Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: khilman@baylibre.com, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org
Subject: Re: [PATCH v3 3/3] arm64: dts: meson: Add minimal support for Odroid-N2
Date: Tue, 21 May 2019 20:01:51 +0200
Message-ID: <CAFBinCDzvroNfzhZHhDdvc+VR1eQNg5JMJ7F9=++hdWKcEXSOw@mail.gmail.com> (raw)
In-Reply-To: <20190521151952.2779-4-narmstrong@baylibre.com>

Hi Neil,

On Tue, May 21, 2019 at 5:20 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
[...]
> +       hub_5v: regulator-hub_5v {
> +               compatible = "regulator-fixed";
> +               regulator-name = "HUB_5V";
> +               regulator-min-microvolt = <5000000>;
> +               regulator-max-microvolt = <5000000>;
> +               vin-supply = <&vcc_5v>;
> +
> +               gpio = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
I missed this in the review of v1:
according to the schematics GPIOH_5 is routed to GL3523 (soldered down
USB hub) CHIP_EN signal.
The datasheet [0] mentions that this will "Disable whole chip and keep
hub in lowest power state (standby mode)"

do you know if this is a similar case as GPIOH_4 (USB hub reset line,
we configure this using a gpio-hog)?

[...]
> +&ext_mdio {
> +       external_phy: ethernet-phy@0 {
> +               /* Realtek RTL8211F (0x001cc916) */
> +               reg = <0>;
> +               max-speed = <1000>;
> +               eee-broken-1000t;
are we in the same situation that we have on the X96 Max where network
dies without eee-broken-1000t?

[...]
> +&usb2_phy0 {
> +       phy-supply = <&usb_pwr_en>;
is usb_pwr_en really the phy-supply or is it the vbus-supply of the
USB top control block (&usb node)?

if these three questions are answered then you can add my:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>


Regards
Martin


[0] https://datasheet.lcsc.com/szlcsc/GL3523-OV3S1_C157363.pdf

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-21 15:19 [PATCH v3 0/3] arm64: Add initial " Neil Armstrong
2019-05-21 15:19 ` [PATCH v3 1/3] dt-bindings: arm: amlogic: add G12B bindings Neil Armstrong
2019-05-21 17:27   ` Martin Blumenstingl
2019-05-21 15:19 ` [PATCH v3 2/3] dt-bindings: arm: amlogic: add Odroid-N2 binding Neil Armstrong
2019-05-21 15:26   ` Rob Herring
2019-05-21 17:26   ` Martin Blumenstingl
2019-05-21 15:19 ` [PATCH v3 3/3] arm64: dts: meson: Add minimal support for Odroid-N2 Neil Armstrong
2019-05-21 16:11   ` Robin Murphy
2019-05-22  7:59     ` Neil Armstrong
2019-05-21 18:01   ` Martin Blumenstingl [this message]
2019-05-22  8:19     ` Neil Armstrong

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAFBinCDzvroNfzhZHhDdvc+VR1eQNg5JMJ7F9=++hdWKcEXSOw@mail.gmail.com' \
    --to=martin.blumenstingl@googlemail.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=narmstrong@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org infradead-linux-arm-kernel@archiver.kernel.org
	public-inbox-index linux-arm-kernel


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox