linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v10 0/3] Add basic SoC Support for Mediatek MT6779 SoC
@ 2020-07-30 13:30 Hanks Chen
  2020-07-30 13:30 ` [PATCH v10 1/3] dt-bindings: pinctrl: add bindings for MediaTek " Hanks Chen
                   ` (2 more replies)
  0 siblings, 3 replies; 16+ messages in thread
From: Hanks Chen @ 2020-07-30 13:30 UTC (permalink / raw)
  To: Linus Walleij, Rob Herring, Matthias Brugger, Michael Turquette,
	Stephen Boyd
  Cc: devicetree, CC Hwang, Andy Teng, Hanks Chen, YueHaibing,
	linux-kernel, linux-gpio, linux-mediatek, Loda Chou, mtk01761,
	linux-clk, linux-arm-kernel


Change since v10:
Commit "dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC"
-- remove the patches which were applied to linux-next
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=b07b616214857c9db01e2807cde2f6bba8019fc3
-- follow the latest 'dt-schema' and fix the dts sample


Change since v9:
Commit "dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC"
-- remove driving desciprtion and reuse the generic schemas.
Commit "pinctrl: mediatek: add pinctrl support for MT6779 SoC"
-- fix build error to support ko.
-- follow the APIs as below.
Commit "arm64: dts: add dts nodes for MT6779"
-- remove the clk interface of UART3 in another mail thread.
   https://lkml.org/lkml/2020/7/21/1444


Change since v8:
Commit "dt-bindings: pinctrl: add bindings for MediaTek"
-- update the format
Commit "arm64: dts: add dts nodes for MT6779"
-- fix the typo in uart node


Change since v7:
Commit "dt-bindings: pinctrl: add bindings for MediaTek"
-- fix typo and change order of patch
Commit "clk: mediatek: add UART0 clock support"
-- add fixes tag and real name
Commit "arm64: dts: add dts nodes for MT6779"
-- expose all three UARTs in the dtsi


Change since v6:
Commit "dt-bindings: pinctrl: add bindings for MediaTek"
-- fix format of bindings and add interrupt definition.
Commit "pinctrl: mediatek: update pinmux definitions for"
-- use the standard include path
Commit "pinctrl: mediatek: avoid virtual gpio trying to set"
-- remove unnecessary error handler
Commit "pinctrl: mediatek: add pinctrl support for MT6779 SoC"
-- add some useful help text in kconfig
Commit "clk: mediatek: add UART0 clock support"
-- add UART0 clock support
Commit "arm64: dts: add dts nodes for MT6779"
-- add "baud" and "bus" clocks for uart
-- add new approach for mmsys


Change since v5:
1. remove unnecessary string in commit message


Change since v4:
1. fix format of pinctrl bindings


Change since v3:
1. add bindings for "mediatek,mt6779-pinctrl"
2. add some comments into the code (e.g. virtual gpio ...)
3. add Acked-by tags
4. add pmu node into dts
5. support ppi partition and fix base address in gic node of dts


Change since v2:
1. add Reviewed-by tags
2. fix checkpatch warnings with strict level


Change since v1:
first patchset


Andy Teng (1):
  dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC

Hanks Chen (2):
  arm64: dts: add dts nodes for MT6779
  clk: mediatek: add UART0 clock support

 .../pinctrl/mediatek,mt6779-pinctrl.yaml      | 202 +++++++++++++
 arch/arm64/boot/dts/mediatek/Makefile         |   1 +
 arch/arm64/boot/dts/mediatek/mt6779-evb.dts   |  31 ++
 arch/arm64/boot/dts/mediatek/mt6779.dtsi      | 271 ++++++++++++++++++
 drivers/clk/mediatek/clk-mt6779.c             |   2 +
 5 files changed, 507 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
 create mode 100644 arch/arm64/boot/dts/mediatek/mt6779-evb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt6779.dtsi

-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v10 1/3] dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC
  2020-07-30 13:30 [PATCH v10 0/3] Add basic SoC Support for Mediatek MT6779 SoC Hanks Chen
@ 2020-07-30 13:30 ` Hanks Chen
  2020-07-31 18:26   ` Rob Herring
  2020-08-03 23:31   ` Linus Walleij
  2020-07-30 13:30 ` [PATCH v10 2/3] arm64: dts: add dts nodes for MT6779 Hanks Chen
  2020-07-30 13:30 ` [PATCH v10 3/3] clk: mediatek: add UART0 clock support Hanks Chen
  2 siblings, 2 replies; 16+ messages in thread
From: Hanks Chen @ 2020-07-30 13:30 UTC (permalink / raw)
  To: Linus Walleij, Rob Herring, Matthias Brugger, Michael Turquette,
	Stephen Boyd
  Cc: devicetree, CC Hwang, Andy Teng, Hanks Chen, YueHaibing,
	linux-kernel, linux-gpio, linux-mediatek, Loda Chou, mtk01761,
	linux-clk, linux-arm-kernel

From: Andy Teng <andy.teng@mediatek.com>

Add devicetree bindings for MediaTek MT6779 pinctrl driver.

Signed-off-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
---
 .../pinctrl/mediatek,mt6779-pinctrl.yaml      | 202 ++++++++++++++++++
 1 file changed, 202 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
new file mode 100644
index 000000000000..152c151c27ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
@@ -0,0 +1,202 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6779-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6779 Pin Controller Device Tree Bindings
+
+maintainers:
+  - Andy Teng <andy.teng@mediatek.com>
+
+description: |+
+  The pin controller node should be the child of a syscon node with the
+  required property:
+  - compatible: "syscon"
+
+properties:
+  compatible:
+    const: mediatek,mt6779-pinctrl
+
+  reg:
+    minItems: 9
+    maxItems: 9
+
+  reg-names:
+    items:
+      - const: "gpio"
+      - const: "iocfg_rm"
+      - const: "iocfg_br"
+      - const: "iocfg_lm"
+      - const: "iocfg_lb"
+      - const: "iocfg_rt"
+      - const: "iocfg_lt"
+      - const: "iocfg_tl"
+      - const: "eint"
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO
+      binding is used, the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+
+  gpio-ranges:
+    minItems: 1
+    maxItems: 5
+    description: |
+      GPIO valid number range.
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+    description: |
+      Specifies the summary IRQ.
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - gpio-controller
+  - "#gpio-cells"
+  - gpio-ranges
+  - interrupt-controller
+  - interrupts
+  - "#interrupt-cells"
+
+patternProperties:
+  '-[0-9]*$':
+    type: object
+    patternProperties:
+      '-pins*$':
+        type: object
+        description: |
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input schmitt.
+        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+        properties:
+          pinmux:
+            description:
+              integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are defined
+              as macros in boot/dts/<soc>-pinfunc.h directly.
+
+          bias-disable: true
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          input-disable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          mediatek,pull-up-adv:
+            description: |
+              Pull up setings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,pull-down-adv:
+            description: |
+              Pull down settings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+        required:
+          - pinmux
+
+        additionalProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/mt6779-pinfunc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pio: pinctrl@10005000 {
+            compatible = "mediatek,mt6779-pinctrl";
+            reg = <0 0x10005000 0 0x1000>,
+                <0 0x11c20000 0 0x1000>,
+                <0 0x11d10000 0 0x1000>,
+                <0 0x11e20000 0 0x1000>,
+                <0 0x11e70000 0 0x1000>,
+                <0 0x11ea0000 0 0x1000>,
+                <0 0x11f20000 0 0x1000>,
+                <0 0x11f30000 0 0x1000>,
+                <0 0x1000b000 0 0x1000>;
+            reg-names = "gpio", "iocfg_rm",
+              "iocfg_br", "iocfg_lm",
+              "iocfg_lb", "iocfg_rt",
+              "iocfg_lt", "iocfg_tl",
+              "eint";
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pio 0 0 210>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+
+            mmc0_pins_default: mmc0-0 {
+                cmd-dat-pins {
+                    pinmux = <PINMUX_GPIO168__FUNC_MSDC0_DAT0>,
+                        <PINMUX_GPIO172__FUNC_MSDC0_DAT1>,
+                        <PINMUX_GPIO169__FUNC_MSDC0_DAT2>,
+                        <PINMUX_GPIO177__FUNC_MSDC0_DAT3>,
+                        <PINMUX_GPIO170__FUNC_MSDC0_DAT4>,
+                        <PINMUX_GPIO173__FUNC_MSDC0_DAT5>,
+                        <PINMUX_GPIO171__FUNC_MSDC0_DAT6>,
+                        <PINMUX_GPIO174__FUNC_MSDC0_DAT7>,
+                        <PINMUX_GPIO167__FUNC_MSDC0_CMD>;
+                    input-enable;
+                    mediatek,pull-up-adv = <1>;
+                };
+                clk-pins {
+                    pinmux = <PINMUX_GPIO176__FUNC_MSDC0_CLK>;
+                    mediatek,pull-down-adv = <2>;
+                };
+                rst-pins {
+                    pinmux = <PINMUX_GPIO178__FUNC_MSDC0_RSTB>;
+                    mediatek,pull-up-adv = <0>;
+                };
+            };
+        };
+
+        mmc0 {
+           pinctrl-0 = <&mmc0_pins_default>;
+           pinctrl-names = "default";
+        };
+    };
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 16+ messages in thread

