > > > > > Ken Ma / Victor Gu, you have worked on commit
> > > > > > > > https://urldefense.proofpoint.com/v2/url?u=https-3A__github.
> > > > > > > > co
> > > > > > > > m_MarvellEmbeddedProcessors_linux-2Dmarvell_commit_d6719fdc2
> > > > > > > > b3
> > > > > > > > cac58064f41b531f86993c919aa9a&d=DwIDaQ&c=nKjWec2b6R0mOyPaz7x
> > > > > > > > tf
> > > > > > > > Q&r=eTeNTLEK5-TxXczjOcKPhANIFtlB9pP4lq9qhdlFrwQ&m=5nMMKyKOOM
> > > > > > > > 3X
> > > > > > > > dMe_PerZRx8L7-D7MkWhCl7GxpXTPiotVf1TR4j8v3bpjQmRKCLC&s=b9cDK
> > > > > > > > em t70OiTJF6KXj0ySzbxpsB_nuteXJE87via80&e=
> > > > > > > > in linux-marvell.
> > > > > > > > Your patch takes away the 1202 mV constant for 1.2 GHz base
> > > > > > > > CPU frequency and instead adds code that computes the
> > > > > > > > voltages from the voltage found in L0 AVS register (which is filled in by WTMI firmware).
> > > > > > > >
> > > > > > > > Do you know why the code does not work correctly for some
> > > > > > > > 1.2 GHz boards? Do we need to force the L0 voltage to 1202
> > > > > > > > mV if it is lower, or something?
> > > > > > > > ---
> > > > > > > >  drivers/cpufreq/armada-37xx-cpufreq.c | 6 +++++-
> > > > > > > >  1 file changed, 5 insertions(+), 1 deletion(-)
> > > > > > > >
> > > > > > > > diff --git a/drivers/cpufreq/armada-37xx-cpufreq.c
> > > > > > > > b/drivers/cpufreq/armada-37xx-cpufreq.c
> > > > > > > > index 3fc98a3ffd91..c10fc33b29b1 100644
> > > > > > > > --- a/drivers/cpufreq/armada-37xx-cpufreq.c
> > > > > > > > +++ b/drivers/cpufreq/armada-37xx-cpufreq.c
> > > > > > > > @@ -104,7 +104,11 @@ struct armada_37xx_dvfs {  };
> > > > > > > >
> > > > > > > >  static struct armada_37xx_dvfs armada_37xx_dvfs[] = {
> > > > > > > > - {.cpu_freq_max = 1200*1000*1000, .divider = {1, 2, 4, 6} },
> > > > > > > > + /*
> > > > > > > > +  * The cpufreq scaling for 1.2 GHz variant of the SOC is currently
> > > > > > > > +  * unstable because we do not know how to configure it properly.
> > > > > > > > +  */
> > > > > > > > + /* {.cpu_freq_max = 1200*1000*1000, .divider = {1, 2, 4,
> > > > > > > > +6} }, */
> > > > > > > >    {.cpu_freq_max = 1000*1000*1000, .divider = {1, 2, 4, 5} },
> > > > > > > >    {.cpu_freq_max = 800*1000*1000,  .divider = {1, 2, 3, 4} },
> > > > > > > >    {.cpu_freq_max = 600*1000*1000,  .divider = {2, 4, 5, 6}
> > > > > > > > },
> > > > > > > > --
> > > > > > > > 2.31.1
> > > > > > > >



-- 
Robert Marko
Staff Embedded Linux Engineer
Sartura Ltd.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.marko@sartura.hr
Web: www.sartura.hr

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-08-02 16:43 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-30 13:59 [PATCH] cpufreq: armada-37xx: forbid cpufreq for 1.2 GHz variant Marek Behún
2021-06-30 14:02 ` Marek Behún
2021-06-30 15:22 ` Andrew Lunn
2021-06-30 22:56 ` [PATCH v2] " Marek Behún
2021-07-01  2:05   ` Viresh Kumar
2021-07-02 16:30   ` Pali Rohár
2021-07-08 14:34     ` Pali Rohár
2021-07-15 19:33       ` Pali Rohár
2021-08-08 19:30         ` Pali Rohár
2021-08-09  4:02           ` Viresh Kumar
2022-08-01 12:36           ` Pali Rohár
2022-08-01 14:01             ` [EXT] " Elad Nachman
2022-08-01 14:12               ` Pali Rohár
2022-08-01 14:15                 ` Elad Nachman
2022-08-01 17:56                   ` Pali Rohár
     [not found]                     ` <BN9PR18MB42518C761E574D862D30CDA7DB9A9@BN9PR18MB4251.namprd18.prod.outlook.com>
2022-08-02 16:42                       ` Robert Marko [this message]
2022-08-02 16:52                         ` Elad Nachman
2022-08-02 16:56                           ` Robert Marko
2022-08-02 17:17                             ` Pali Rohár
2022-08-17  9:40                               ` Robert Marko
2022-08-17 23:10                                 ` Pali Rohár
2022-08-18  8:14                                   ` Robert Marko
2022-08-25 21:49                                     ` Pali Rohár

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CA+HBbNEHRhU4HOK-NGGLxak0UUfwjZvtkuLtzCk=fvSaS=MMEA@mail.gmail.com' \
    --to=robert.marko@sartura.hr \
    --cc=anders.trier.olesen@gmail.com \
    --cc=enachman@marvell.com \
    --cc=gandalf@gk2.net \
    --cc=gregory.clement@bootlin.com \
    --cc=kabel@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=nnet@fastmail.fm \
    --cc=pali@kernel.org \
    --cc=philips@netisense.com \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=tmn505@gmail.com \
    --cc=viresh.kumar@linaro.org \
    --cc=wbartczak@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).