From mboxrd@z Thu Jan 1 00:00:00 1970 From: martin.blumenstingl@googlemail.com (Martin Blumenstingl) Date: Sat, 20 May 2017 10:45:02 +0200 Subject: [PATCH 1/2] ARM: dts: meson: organize devices in their corresponding busses In-Reply-To: References: <20170417213938.22626-1-martin.blumenstingl@googlemail.com> <20170417213938.22626-2-martin.blumenstingl@googlemail.com> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sat, May 20, 2017 at 12:49 AM, Kevin Hilman wrote: > Martin Blumenstingl writes: > >> The Amlogic Meson SoCs have most of the internal peripherals organized >> in busses. Use them to make the dts easier to read and to avoid >> duplicated register (bus) offset definitions. >> >> The bus information is taken from the vendor kernel: >> #define IO_CBUS_PHY_BASE 0xc1100000 ///2M >> #define IO_AOBUS_PHY_BASE 0xc8100000 ///1M >> >> There are more internal busses (such as the abp bus which seems to >> contain audio, HDMI and Mali registers), but since we don't have >> drivers for them yet these are not added (yet). >> >> Signed-off-by: Martin Blumenstingl > > I tested this series on my meson8b-odroidc1 and it boots fine. > > Series looks fine to me, except... > > [...] > >> >> ethmac: ethernet at c9410000 { >> compatible = "amlogic,meson6-dwmac", "snps,dwmac"; >> reg = <0xc9410000 0x10000 >> - 0xc1108108 0x4>; >> + 0xc1108108 0x4>; > > stray tab removal? oh, excellent catch - thank you! > I fixed that up locally and applied to v4.13/dt64 branch. nice, thank you! do the ARM maintainers still want separate pull-requests for 32-bit and 64-bit .dts/defconfig/etc. changes? you might want to move the three latest commits from v4.13/dt64 to v4.13/dt32 in that case, but this should be trivial (since these patches don't depend on anything else) > Thanks for the patches! you're welcome, hopefully more to follow! Regards, Martin