* [PATCH v10 2/3] arm64: dts: add dts nodes for MT6779
  2020-07-30 13:30 [PATCH v10 0/3] Add basic SoC Support for Mediatek MT6779 SoC Hanks Chen
  2020-07-30 13:30 ` [PATCH v10 1/3] dt-bindings: pinctrl: add bindings for MediaTek " Hanks Chen
@ 2020-07-30 13:30 ` Hanks Chen
  2020-08-05  2:24   ` Hanks Chen
  2020-10-09 12:30   ` Matthias Brugger
  2020-07-30 13:30 ` [PATCH v10 3/3] clk: mediatek: add UART0 clock support Hanks Chen
  2 siblings, 2 replies; 16+ messages in thread
From: Hanks Chen @ 2020-07-30 13:30 UTC (permalink / raw)
  To: Linus Walleij, Rob Herring, Matthias Brugger, Michael Turquette,
	Stephen Boyd
  Cc: devicetree, CC Hwang, Andy Teng, Hanks Chen, YueHaibing,
	linux-kernel, linux-gpio, linux-mediatek, Loda Chou, mtk01761,
	linux-clk, linux-arm-kernel

this adds initial MT6779 dts settings for board support,
including cpu, gic, timer, ccf, pinctrl, uart, sysirq...etc.

Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/Makefile       |   1 +
 arch/arm64/boot/dts/mediatek/mt6779-evb.dts |  31 +++
 arch/arm64/boot/dts/mediatek/mt6779.dtsi    | 271 ++++++++++++++++++++
 3 files changed, 303 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt6779-evb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt6779.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index a57af9da9f5c..4d1b0f9d8d1c 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6779-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
new file mode 100644
index 000000000000..164f5cbb3821
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include "mt6779.dtsi"
+
+/ {
+	model = "MediaTek MT6779 EVB";
+	compatible = "mediatek,mt6779-evb", "mediatek,mt6779";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x1e800000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
new file mode 100644
index 000000000000..370f309d32de
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ */
+
+#include <dt-bindings/clock/mt6779-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/mt6779-pinfunc.h>
+
+/ {
+	compatible = "mediatek,mt6779";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x100>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x200>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x300>;
+		};
+
+		cpu4: cpu@4 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x400>;
+		};
+
+		cpu5: cpu@5 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x500>;
+		};
+
+		cpu6: cpu@6 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a75";
+			enable-method = "psci";
+			reg = <0x600>;
+		};
+
+		cpu7: cpu@7 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a75";
+			enable-method = "psci";
+			reg = <0x700>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW 0>;
+	};
+
+	clk26m: oscillator@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator@1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@0c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,  /* GICD */
+			      <0 0x0c040000 0 0x200000>; /* GICR */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 \
+						&cpu2 &cpu3 &cpu4 &cpu5>;
+				};
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu6 &cpu7>;
+				};
+			};
+
+		};
+
+		sysirq: intpol-controller@0c53a650 {
+			compatible = "mediatek,mt6779-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x0c53a650 0 0x50>;
+		};
+
+		topckgen: clock-controller@10000000 {
+			compatible = "mediatek,mt6779-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg_ao: clock-controller@10001000 {
+			compatible = "mediatek,mt6779-infracfg_ao", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt6779-pinctrl", "syscon";
+			reg = <0 0x10005000 0 0x1000>,
+			      <0 0x11c20000 0 0x1000>,
+			      <0 0x11d10000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11e70000 0 0x1000>,
+			      <0 0x11ea0000 0 0x1000>,
+			      <0 0x11f20000 0 0x1000>,
+			      <0 0x11f30000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio", "iocfg_rm",
+				    "iocfg_br", "iocfg_lm",
+				    "iocfg_lb", "iocfg_rt",
+				    "iocfg_lt", "iocfg_tl",
+				    "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 210>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apmixed: clock-controller@1000c000 {
+			compatible = "mediatek,mt6779-apmixed", "syscon";
+			reg = <0 0x1000c000 0 0xe00>;
+			#clock-cells = <1>;
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt6779-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt6779-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt6779-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART2>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		audio: clock-controller@11210000 {
+			compatible = "mediatek,mt6779-audio", "syscon";
+			reg = <0 0x11210000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mfgcfg: clock-controller@13fbf000 {
+			compatible = "mediatek,mt6779-mfgcfg", "syscon";
+			reg = <0 0x13fbf000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mmsys: syscon@14000000 {
+			compatible = "mediatek,mt6779-mmsys", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys: clock-controller@15020000 {
+			compatible = "mediatek,mt6779-imgsys", "syscon";
+			reg = <0 0x15020000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vdecsys: clock-controller@16000000 {
+			compatible = "mediatek,mt6779-vdecsys", "syscon";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vencsys: clock-controller@17000000 {
+			compatible = "mediatek,mt6779-vencsys", "syscon";
+			reg = <0 0x17000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys: clock-controller@1a000000 {
+			compatible = "mediatek,mt6779-camsys", "syscon";
+			reg = <0 0x1a000000 0 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		ipesys: clock-controller@1b000000 {
+			compatible = "mediatek,mt6779-ipesys", "syscon";
+			reg = <0 0x1b000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+	};
+};
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 16+ messages in thread

* [PATCH v10 3/3] clk: mediatek: add UART0 clock support
  2020-07-30 13:30 [PATCH v10 0/3] Add basic SoC Support for Mediatek MT6779 SoC Hanks Chen
  2020-07-30 13:30 ` [PATCH v10 1/3] dt-bindings: pinctrl: add bindings for MediaTek " Hanks Chen
  2020-07-30 13:30 ` [PATCH v10 2/3] arm64: dts: add dts nodes for MT6779 Hanks Chen
@ 2020-07-30 13:30 ` Hanks Chen
  2020-09-08  6:25   ` Hanks Chen
  2020-10-08 21:45   ` Stephen Boyd
  2 siblings, 2 replies; 16+ messages in thread
From: Hanks Chen @ 2020-07-30 13:30 UTC (permalink / raw)
  To: Linus Walleij, Rob Herring, Matthias Brugger, Michael Turquette,
	Stephen Boyd
  Cc: devicetree, CC Hwang, Andy Teng, Hanks Chen, YueHaibing,
	linux-kernel, linux-gpio, linux-mediatek, Loda Chou, mtk01761,
	linux-clk, linux-arm-kernel

Add MT6779 UART0 clock support.

