* [PATCH v3] arm64: dts: meson: Fix mmc cd-gpios polarity
@ 2019-01-10 15:40 Loys Ollivier
2019-01-11 1:28 ` Kevin Hilman
2019-01-11 19:46 ` Martin Blumenstingl
0 siblings, 2 replies; 5+ messages in thread
From: Loys Ollivier @ 2019-01-10 15:40 UTC (permalink / raw)
To: devicetree, Kevin Hilman, linux-amlogic
Cc: Martin Blumenstingl, Linus Walleij, Loys Ollivier, linux-mmc,
linux-kernel, linux-arm-kernel, Jerome Brunet
Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
changed the behavior of "cd-inverted" to follow the device tree bindings
specification.
Lines specifying "cd-inverted" are now "active high".
Fix the SD card for meson by setting the cd-gpios as "active low" according
to the boards specifications.
Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
Signed-off-by: Loys Ollivier <lollivier@baylibre.com>
---
v3: fix typos in the commit message
v2: fix more occurences, also in other meson boards.
arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 3 +--
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 3 +--
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 3 +--
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 3 +--
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 3 +--
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 3 +--
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 3 +--
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 3 +--
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 3 +--
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 3 +--
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 3 +--
arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 3 +--
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 3 +--
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 3 +--
14 files changed, 14 insertions(+), 28 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index e14e0ce7e89f..016641a41694 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -187,8 +187,7 @@
max-frequency = <100000000>;
disable-wp;
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index 8cd50b75171d..ade2ee09ae96 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -305,8 +305,7 @@
max-frequency = <200000000>;
disable-wp;
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vddio_ao3v3>;
vqmmc-supply = <&vddio_tf>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
index 4cf7f6e80c6a..25105ac96d55 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -238,8 +238,7 @@
max-frequency = <100000000>;
disable-wp;
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_card>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 2e1cd5e3a246..1cc9dc68ef00 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -258,8 +258,7 @@
max-frequency = <100000000>;
disable-wp;
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&tflash_vdd>;
vqmmc-supply = <&tf_io>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
index ce862266b9aa..0be0f2a5d2fe 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -196,8 +196,7 @@
max-frequency = <100000000>;
disable-wp;
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_card>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 93a4acf2c46c..ad4d50bd9d77 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -154,8 +154,7 @@
max-frequency = <100000000>;
disable-wp;
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vcc_3v3>;
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index ec09bb5792b7..2d2db783c44c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -211,8 +211,7 @@
max-frequency = <100000000>;
disable-wp;
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vcc_3v3>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
index f1c410e2da2b..796baea7a0bf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
@@ -131,8 +131,7 @@
max-frequency = <100000000>;
disable-wp;
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_card>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index db293440e4ca..255cede7b447 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -238,8 +238,7 @@
max-frequency = <100000000>;
disable-wp;
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vcc_card>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
index 6739697be1de..9cbdb85fb591 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
@@ -183,8 +183,7 @@
max-frequency = <100000000>;
disable-wp;
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_card>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
index a1b31013ab6e..bc811a2faf42 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@@ -137,8 +137,7 @@
max-frequency = <100000000>;
disable-wp;
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index 3c3a667a8df8..3f086ed7de05 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -356,8 +356,7 @@
max-frequency = <100000000>;
disable-wp;
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index f7a1cffab4a8..8acfd40090d2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -147,8 +147,7 @@
max-frequency = <100000000>;
disable-wp;
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
index 7212dc4531e4..7fa20a8ede17 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
@@ -170,8 +170,7 @@
max-frequency = <100000000>;
disable-wp;
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH v3] arm64: dts: meson: Fix mmc cd-gpios polarity
2019-01-10 15:40 [PATCH v3] arm64: dts: meson: Fix mmc cd-gpios polarity Loys Ollivier
@ 2019-01-11 1:28 ` Kevin Hilman
2019-01-11 19:46 ` Martin Blumenstingl
1 sibling, 0 replies; 5+ messages in thread
From: Kevin Hilman @ 2019-01-11 1:28 UTC (permalink / raw)
To: Loys Ollivier, devicetree, linux-amlogic
Cc: Martin Blumenstingl, Linus Walleij, Loys Ollivier, linux-mmc,
linux-kernel, linux-arm-kernel, Jerome Brunet
Loys Ollivier <lollivier@baylibre.com> writes:
> Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
> changed the behavior of "cd-inverted" to follow the device tree bindings
> specification.
