* [PATCH v3 1/5] dt-bindings: gpio: aspeed: Update documentation with ast2600 controllers
@ 2019-09-06 6:25 Rashmica Gupta
2019-09-11 10:03 ` Linus Walleij
0 siblings, 1 reply; 2+ messages in thread
From: Rashmica Gupta @ 2019-09-06 6:25 UTC (permalink / raw)
To: linus.walleij
Cc: Mark Rutland,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM/ASPEED MACHINE SUPPORT,
open list:GPIO SUBSYSTEM, Andrew Jeffery, open list,
Bartosz Golaszewski, Rob Herring, Joel Stanley, Rashmica Gupta,
moderated list:ARM/ASPEED MACHINE SUPPORT
The ast2600 is a new generation of SoC from ASPEED. Similarly to the
ast2400 and ast2500, it has a GPIO controller for it's 3.3V GPIO pins.
Additionally, it has a GPIO controller for 36 1.8V GPIO pins. We use
the ngpio property to differentiate between these controllers.
Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
---
Documentation/devicetree/bindings/gpio/gpio-aspeed.txt | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
index 7e9b586770b0..b2033fc3a71a 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
@@ -2,7 +2,8 @@ Aspeed GPIO controller Device Tree Bindings
-------------------------------------------
Required properties:
-- compatible : Either "aspeed,ast2400-gpio" or "aspeed,ast2500-gpio"
+- compatible : Either "aspeed,ast2400-gpio", "aspeed,ast2500-gpio",
+ or "aspeed,ast2600-gpio".
- #gpio-cells : Should be two
- First cell is the GPIO line number
@@ -17,7 +18,9 @@ Required properties:
Optional properties:
-- clocks : A phandle to the clock to use for debounce timings
+- clocks : A phandle to the clock to use for debounce timings
+- ngpios : Number of GPIOs controlled by this controller. Should be set
+ when there are multiple GPIO controllers on a SoC (ast2600).
The gpio and interrupt properties are further described in their respective
bindings documentation:
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v3 1/5] dt-bindings: gpio: aspeed: Update documentation with ast2600 controllers
2019-09-06 6:25 [PATCH v3 1/5] dt-bindings: gpio: aspeed: Update documentation with ast2600 controllers Rashmica Gupta
@ 2019-09-11 10:03 ` Linus Walleij
0 siblings, 0 replies; 2+ messages in thread
From: Linus Walleij @ 2019-09-11 10:03 UTC (permalink / raw)
To: Rashmica Gupta
Cc: Mark Rutland,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM/ASPEED MACHINE SUPPORT,
open list:GPIO SUBSYSTEM, Andrew Jeffery, open list,
Bartosz Golaszewski, Rob Herring, Joel Stanley,
moderated list:ARM/ASPEED MACHINE SUPPORT
On Fri, Sep 6, 2019 at 7:25 AM Rashmica Gupta <rashmica.g@gmail.com> wrote:
> The ast2600 is a new generation of SoC from ASPEED. Similarly to the
> ast2400 and ast2500, it has a GPIO controller for it's 3.3V GPIO pins.
> Additionally, it has a GPIO controller for 36 1.8V GPIO pins. We use
> the ngpio property to differentiate between these controllers.
>
> Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
The changes are uncontroversial (uses just standard GPIO
ngpios and adds a compatible) so patch applied.
Yours,
Linus Walleij
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-09-11 10:04 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-06 6:25 [PATCH v3 1/5] dt-bindings: gpio: aspeed: Update documentation with ast2600 controllers Rashmica Gupta
2019-09-11 10:03 ` Linus Walleij
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).