Fixes: 710774e04861 ("clk: mediatek: Add MT6779 clock support")
Signed-off-by: Wendell Lin <wendell.lin@mediatek.com>
Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
---
 drivers/clk/mediatek/clk-mt6779.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/mediatek/clk-mt6779.c b/drivers/clk/mediatek/clk-mt6779.c
index 9766cccf5844..6e0d3a166729 100644
--- a/drivers/clk/mediatek/clk-mt6779.c
+++ b/drivers/clk/mediatek/clk-mt6779.c
@@ -919,6 +919,8 @@ static const struct mtk_gate infra_clks[] = {
 		    "pwm_sel", 19),
 	GATE_INFRA0(CLK_INFRA_PWM, "infra_pwm",
 		    "pwm_sel", 21),
+	GATE_INFRA0(CLK_INFRA_UART0, "infra_uart0",
+		    "uart_sel", 22),
 	GATE_INFRA0(CLK_INFRA_UART1, "infra_uart1",
 		    "uart_sel", 23),
 	GATE_INFRA0(CLK_INFRA_UART2, "infra_uart2",
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 16+ messages in thread

* Re: [PATCH v10 1/3] dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC
  2020-07-30 13:30 ` [PATCH v10 1/3] dt-bindings: pinctrl: add bindings for MediaTek " Hanks Chen
@ 2020-07-31 18:26   ` Rob Herring
  2020-08-03 23:31   ` Linus Walleij
  1 sibling, 0 replies; 16+ messages in thread
From: Rob Herring @ 2020-07-31 18:26 UTC (permalink / raw)
  To: Hanks Chen
  Cc: devicetree, CC Hwang, Stephen Boyd, YueHaibing,
	Michael Turquette, Loda Chou, linux-kernel, linux-clk,
	linux-gpio, Rob Herring, linux-mediatek, Andy Teng,
	Matthias Brugger, mtk01761, Linus Walleij, linux-arm-kernel

On Thu, 30 Jul 2020 21:30:14 +0800, Hanks Chen wrote:
> From: Andy Teng <andy.teng@mediatek.com>
> 
> Add devicetree bindings for MediaTek MT6779 pinctrl driver.
> 
> Signed-off-by: Andy Teng <andy.teng@mediatek.com>
> Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
> ---
>  .../pinctrl/mediatek,mt6779-pinctrl.yaml      | 202 ++++++++++++++++++
>  1 file changed, 202 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v10 1/3] dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC
  2020-07-30 13:30 ` [PATCH v10 1/3] dt-bindings: pinctrl: add bindings for MediaTek " Hanks Chen
  2020-07-31 18:26   ` Rob Herring
@ 2020-08-03 23:31   ` Linus Walleij
  1 sibling, 0 replies; 16+ messages in thread
From: Linus Walleij @ 2020-08-03 23:31 UTC (permalink / raw)
  To: Hanks Chen
  Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	CC Hwang, Stephen Boyd, Andy Teng, Michael Turquette, YueHaibing,
	linux-kernel, open list:GPIO SUBSYSTEM, Rob Herring,
	moderated list:ARM/Mediatek SoC support, Loda Chou,
	Matthias Brugger, mtk01761, linux-clk, Linux ARM

On Thu, Jul 30, 2020 at 3:30 PM Hanks Chen <hanks.chen@mediatek.com> wrote:

> From: Andy Teng <andy.teng@mediatek.com>
>
> Add devicetree bindings for MediaTek MT6779 pinctrl driver.
>
> Signed-off-by: Andy Teng <andy.teng@mediatek.com>
> Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>

I pulled out the v9 version of this patch and applied v10 instead.

Yours,
Linus Walleij

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v10 2/3] arm64: dts: add dts nodes for MT6779
  2020-07-30 13:30 ` [PATCH v10 2/3] arm64: dts: add dts nodes for MT6779 Hanks Chen
@ 2020-08-05  2:24   ` Hanks Chen
  2020-08-27  8:20     ` Matthias Brugger
  2020-10-09 12:30   ` Matthias Brugger
  1 sibling, 1 reply; 16+ messages in thread
From: Hanks Chen @ 2020-08-05  2:24 UTC (permalink / raw)
  To: Linus Walleij, Matthias Brugger
  Cc: devicetree, CC Hwang, Stephen Boyd, Andy Teng, Michael Turquette,
	YueHaibing, linux-kernel, linux-gpio, Rob Herring,
	linux-mediatek, Loda Chou, Matthias Brugger, mtk01761, linux-clk,
	linux-arm-kernel

Hi Matthias and all,

Gentle ping on this patch.