> Lines specifying "cd-inverted" are now "active high".
>
> Fix the SD card for meson by setting the cd-gpios as "active low" according
> to the boards specifications.
>
> Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
> Signed-off-by: Loys Ollivier <lollivier@baylibre.com>
Thanks for fixing this!
Queued as a fix for v5.1-rc,
I see that this is being fixed in the driver also, but I think fixing
the DTs is necessary also.
Kevin
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH v3] arm64: dts: meson: Fix mmc cd-gpios polarity
2019-01-10 15:40 [PATCH v3] arm64: dts: meson: Fix mmc cd-gpios polarity Loys Ollivier
2019-01-11 1:28 ` Kevin Hilman
@ 2019-01-11 19:46 ` Martin Blumenstingl
2019-01-11 19:55 ` Kevin Hilman
1 sibling, 1 reply; 5+ messages in thread
From: Martin Blumenstingl @ 2019-01-11 19:46 UTC (permalink / raw)
To: Loys Ollivier
Cc: devicetree, Kevin Hilman, Linus Walleij, linux-mmc, linux-kernel,
linux-amlogic, linux-arm-kernel, Jerome Brunet
Hi,
some nit-picks as well as my Tested-by (in case it's not too late) below.
thank you for taking care of this!
On Thu, Jan 10, 2019 at 4:40 PM Loys Ollivier <lollivier@baylibre.com> wrote:
>
> Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
> changed the behavior of "cd-inverted" to follow the device tree bindings
> specification.
> Lines specifying "cd-inverted" are now "active high".
this depends on the polarity from the cd-gpios property. above commit
caused cd-inverted to be applied twice (effectively making it a
no-op). thus "cd-inverted" only means "active high" if cd-gpios also
sets GPIO_ACTIVE_HIGH. if the polarity in cd-gpios is GPIO_ACTIVE_LOW
together with "cd-inverted" then the GPIO will be treated as active
low.
> Fix the SD card for meson by setting the cd-gpios as "active low" according
> to the boards specifications.
not only switching to GPIO_ACTIVE_LOW, also dropping "cd-inverted"
> Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
in my patches for the 32-bit boards I used the commit which added SD
card support to the board for the Fixes tag. however, I'm fine with
this as well (I just wanted to point out that there's a small
difference in our commits).
> Signed-off-by: Loys Ollivier <lollivier@baylibre.com>
on my Khadas VIM(1), using Kevin's v5.0/fixes branch:
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Regards
Martin
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH v3] arm64: dts: meson: Fix mmc cd-gpios polarity
2019-01-11 19:46 ` Martin Blumenstingl
@ 2019-01-11 19:55 ` Kevin Hilman
2019-01-14 13:30 ` Loys Ollivier
0 siblings, 1 reply; 5+ messages in thread
From: Kevin Hilman @ 2019-01-11 19:55 UTC (permalink / raw)
To: Martin Blumenstingl, Loys Ollivier
Cc: devicetree, Linus Walleij, linux-mmc, linux-kernel,
linux-amlogic, linux-arm-kernel, Jerome Brunet
Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:
> Hi,
>
> some nit-picks as well as my Tested-by (in case it's not too late) below.
> thank you for taking care of this!
>
> On Thu, Jan 10, 2019 at 4:40 PM Loys Ollivier <lollivier@baylibre.com> wrote:
>>
>> Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
>> changed the behavior of "cd-inverted" to follow the device tree bindings
>> specification.
>> Lines specifying "cd-inverted" are now "active high".
> this depends on the polarity from the cd-gpios property. above commit
> caused cd-inverted to be applied twice (effectively making it a
> no-op). thus "cd-inverted" only means "active high" if cd-gpios also
> sets GPIO_ACTIVE_HIGH. if the polarity in cd-gpios is GPIO_ACTIVE_LOW
> together with "cd-inverted" then the GPIO will be treated as active
> low.
