From mboxrd@z Thu Jan 1 00:00:00 1970 From: gautam.vivek@samsung.com (Vivek Gautam) Date: Wed, 10 Sep 2014 10:53:23 +0530 Subject: [PATCH v6 4/4] phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800 In-Reply-To: <20140910045328.GA32475@saruman.home> References: <20140903144225.GD31855@saruman.home> <20140905175651.GK24449@saruman.home> <20140908134454.GK22409@saruman.home> <20140909144225.GF6151@saruman.home> <20140910045328.GA32475@saruman.home> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Sep 10, 2014 at 10:23 AM, Felipe Balbi wrote: > On Wed, Sep 10, 2014 at 09:09:57AM +0530, Vivek Gautam wrote: >> On Wed, Sep 10, 2014 at 9:07 AM, Vivek Gautam wrote: >> > adding Julius here, >> >> i think i had missed adding Julius for this entire series :-( >> I should be more careful with the CC list in future. >> Added his chromium id, since that seems to be more active. >> >> > >> > >> > On Tue, Sep 9, 2014 at 8:12 PM, Felipe Balbi wrote: >> >> On Tue, Sep 09, 2014 at 07:19:50AM +0530, Vivek Gautam wrote: >> >>> Hi, >> >>> >> >>> >> >>> On Mon, Sep 8, 2014 at 7:14 PM, Felipe Balbi wrote: >> >>> > Hi, >> >>> > >> >>> > On Mon, Sep 08, 2014 at 09:53:09AM +0530, Vivek Gautam wrote: >> >>> >> On Fri, Sep 5, 2014 at 11:26 PM, Felipe Balbi wrote: >> >>> >> > On Thu, Sep 04, 2014 at 12:01:19PM +0530, Vivek Gautam wrote: >> >>> >> >> > Don't we have phy_power_on() >> >>> >> >> > for that ? It looks like you could just as well do this from >> >>> >> >> > phy_power_on() ? >> >>> >> >> >> >>> >> >> No, unfortunately keeping these calibration settings in phy_power_on() >> >>> >> >> doesn't help, since we need to do this after XHCI reset has happened. >> >>> >> > >> >>> >> > teach xHCI about PHYs ? >> >>> >> >> >>> >> sorry i couldn't understand you here. >> >>> >> Aren't we trying to do the same with Heikki's patch about dwc3 : >> >>> >> [PATCH 6/6] usb: dwc3: host: convey the PHYs to xhci >> >>> >> >> >>> >> and the 2nd patch in this series : >> >>> >> [PATCH v6 2/4] usb: host: xhci-plat: Get PHYs for xhci's hcds >> >>> >> >> >>> >> Is there something else that is expected ? >> >>> > >> >>> > right, use that to call phy_init() at the right time, then you need to >> >>> > add a new ->calibrate() method which, likely, will only be used by you >> >>> > ;-) >> >>> >> >>> so you mean, the xhci should itself call phy_init() at a time suitable, >> >>> so that ->calibrate() is not required at all ? >> >>> >> >>> i think you meant there - "then you __do not__ need to >> >> >> >> right :-) >> > >> > alright, i will prepare a patch for the suggested change. >> > >> > But AFAI remember we had discussion for this patch in earlier >> > version, and Julius suggested to use a generic approach for such >> > change wherein other users in future may be able to use the >> > facility. > > right, and what's more generic than adding the support for PHYs straight > into xHCI ? > > What I fear is that we end up opening the doors for every odd > platform-specific operation to be added to the framework without really > considering what needs to be done. That would defeat the idea of having > a generic framework altogether. Ok, i will prepare the patch series as suggested and post it to gather opinion from you. :-) > > cheers > > -- > balbi -- Best Regards Vivek Gautam Samsung R&D Institute, Bangalore India