Thanks


Hanks Chen

On Thu, 2020-07-30 at 21:30 +0800, Hanks Chen wrote:
> this adds initial MT6779 dts settings for board support,
> including cpu, gic, timer, ccf, pinctrl, uart, sysirq...etc.
> 
> Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
> ---
>  arch/arm64/boot/dts/mediatek/Makefile       |   1 +
>  arch/arm64/boot/dts/mediatek/mt6779-evb.dts |  31 +++
>  arch/arm64/boot/dts/mediatek/mt6779.dtsi    | 271 ++++++++++++++++++++
>  3 files changed, 303 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt6779-evb.dts
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt6779.dtsi
> 
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index a57af9da9f5c..4d1b0f9d8d1c 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -1,6 +1,7 @@
>  # SPDX-License-Identifier: GPL-2.0
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6779-evb.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
> new file mode 100644
> index 000000000000..164f5cbb3821
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
> @@ -0,0 +1,31 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
> + * Author: Mars.C <mars.cheng@mediatek.com>
> + *
> + */
> +
> +/dts-v1/;
> +#include "mt6779.dtsi"
> +
> +/ {
> +	model = "MediaTek MT6779 EVB";
> +	compatible = "mediatek,mt6779-evb", "mediatek,mt6779";
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	memory@40000000 {
> +		device_type = "memory";
> +		reg = <0 0x40000000 0 0x1e800000>;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:921600n8";
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
> new file mode 100644
> index 000000000000..370f309d32de
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
> @@ -0,0 +1,271 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
> + * Author: Mars.C <mars.cheng@mediatek.com>
> + *
> + */
> +
> +#include <dt-bindings/clock/mt6779-clk.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/pinctrl/mt6779-pinfunc.h>
> +
> +/ {
> +	compatible = "mediatek,mt6779";
> +	interrupt-parent = <&sysirq>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	psci {
> +		compatible = "arm,psci-0.2";
> +		method = "smc";
> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			enable-method = "psci";
> +			reg = <0x000>;
> +		};
> +
> +		cpu1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			enable-method = "psci";
> +			reg = <0x100>;
> +		};
> +
> +		cpu2: cpu@2 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			enable-method = "psci";
> +			reg = <0x200>;
> +		};
> +
> +		cpu3: cpu@3 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			enable-method = "psci";
> +			reg = <0x300>;
> +		};
> +
> +		cpu4: cpu@4 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			enable-method = "psci";
> +			reg = <0x400>;
> +		};
> +
> +		cpu5: cpu@5 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			enable-method = "psci";
> +			reg = <0x500>;
> +		};
> +
> +		cpu6: cpu@6 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a75";
> +			enable-method = "psci";
> +			reg = <0x600>;
> +		};
> +
> +		cpu7: cpu@7 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a75";
> +			enable-method = "psci";
> +			reg = <0x700>;
> +		};
> +	};
> +
> +	pmu {
> +		compatible = "arm,armv8-pmuv3";
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW 0>;
> +	};
> +
> +	clk26m: oscillator@0 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <26000000>;
> +		clock-output-names = "clk26m";
> +	};
> +
> +	clk32k: oscillator@1 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <32768>;
> +		clock-output-names = "clk32k";
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
> +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
> +	};
> +
> +	soc {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		compatible = "simple-bus";
> +		ranges;
> +
> +		gic: interrupt-controller@0c000000 {
> +			compatible = "arm,gic-v3";
> +			#interrupt-cells = <4>;
> +			interrupt-parent = <&gic>;
> +			interrupt-controller;
> +			reg = <0 0x0c000000 0 0x40000>,  /* GICD */
> +			      <0 0x0c040000 0 0x200000>; /* GICR */
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
> +
> +			ppi-partitions {
> +				ppi_cluster0: interrupt-partition-0 {
> +					affinity = <&cpu0 &cpu1 \
> +						&cpu2 &cpu3 &cpu4 &cpu5>;
> +				};
> +				ppi_cluster1: interrupt-partition-1 {
> +					affinity = <&cpu6 &cpu7>;
> +				};
> +			};
> +
> +		};
> +
> +		sysirq: intpol-controller@0c53a650 {
> +			compatible = "mediatek,mt6779-sysirq",
> +				     "mediatek,mt6577-sysirq";
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			interrupt-parent = <&gic>;
> +			reg = <0 0x0c53a650 0 0x50>;
> +		};
> +
> +		topckgen: clock-controller@10000000 {
> +			compatible = "mediatek,mt6779-topckgen", "syscon";
> +			reg = <0 0x10000000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		infracfg_ao: clock-controller@10001000 {
> +			compatible = "mediatek,mt6779-infracfg_ao", "syscon";
> +			reg = <0 0x10001000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		pio: pinctrl@10005000 {
> +			compatible = "mediatek,mt6779-pinctrl", "syscon";
> +			reg = <0 0x10005000 0 0x1000>,
> +			      <0 0x11c20000 0 0x1000>,
> +			      <0 0x11d10000 0 0x1000>,
> +			      <0 0x11e20000 0 0x1000>,
> +			      <0 0x11e70000 0 0x1000>,
> +			      <0 0x11ea0000 0 0x1000>,
> +			      <0 0x11f20000 0 0x1000>,
> +			      <0 0x11f30000 0 0x1000>,
> +			      <0 0x1000b000 0 0x1000>;
> +			reg-names = "gpio", "iocfg_rm",
> +				    "iocfg_br", "iocfg_lm",
> +				    "iocfg_lb", "iocfg_rt",
> +				    "iocfg_lt", "iocfg_tl",
> +				    "eint";
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&pio 0 0 210>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
> +		};
> +
> +		apmixed: clock-controller@1000c000 {
> +			compatible = "mediatek,mt6779-apmixed", "syscon";
> +			reg = <0 0x1000c000 0 0xe00>;
> +			#clock-cells = <1>;
> +		};
> +
> +		uart0: serial@11002000 {
> +			compatible = "mediatek,mt6779-uart",
> +				     "mediatek,mt6577-uart";
> +			reg = <0 0x11002000 0 0x400>;
> +			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART0>;
> +			clock-names = "baud", "bus";
> +			status = "disabled";
> +		};
> +
> +		uart1: serial@11003000 {
> +			compatible = "mediatek,mt6779-uart",
> +				     "mediatek,mt6577-uart";
> +			reg = <0 0x11003000 0 0x400>;
> +			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART1>;
> +			clock-names = "baud", "bus";
> +			status = "disabled";
> +		};
> +
> +		uart2: serial@11004000 {
> +			compatible = "mediatek,mt6779-uart",
> +				     "mediatek,mt6577-uart";
> +			reg = <0 0x11004000 0 0x400>;
> +			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART2>;
> +			clock-names = "baud", "bus";
> +			status = "disabled";
> +		};
> +
> +		audio: clock-controller@11210000 {
> +			compatible = "mediatek,mt6779-audio", "syscon";
> +			reg = <0 0x11210000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		mfgcfg: clock-controller@13fbf000 {
> +			compatible = "mediatek,mt6779-mfgcfg", "syscon";
> +			reg = <0 0x13fbf000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		mmsys: syscon@14000000 {
> +			compatible = "mediatek,mt6779-mmsys", "syscon";
> +			reg = <0 0x14000000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		imgsys: clock-controller@15020000 {
> +			compatible = "mediatek,mt6779-imgsys", "syscon";
> +			reg = <0 0x15020000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		vdecsys: clock-controller@16000000 {
> +			compatible = "mediatek,mt6779-vdecsys", "syscon";
> +			reg = <0 0x16000000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		vencsys: clock-controller@17000000 {
> +			compatible = "mediatek,mt6779-vencsys", "syscon";
> +			reg = <0 0x17000000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		camsys: clock-controller@1a000000 {
> +			compatible = "mediatek,mt6779-camsys", "syscon";
> +			reg = <0 0x1a000000 0 0x10000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		ipesys: clock-controller@1b000000 {
> +			compatible = "mediatek,mt6779-ipesys", "syscon";
> +			reg = <0 0x1b000000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +	};
> +};

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v10 2/3] arm64: dts: add dts nodes for MT6779
  2020-08-05  2:24   ` Hanks Chen
@ 2020-08-27  8:20     ` Matthias Brugger
  0 siblings, 0 replies; 16+ messages in thread
From: Matthias Brugger @ 2020-08-27  8:20 UTC (permalink / raw)
  To: Hanks Chen, Linus Walleij
  Cc: devicetree, CC Hwang, Stephen Boyd, Andy Teng, Michael Turquette,
	YueHaibing, linux-kernel, linux-gpio, Rob Herring,
	linux-mediatek, Loda Chou, mtk01761, linux-clk, linux-arm-kernel



On 05/08/2020 04:24, Hanks Chen wrote:
> Hi Matthias and all,
> 
> Gentle ping on this patch.
> 

I'm fine with the patch. I'm waiting on the clk part to be accepted, then I'll 
take this one.

