From mboxrd@z Thu Jan  1 00:00:00 1970
From: dianders@chromium.org (Doug Anderson)
Date: Wed, 6 Aug 2014 19:16:51 -0700
Subject: [PATCH v4 2/2] pwm: rockchip: Added to support for RK3288 SoC
In-Reply-To: <53E2D605.2000704@rock-chips.com>
References: <1406197295-10604-1-git-send-email-caesar.wang@rock-chips.com>
 <1406197295-10604-3-git-send-email-caesar.wang@rock-chips.com>
 <CAD=FV=V4Kp-H3CcAKZPV1jBnYX+Ntwvxx6RB13TLxS5RRPHTWA@mail.gmail.com>
 <53E2D605.2000704@rock-chips.com>
Message-ID: <CAD=FV=Xw8tz2keCUtO+qYUmnuv=+DPGZjY9-j_2XmAcP3Luzjg@mail.gmail.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Caesar,

On Wed, Aug 6, 2014 at 6:27 PM, caesar <caesar.wang@rock-chips.com> wrote:
> Doug,
>
> ? 2014?08?07? 06:46, Doug Anderson ??:
>
>> Caesar,
>>
>> On Thu, Jul 24, 2014 at 3:21 AM, Caesar Wang <caesar.wang@rock-chips.com>
>> wrote:
>>>
>>> +static const struct rockchip_pwm_data pwm_data_v1 = {
>>> +       .regs.duty = PWM_HRC,
>>> +       .regs.period = PWM_LRC,
>>> +       .regs.cntr = PWM_CNTR,
>>> +       .regs.ctrl = PWM_CTRL,
>>> +       .prescaler = PRESCALER,
>>> +       .set_enable = rockchip_pwm_set_enable_v1,
>>> +};
>>> +
>>> +static const struct rockchip_pwm_data pwm_data_v2 = {
>>> +       .regs.duty = PWM_LRC,
>>> +       .regs.period = PWM_HRC,
>>> +       .regs.cntr = PWM_CNTR,
>>> +       .regs.ctrl = PWM_CTRL,
>>> +       .prescaler = PRESCALER-1,
>>> +       .set_enable = rockchip_pwm_set_enable_v2,
>>> +};
>>> +
>>> +static const struct rockchip_pwm_data pwm_data_vop = {
>>> +       .regs.duty = PWM_LRC,
>>> +       .regs.period = PWM_HRC,
>>> +       .regs.cntr = PWM_CTRL,
>>> +       .regs.ctrl = PWM_CNTR,
>>
>> Did you really mean to flip CTRL and CNTR here?  If so, that's super
>> confusing and deserves a comment.  AKA, I think the above should not
>> be:
>>
>>   +       .regs.cntr = PWM_CTRL,
>>   +       .regs.ctrl = PWM_CNTR,
>>
>> ...but should be
>>
>>   +       .regs.cntr = PWM_CNTR,
>>   +       .regs.ctrl = PWM_CTRL,
>>
>> If you didn't mean to flip CTRL and CNTR here, then just get rid of
>> pwm_data_vop and refer to pwm_data_v2.  In fact, I'd suggest that you
>> totally remove the "rockchip,vop-pwm" since there's nothing different
>> between "rockchip,rk3288-pwm" and "rockchip,vop-pwm".
>
>
> Sorry,I think it's no problem. the  "rockchip,rk3288-pwm" and
> "rockchip,vop-pwm" are seperate PWM controllers.
> They are just different registers address between CNTR and CTRL .

OK, I looked up in the TRM.  Right, the CNTR and CTRL are flipped on
the vop.  So I think that the only change you need is to add:

#define PWM_VOP_CTRL  0x00
#define PWM_VOP_CNTR  0x0c

...then use these new #defines for the vop structure.


As you have the code written right now it's very confusing.  The new
#defines will fix this.


>> Have you validated Thierry's suggestion to allow you to access your
>> memory range?
>
> Yes,we have solve it in lcdc driver.
> The Mark Yao have the  submission in [0].
>
> [0]: https://lkml.org/lkml/2014/8/4/20

Excellent!  Then we should be able to land after you fix the above.

-Doug