>
>> Fix the SD card for meson by setting the cd-gpios as "active low" according
>> to the boards specifications.
> not only switching to GPIO_ACTIVE_LOW, also dropping "cd-inverted"
>
>> Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
> in my patches for the 32-bit boards I used the commit which added SD
> card support to the board for the Fixes tag. however, I'm fine with
> this as well (I just wanted to point out that there's a small
> difference in our commits).
>
>> Signed-off-by: Loys Ollivier <lollivier@baylibre.com>
> on my Khadas VIM(1), using Kevin's v5.0/fixes branch:
> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
I can add this tested-by tag in my v5.0/fixes branch for now, and can
replace it with a follow up if Loys can update the changelog with your
suggestions/clarifications.
Thanks,
Kevin
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH v3] arm64: dts: meson: Fix mmc cd-gpios polarity
2019-01-11 19:55 ` Kevin Hilman
@ 2019-01-14 13:30 ` Loys Ollivier
0 siblings, 0 replies; 5+ messages in thread
From: Loys Ollivier @ 2019-01-14 13:30 UTC (permalink / raw)
To: Martin Blumenstingl
Cc: devicetree, Kevin Hilman, Linus Walleij, Loys Ollivier,
linux-mmc, linux-kernel, linux-amlogic, linux-arm-kernel,
Jerome Brunet
Hello,
On Fri 11 Jan 2019 at 19:55, Kevin Hilman wrote:
> Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:
>
>> Hi,
>>
>> some nit-picks as well as my Tested-by (in case it's not too late) below.
>> thank you for taking care of this!
>>
You're welcome !
>> On Thu, Jan 10, 2019 at 4:40 PM Loys Ollivier <lollivier@baylibre.com>
>> wrote:
>>>
>>> Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
>>> changed the behavior of "cd-inverted" to follow the device tree bindings
>>> specification.
>>> Lines specifying "cd-inverted" are now "active high".
>> this depends on the polarity from the cd-gpios property. above commit
>> caused cd-inverted to be applied twice (effectively making it a
>> no-op). thus "cd-inverted" only means "active high" if cd-gpios also
>> sets GPIO_ACTIVE_HIGH. if the polarity in cd-gpios is GPIO_ACTIVE_LOW
>> together with "cd-inverted" then the GPIO will be treated as active
>> low.
>>
Hum ok so there's more to it than the commit message. I'll come by with
something clearer for a v4. Thank you for the clarification.
>>> Fix the SD card for meson by setting the cd-gpios as "active low"
>>> according
>>> to the boards specifications.
>> not only switching to GPIO_ACTIVE_LOW, also dropping "cd-inverted"
>>
Indeed.
>>> Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
>> in my patches for the 32-bit boards I used the commit which added SD
>> card support to the board for the Fixes tag. however, I'm fine with
>> this as well (I just wanted to point out that there's a small
>> difference in our commits).
>>
OK, I treat fixes tags as:
from the introduction (or discovery) of a regression (or bug), the
"Fixes" commit will patch the commit that introduced the regression.
Hence why I tagged the commit from which the platform was not acting
correctly anymore. If that's fine for you it's fine for me as well :)
>>> Signed-off-by: Loys Ollivier <lollivier@baylibre.com>
>> on my Khadas VIM(1), using Kevin's v5.0/fixes branch:
>> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>
> I can add this tested-by tag in my v5.0/fixes branch for now, and can
> replace it with a follow up if Loys can update the changelog with your
> suggestions/clarifications.
>
Will do.
> Thanks,
>
> Kevin
--
-L
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-01-14 13:30 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-10 15:40 [PATCH v3] arm64: dts: meson: Fix mmc cd-gpios polarity Loys Ollivier
2019-01-11 1:28 ` Kevin Hilman
2019-01-11 19:46 ` Martin Blumenstingl
2019-01-11 19:55 ` Kevin Hilman
2019-01-14 13:30 ` Loys Ollivier
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).