Regards,
Matthias

> Thanks
> 
> 
> Hanks Chen
> 
> On Thu, 2020-07-30 at 21:30 +0800, Hanks Chen wrote:
>> this adds initial MT6779 dts settings for board support,
>> including cpu, gic, timer, ccf, pinctrl, uart, sysirq...etc.
>>
>> Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
>> ---
>>   arch/arm64/boot/dts/mediatek/Makefile       |   1 +
>>   arch/arm64/boot/dts/mediatek/mt6779-evb.dts |  31 +++
>>   arch/arm64/boot/dts/mediatek/mt6779.dtsi    | 271 ++++++++++++++++++++
>>   3 files changed, 303 insertions(+)
>>   create mode 100644 arch/arm64/boot/dts/mediatek/mt6779-evb.dts
>>   create mode 100644 arch/arm64/boot/dts/mediatek/mt6779.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
>> index a57af9da9f5c..4d1b0f9d8d1c 100644
>> --- a/arch/arm64/boot/dts/mediatek/Makefile
>> +++ b/arch/arm64/boot/dts/mediatek/Makefile
>> @@ -1,6 +1,7 @@
>>   # SPDX-License-Identifier: GPL-2.0
>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6779-evb.dtb
>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
>> diff --git a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
>> new file mode 100644
>> index 000000000000..164f5cbb3821
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
>> @@ -0,0 +1,31 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Copyright (c) 2019 MediaTek Inc.
>> + * Author: Mars.C <mars.cheng@mediatek.com>
>> + *
>> + */
>> +
>> +/dts-v1/;
>> +#include "mt6779.dtsi"
>> +
>> +/ {
>> +	model = "MediaTek MT6779 EVB";
>> +	compatible = "mediatek,mt6779-evb", "mediatek,mt6779";
>> +
>> +	aliases {
>> +		serial0 = &uart0;
>> +	};
>> +
>> +	memory@40000000 {
>> +		device_type = "memory";
>> +		reg = <0 0x40000000 0 0x1e800000>;
>> +	};
>> +
>> +	chosen {
>> +		stdout-path = "serial0:921600n8";
>> +	};
>> +};
>> +
>> +&uart0 {
>> +	status = "okay";
>> +};
>> diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
>> new file mode 100644
>> index 000000000000..370f309d32de
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
>> @@ -0,0 +1,271 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Copyright (c) 2019 MediaTek Inc.
>> + * Author: Mars.C <mars.cheng@mediatek.com>
>> + *
>> + */
>> +
>> +#include <dt-bindings/clock/mt6779-clk.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/pinctrl/mt6779-pinfunc.h>
>> +
>> +/ {
>> +	compatible = "mediatek,mt6779";
>> +	interrupt-parent = <&sysirq>;
>> +	#address-cells = <2>;
>> +	#size-cells = <2>;
>> +
>> +	psci {
>> +		compatible = "arm,psci-0.2";
>> +		method = "smc";
>> +	};
>> +
>> +	cpus {
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +
>> +		cpu0: cpu@0 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			enable-method = "psci";
>> +			reg = <0x000>;
>> +		};
>> +
>> +		cpu1: cpu@1 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			enable-method = "psci";
>> +			reg = <0x100>;
>> +		};
>> +
>> +		cpu2: cpu@2 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			enable-method = "psci";
>> +			reg = <0x200>;
>> +		};
>> +
>> +		cpu3: cpu@3 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			enable-method = "psci";
>> +			reg = <0x300>;
>> +		};
>> +
>> +		cpu4: cpu@4 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			enable-method = "psci";
>> +			reg = <0x400>;
>> +		};
>> +
>> +		cpu5: cpu@5 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a55";
>> +			enable-method = "psci";
>> +			reg = <0x500>;
>> +		};
>> +
>> +		cpu6: cpu@6 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a75";
>> +			enable-method = "psci";
>> +			reg = <0x600>;
>> +		};
>> +
>> +		cpu7: cpu@7 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a75";
>> +			enable-method = "psci";
>> +			reg = <0x700>;
>> +		};
>> +	};
>> +
>> +	pmu {
>> +		compatible = "arm,armv8-pmuv3";
>> +		interrupt-parent = <&gic>;
>> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW 0>;
>> +	};
>> +
>> +	clk26m: oscillator@0 {
>> +		compatible = "fixed-clock";
>> +		#clock-cells = <0>;
>> +		clock-frequency = <26000000>;
>> +		clock-output-names = "clk26m";
>> +	};
>> +
>> +	clk32k: oscillator@1 {
>> +		compatible = "fixed-clock";
>> +		#clock-cells = <0>;
>> +		clock-frequency = <32768>;
>> +		clock-output-names = "clk32k";
>> +	};
>> +
>> +	timer {
>> +		compatible = "arm,armv8-timer";
>> +		interrupt-parent = <&gic>;
>> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
>> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
>> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
>> +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
>> +	};
>> +
>> +	soc {
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		compatible = "simple-bus";
>> +		ranges;
>> +
>> +		gic: interrupt-controller@0c000000 {
>> +			compatible = "arm,gic-v3";
>> +			#interrupt-cells = <4>;
>> +			interrupt-parent = <&gic>;
>> +			interrupt-controller;
>> +			reg = <0 0x0c000000 0 0x40000>,  /* GICD */
>> +			      <0 0x0c040000 0 0x200000>; /* GICR */
>> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
>> +
>> +			ppi-partitions {
>> +				ppi_cluster0: interrupt-partition-0 {
>> +					affinity = <&cpu0 &cpu1 \
>> +						&cpu2 &cpu3 &cpu4 &cpu5>;
>> +				};
>> +				ppi_cluster1: interrupt-partition-1 {
>> +					affinity = <&cpu6 &cpu7>;
>> +				};
>> +			};
>> +
>> +		};
>> +
>> +		sysirq: intpol-controller@0c53a650 {
>> +			compatible = "mediatek,mt6779-sysirq",
>> +				     "mediatek,mt6577-sysirq";
>> +			interrupt-controller;
>> +			#interrupt-cells = <3>;
>> +			interrupt-parent = <&gic>;
>> +			reg = <0 0x0c53a650 0 0x50>;
>> +		};
>> +
>> +		topckgen: clock-controller@10000000 {
>> +			compatible = "mediatek,mt6779-topckgen", "syscon";
>> +			reg = <0 0x10000000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		infracfg_ao: clock-controller@10001000 {
>> +			compatible = "mediatek,mt6779-infracfg_ao", "syscon";
>> +			reg = <0 0x10001000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		pio: pinctrl@10005000 {
>> +			compatible = "mediatek,mt6779-pinctrl", "syscon";
>> +			reg = <0 0x10005000 0 0x1000>,
>> +			      <0 0x11c20000 0 0x1000>,
>> +			      <0 0x11d10000 0 0x1000>,
>> +			      <0 0x11e20000 0 0x1000>,
>> +			      <0 0x11e70000 0 0x1000>,
>> +			      <0 0x11ea0000 0 0x1000>,
>> +			      <0 0x11f20000 0 0x1000>,
>> +			      <0 0x11f30000 0 0x1000>,
>> +			      <0 0x1000b000 0 0x1000>;
>> +			reg-names = "gpio", "iocfg_rm",
>> +				    "iocfg_br", "iocfg_lm",
>> +				    "iocfg_lb", "iocfg_rt",
>> +				    "iocfg_lt", "iocfg_tl",
>> +				    "eint";
>> +			gpio-controller;
>> +			#gpio-cells = <2>;
>> +			gpio-ranges = <&pio 0 0 210>;
>> +			interrupt-controller;
>> +			#interrupt-cells = <2>;
>> +			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
>> +		};
>> +
>> +		apmixed: clock-controller@1000c000 {
>> +			compatible = "mediatek,mt6779-apmixed", "syscon";
>> +			reg = <0 0x1000c000 0 0xe00>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		uart0: serial@11002000 {
>> +			compatible = "mediatek,mt6779-uart",
>> +				     "mediatek,mt6577-uart";
>> +			reg = <0 0x11002000 0 0x400>;
>> +			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
>> +			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART0>;
>> +			clock-names = "baud", "bus";
>> +			status = "disabled";
>> +		};
>> +
>> +		uart1: serial@11003000 {
>> +			compatible = "mediatek,mt6779-uart",
>> +				     "mediatek,mt6577-uart";
>> +			reg = <0 0x11003000 0 0x400>;
>> +			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_LOW>;
>> +			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART1>;
>> +			clock-names = "baud", "bus";
>> +			status = "disabled";
>> +		};
>> +
>> +		uart2: serial@11004000 {
>> +			compatible = "mediatek,mt6779-uart",
>> +				     "mediatek,mt6577-uart";
>> +			reg = <0 0x11004000 0 0x400>;
>> +			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_LOW>;
>> +			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART2>;
>> +			clock-names = "baud", "bus";
>> +			status = "disabled";
>> +		};
>> +
>> +		audio: clock-controller@11210000 {
>> +			compatible = "mediatek,mt6779-audio", "syscon";
>> +			reg = <0 0x11210000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		mfgcfg: clock-controller@13fbf000 {
>> +			compatible = "mediatek,mt6779-mfgcfg", "syscon";
>> +			reg = <0 0x13fbf000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		mmsys: syscon@14000000 {
>> +			compatible = "mediatek,mt6779-mmsys", "syscon";
>> +			reg = <0 0x14000000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		imgsys: clock-controller@15020000 {
>> +			compatible = "mediatek,mt6779-imgsys", "syscon";
>> +			reg = <0 0x15020000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		vdecsys: clock-controller@16000000 {
>> +			compatible = "mediatek,mt6779-vdecsys", "syscon";
>> +			reg = <0 0x16000000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		vencsys: clock-controller@17000000 {
>> +			compatible = "mediatek,mt6779-vencsys", "syscon";
>> +			reg = <0 0x17000000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		camsys: clock-controller@1a000000 {
>> +			compatible = "mediatek,mt6779-camsys", "syscon";
>> +			reg = <0 0x1a000000 0 0x10000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +		ipesys: clock-controller@1b000000 {
>> +			compatible = "mediatek,mt6779-ipesys", "syscon";
>> +			reg = <0 0x1b000000 0 0x1000>;
>> +			#clock-cells = <1>;
>> +		};
>> +
>> +	};
>> +};
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v10 3/3] clk: mediatek: add UART0 clock support
  2020-07-30 13:30 ` [PATCH v10 3/3] clk: mediatek: add UART0 clock support Hanks Chen
@ 2020-09-08  6:25   ` Hanks Chen
  2020-10-03 10:06     ` Hanks Chen
  2020-10-08 21:45   ` Stephen Boyd
  1 sibling, 1 reply; 16+ messages in thread
From: Hanks Chen @ 2020-09-08  6:25 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Matthias Brugger
  Cc: devicetree, CC Hwang, Stephen Boyd, Andy Teng, Linus Walleij,
	YueHaibing, linux-kernel, linux-clk, linux-gpio, Rob Herring,
	linux-mediatek, Loda Chou, Matthias Brugger, mtk01761,
	Michael Turquette, linux-arm-kernel

Hi all,

Gentle ping on this patch.

Thanks


Hanks Chen


On Thu, 2020-07-30 at 21:30 +0800, Hanks Chen wrote:
> Add MT6779 UART0 clock support.
> 
> Fixes: 710774e04861 ("clk: mediatek: Add MT6779 clock support")
> Signed-off-by: Wendell Lin <wendell.lin@mediatek.com>
> Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> ---
>  drivers/clk/mediatek/clk-mt6779.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/clk/mediatek/clk-mt6779.c b/drivers/clk/mediatek/clk-mt6779.c
> index 9766cccf5844..6e0d3a166729 100644
> --- a/drivers/clk/mediatek/clk-mt6779.c
> +++ b/drivers/clk/mediatek/clk-mt6779.c
> @@ -919,6 +919,8 @@ static const struct mtk_gate infra_clks[] = {
>  		    "pwm_sel", 19),
>  	GATE_INFRA0(CLK_INFRA_PWM, "infra_pwm",
>  		    "pwm_sel", 21),
> +	GATE_INFRA0(CLK_INFRA_UART0, "infra_uart0",
> +		    "uart_sel", 22),
>  	GATE_INFRA0(CLK_INFRA_UART1, "infra_uart1",
>  		    "uart_sel", 23),
>  	GATE_INFRA0(CLK_INFRA_UART2, "infra_uart2",

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v10 3/3] clk: mediatek: add UART0 clock support
  2020-09-08  6:25   ` Hanks Chen
@ 2020-10-03 10:06     ` Hanks Chen
  2020-10-08  2:00       ` Stephen Boyd
  0 siblings, 1 reply; 16+ messages in thread
From: Hanks Chen @ 2020-10-03 10:06 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd
  Cc: devicetree, CC Hwang, Andy Teng, Linus Walleij, YueHaibing,
	linux-kernel, linux-gpio, Rob Herring, linux-mediatek, Loda Chou,
	Matthias Brugger, mtk01761, linux-clk, linux-arm-kernel

Hi Michael & Stephen,

Please kindly let me know your comments about this patch.
Thanks

Regards,
Hanks


On Tue, 2020-09-08 at 14:25 +0800, Hanks Chen wrote:
> Hi all,
> 
> Gentle ping on this patch.
> 
> Thanks
> 
> 
> Hanks Chen
> 
> 
> On Thu, 2020-07-30 at 21:30 +0800, Hanks Chen wrote:
> > Add MT6779 UART0 clock support.
> > 
> > Fixes: 710774e04861 ("clk: mediatek: Add MT6779 clock support")
> > Signed-off-by: Wendell Lin <wendell.lin@mediatek.com>
> > Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
> > Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> > ---
> >  drivers/clk/mediatek/clk-mt6779.c | 2 ++
> >  1 file changed, 2 insertions(+)
> > 
> > diff --git a/drivers/clk/mediatek/clk-mt6779.c b/drivers/clk/mediatek/clk-mt6779.c
> > index 9766cccf5844..6e0d3a166729 100644
> > --- a/drivers/clk/mediatek/clk-mt6779.c
> > +++ b/drivers/clk/mediatek/clk-mt6779.c
> > @@ -919,6 +919,8 @@ static const struct mtk_gate infra_clks[] = {
> >  		    "pwm_sel", 19),
> >  	GATE_INFRA0(CLK_INFRA_PWM, "infra_pwm",
> >  		    "pwm_sel", 21),
> > +	GATE_INFRA0(CLK_INFRA_UART0, "infra_uart0",
> > +		    "uart_sel", 22),
> >  	GATE_INFRA0(CLK_INFRA_UART1, "infra_uart1",
> >  		    "uart_sel", 23),
> >  	GATE_INFRA0(CLK_INFRA_UART2, "infra_uart2",
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v10 3/3] clk: mediatek: add UART0 clock support
  2020-10-03 10:06     ` Hanks Chen
@ 2020-10-08  2:00       ` Stephen Boyd
  2020-10-08  2:39         ` Hanks Chen
  2020-10-08  7:25         ` Matthias Brugger
  0 siblings, 2 replies; 16+ messages in thread
From: Stephen Boyd @ 2020-10-08  2:00 UTC (permalink / raw)
  To: Hanks Chen, Michael Turquette
  Cc: devicetree, CC Hwang, Andy Teng, Linus Walleij, YueHaibing,
	linux-kernel, linux-gpio, Rob Herring, linux-mediatek, Loda Chou,
	Matthias Brugger, mtk01761, linux-clk, linux-arm-kernel

Quoting Hanks Chen (2020-10-03 03:06:47)
> Hi Michael & Stephen,
> 
> Please kindly let me know your comments about this patch.
> Thanks
> 

What's the base for this patch? I tried applying to v5.9-rc1 and it
didn't work.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v10 3/3] clk: mediatek: add UART0 clock support
  2020-10-08  2:00       ` Stephen Boyd
@ 2020-10-08  2:39         ` Hanks Chen
  2020-10-08 21:45           ` Stephen Boyd
  2020-10-08  7:25         ` Matthias Brugger
  1 sibling, 1 reply; 16+ messages in thread
From: Hanks Chen @ 2020-10-08  2:39 UTC (permalink / raw)
  To: Stephen Boyd
  Cc: devicetree, CC Hwang, Andy Teng, Michael Turquette, YueHaibing,
	linux-kernel, linux-clk, linux-gpio, Rob Herring, linux-mediatek,
	Loda Chou, Matthias Brugger, mtk01761, Linus Walleij,
	linux-arm-kernel

On Wed, 2020-10-07 at 19:00 -0700, Stephen Boyd wrote:
> Quoting Hanks Chen (2020-10-03 03:06:47)
> > Hi Michael & Stephen,
> > 
> > Please kindly let me know your comments about this patch.
> > Thanks
> > 
> 
> What's the base for this patch? I tried applying to v5.9-rc1 and it
> didn't work.

Sorry, what does that mean?

Do you have encountered a merged conflict or run time failed?

I based on kernel-5.8-rc1 to add it and it can boot to kernel shell.

Thanks!


Hanks Chen
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v10 3/3] clk: mediatek: add UART0 clock support
  2020-10-08  2:00       ` Stephen Boyd
  2020-10-08  2:39         ` Hanks Chen
@ 2020-10-08  7:25         ` Matthias Brugger
  1 sibling, 0 replies; 16+ messages in thread
From: Matthias Brugger @ 2020-10-08  7:25 UTC (permalink / raw)
  To: Stephen Boyd, Hanks Chen, Michael Turquette
  Cc: devicetree, CC Hwang, Andy Teng, Linus Walleij, YueHaibing,
	linux-kernel, linux-gpio, Rob Herring, linux-mediatek, Loda Chou,
	mtk01761, linux-clk, linux-arm-kernel

Hi Stephen,

On 08/10/2020 04:00, Stephen Boyd wrote:
> Quoting Hanks Chen (2020-10-03 03:06:47)
>> Hi Michael & Stephen,
>>
>> Please kindly let me know your comments about this patch.
>> Thanks
>>
> 
> What's the base for this patch? I tried applying to v5.9-rc1 and it
> didn't work.
> 

Can you please double check. The file the patch touches didn't get touched since 
v5.5-rc1. I tried to apply it and it didn't give me any error. I paste my way of 
applying patches just in case:

b4.sh am -l -o /tmp -n patch -P 3 
1596115816-11758-4-git-send-email-hanks.chen@mediatek.com && git am -3 -s 
/tmp/patch.mbx

Regards,
Matthias

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v10 3/3] clk: mediatek: add UART0 clock support
  2020-10-08  2:39         ` Hanks Chen
@ 2020-10-08 21:45           ` Stephen Boyd
  0 siblings, 0 replies; 16+ messages in thread
From: Stephen Boyd @ 2020-10-08 21:45 UTC (permalink / raw)
  To: Hanks Chen
  Cc: devicetree, CC Hwang, Andy Teng, Michael Turquette, YueHaibing,
	linux-kernel, linux-clk, linux-gpio, Rob Herring, linux-mediatek,
	Loda Chou, Matthias Brugger, mtk01761, Linus Walleij,
	linux-arm-kernel

Quoting Hanks Chen (2020-10-07 19:39:13)
> On Wed, 2020-10-07 at 19:00 -0700, Stephen Boyd wrote:
> > Quoting Hanks Chen (2020-10-03 03:06:47)
> > > Hi Michael & Stephen,
> > > 
> > > Please kindly let me know your comments about this patch.
> > > Thanks
> > > 
> > 
> > What's the base for this patch? I tried applying to v5.9-rc1 and it
> > didn't work.
> 
> Sorry, what does that mean?
> 
> Do you have encountered a merged conflict or run time failed?
> 
> I based on kernel-5.8-rc1 to add it and it can boot to kernel shell.
> 

Ah I see what it is. The email isn't actually plain text, it is base64
encoded and so git am gets confused by the CRLF line endings that are
encoded in there. Any chance you can send patches in actual plain text
format in the future?

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v10 3/3] clk: mediatek: add UART0 clock support
  2020-07-30 13:30 ` [PATCH v10 3/3] clk: mediatek: add UART0 clock support Hanks Chen
  2020-09-08  6:25   ` Hanks Chen
@ 2020-10-08 21:45   ` Stephen Boyd
  1 sibling, 0 replies; 16+ messages in thread
From: Stephen Boyd @ 2020-10-08 21:45 UTC (permalink / raw)
  To: Hanks Chen, Linus Walleij, Matthias Brugger, Michael Turquette,
	Rob Herring
  Cc: devicetree, CC Hwang, Andy Teng, Hanks Chen, YueHaibing,
	linux-kernel, linux-gpio, linux-mediatek, Loda Chou, mtk01761,
	linux-clk, linux-arm-kernel

Quoting Hanks Chen (2020-07-30 06:30:16)
> Add MT6779 UART0 clock support.
> 
> Fixes: 710774e04861 ("clk: mediatek: Add MT6779 clock support")
> Signed-off-by: Wendell Lin <wendell.lin@mediatek.com>
> Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> ---

Applied to clk-next

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH v10 2/3] arm64: dts: add dts nodes for MT6779
  2020-07-30 13:30 ` [PATCH v10 2/3] arm64: dts: add dts nodes for MT6779 Hanks Chen
  2020-08-05  2:24   ` Hanks Chen
@ 2020-10-09 12:30   ` Matthias Brugger
  1 sibling, 0 replies; 16+ messages in thread
From: Matthias Brugger @ 2020-10-09 12:30 UTC (permalink / raw)
  To: Hanks Chen, Linus Walleij, Rob Herring, Michael Turquette, Stephen Boyd
  Cc: devicetree, CC Hwang, Andy Teng, YueHaibing, linux-kernel,
	linux-gpio, linux-mediatek, Loda Chou, mtk01761, linux-clk,
	linux-arm-kernel



On 30/07/2020 15:30, Hanks Chen wrote:
> this adds initial MT6779 dts settings for board support,
> including cpu, gic, timer, ccf, pinctrl, uart, sysirq...etc.
> 
> Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
> ---
>   arch/arm64/boot/dts/mediatek/Makefile       |   1 +
>   arch/arm64/boot/dts/mediatek/mt6779-evb.dts |  31 +++
>   arch/arm64/boot/dts/mediatek/mt6779.dtsi    | 271 ++++++++++++++++++++
>   3 files changed, 303 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt6779-evb.dts
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt6779.dtsi
> 
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index a57af9da9f5c..4d1b0f9d8d1c 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -1,6 +1,7 @@
>   # SPDX-License-Identifier: GPL-2.0
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6779-evb.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
> new file mode 100644
> index 000000000000..164f5cbb3821
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
> @@ -0,0 +1,31 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
> + * Author: Mars.C <mars.cheng@mediatek.com>
> + *
> + */
> +
> +/dts-v1/;
> +#include "mt6779.dtsi"
> +
> +/ {
> +	model = "MediaTek MT6779 EVB";
> +	compatible = "mediatek,mt6779-evb", "mediatek,mt6779";
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	memory@40000000 {
> +		device_type = "memory";
> +		reg = <0 0x40000000 0 0x1e800000>;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:921600n8";
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
> new file mode 100644
> index 000000000000..370f309d32de
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
> @@ -0,0 +1,271 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
> + * Author: Mars.C <mars.cheng@mediatek.com>
> + *
> + */
> +
> +#include <dt-bindings/clock/mt6779-clk.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/pinctrl/mt6779-pinfunc.h>
> +
> +/ {
> +	compatible = "mediatek,mt6779";
> +	interrupt-parent = <&sysirq>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	psci {
> +		compatible = "arm,psci-0.2";
> +		method = "smc";
> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			enable-method = "psci";
> +			reg = <0x000>;
> +		};
> +
> +		cpu1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			enable-method = "psci";
> +			reg = <0x100>;
> +		};
> +
> +		cpu2: cpu@2 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			enable-method = "psci";
> +			reg = <0x200>;
> +		};
> +
> +		cpu3: cpu@3 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			enable-method = "psci";
> +			reg = <0x300>;
> +		};
> +
> +		cpu4: cpu@4 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			enable-method = "psci";
> +			reg = <0x400>;
> +		};
> +
> +		cpu5: cpu@5 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			enable-method = "psci";
> +			reg = <0x500>;
> +		};
> +
> +		cpu6: cpu@6 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a75";
> +			enable-method = "psci";
> +			reg = <0x600>;
> +		};
> +
> +		cpu7: cpu@7 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a75";
> +			enable-method = "psci";
> +			reg = <0x700>;
> +		};
> +	};
> +
> +	pmu {
> +		compatible = "arm,armv8-pmuv3";
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW 0>;
> +	};
> +
> +	clk26m: oscillator@0 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <26000000>;
> +		clock-output-names = "clk26m";
> +	};
> +
> +	clk32k: oscillator@1 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <32768>;
> +		clock-output-names = "clk32k";
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
> +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
> +	};
> +
> +	soc {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		compatible = "simple-bus";
> +		ranges;
> +
> +		gic: interrupt-controller@0c000000 {
> +			compatible = "arm,gic-v3";
> +			#interrupt-cells = <4>;
> +			interrupt-parent = <&gic>;
> +			interrupt-controller;
> +			reg = <0 0x0c000000 0 0x40000>,  /* GICD */
> +			      <0 0x0c040000 0 0x200000>; /* GICR */
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
> +
> +			ppi-partitions {
> +				ppi_cluster0: interrupt-partition-0 {
> +					affinity = <&cpu0 &cpu1 \
> +						&cpu2 &cpu3 &cpu4 &cpu5>;
> +				};
> +				ppi_cluster1: interrupt-partition-1 {
> +					affinity = <&cpu6 &cpu7>;
> +				};
> +			};
> +
> +		};
> +
> +		sysirq: intpol-controller@0c53a650 {
> +			compatible = "mediatek,mt6779-sysirq",
> +				     "mediatek,mt6577-sysirq";
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			interrupt-parent = <&gic>;
> +			reg = <0 0x0c53a650 0 0x50>;

This looks a bit suspicious to me. Unfortunately I'm not able to find any 
reference in the datasheets.

Anyway, patch now applied to v5.10-tmp/dts64

Thanks!
Matthias

> +		};
> +
> +		topckgen: clock-controller@10000000 {
> +			compatible = "mediatek,mt6779-topckgen", "syscon";
> +			reg = <0 0x10000000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		infracfg_ao: clock-controller@10001000 {
> +			compatible = "mediatek,mt6779-infracfg_ao", "syscon";
> +			reg = <0 0x10001000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		pio: pinctrl@10005000 {
> +			compatible = "mediatek,mt6779-pinctrl", "syscon";
> +			reg = <0 0x10005000 0 0x1000>,
> +			      <0 0x11c20000 0 0x1000>,
> +			      <0 0x11d10000 0 0x1000>,
> +			      <0 0x11e20000 0 0x1000>,
> +			      <0 0x11e70000 0 0x1000>,
> +			      <0 0x11ea0000 0 0x1000>,
> +			      <0 0x11f20000 0 0x1000>,
> +			      <0 0x11f30000 0 0x1000>,
> +			      <0 0x1000b000 0 0x1000>;
> +			reg-names = "gpio", "iocfg_rm",
> +				    "iocfg_br", "iocfg_lm",
> +				    "iocfg_lb", "iocfg_rt",
> +				    "iocfg_lt", "iocfg_tl",
> +				    "eint";
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			gpio-ranges = <&pio 0 0 210>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
> +		};
> +
> +		apmixed: clock-controller@1000c000 {
> +			compatible = "mediatek,mt6779-apmixed", "syscon";
> +			reg = <0 0x1000c000 0 0xe00>;
> +			#clock-cells = <1>;
> +		};
> +
> +		uart0: serial@11002000 {
> +			compatible = "mediatek,mt6779-uart",
> +				     "mediatek,mt6577-uart";
> +			reg = <0 0x11002000 0 0x400>;
> +			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART0>;
> +			clock-names = "baud", "bus";
> +			status = "disabled";
> +		};
> +
> +		uart1: serial@11003000 {
> +			compatible = "mediatek,mt6779-uart",
> +				     "mediatek,mt6577-uart";
> +			reg = <0 0x11003000 0 0x400>;
> +			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART1>;
> +			clock-names = "baud", "bus";
> +			status = "disabled";
> +		};
> +
> +		uart2: serial@11004000 {
> +			compatible = "mediatek,mt6779-uart",
> +				     "mediatek,mt6577-uart";
> +			reg = <0 0x11004000 0 0x400>;
> +			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART2>;
> +			clock-names = "baud", "bus";
> +			status = "disabled";
> +		};
> +
> +		audio: clock-controller@11210000 {
> +			compatible = "mediatek,mt6779-audio", "syscon";
> +			reg = <0 0x11210000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		mfgcfg: clock-controller@13fbf000 {
> +			compatible = "mediatek,mt6779-mfgcfg", "syscon";
> +			reg = <0 0x13fbf000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		mmsys: syscon@14000000 {
> +			compatible = "mediatek,mt6779-mmsys", "syscon";
> +			reg = <0 0x14000000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		imgsys: clock-controller@15020000 {
> +			compatible = "mediatek,mt6779-imgsys", "syscon";
> +			reg = <0 0x15020000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		vdecsys: clock-controller@16000000 {
> +			compatible = "mediatek,mt6779-vdecsys", "syscon";
> +			reg = <0 0x16000000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		vencsys: clock-controller@17000000 {
> +			compatible = "mediatek,mt6779-vencsys", "syscon";
> +			reg = <0 0x17000000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		camsys: clock-controller@1a000000 {
> +			compatible = "mediatek,mt6779-camsys", "syscon";
> +			reg = <0 0x1a000000 0 0x10000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		ipesys: clock-controller@1b000000 {
> +			compatible = "mediatek,mt6779-ipesys", "syscon";
> +			reg = <0 0x1b000000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +	};
> +};
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 16+ messages in thread

end of thread, other threads:[~2020-10-09 12:32 UTC | newest]

Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-30 13:30 [PATCH v10 0/3] Add basic SoC Support for Mediatek MT6779 SoC Hanks Chen
2020-07-30 13:30 ` [PATCH v10 1/3] dt-bindings: pinctrl: add bindings for MediaTek " Hanks Chen
2020-07-31 18:26   ` Rob Herring
2020-08-03 23:31   ` Linus Walleij
2020-07-30 13:30 ` [PATCH v10 2/3] arm64: dts: add dts nodes for MT6779 Hanks Chen
2020-08-05  2:24   ` Hanks Chen
2020-08-27  8:20     ` Matthias Brugger
2020-10-09 12:30   ` Matthias Brugger
2020-07-30 13:30 ` [PATCH v10 3/3] clk: mediatek: add UART0 clock support Hanks Chen
2020-09-08  6:25   ` Hanks Chen
2020-10-03 10:06     ` Hanks Chen
2020-10-08  2:00       ` Stephen Boyd
2020-10-08  2:39         ` Hanks Chen
2020-10-08 21:45           ` Stephen Boyd
2020-10-08  7:25         ` Matthias Brugger
2020-10-08 21:45   ` Stephen Boyd

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).