Re: [PATCH v3 1/2] ASoC: qcom: dt-bindings: Add sc7180 machine bindings - Cheng-yi Chiang

From: Cheng-yi Chiang <cychiang@chromium.org>
To: Rob Herring <robh@kernel.org>
Cc: Taniya Das <tdas@codeaurora.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	"moderated list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER
	MANAGEM..." <alsa-devel@alsa-project.org>,
	Banajit Goswami <bgoswami@codeaurora.org>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	Stephan Gerhold <stephan@gerhold.net>,
	Liam Girdwood <lgirdwood@gmail.com>,
	linux-arm-msm <linux-arm-msm@vger.kernel.org>,
	Patrick Lai <plai@codeaurora.org>, Takashi Iwai <tiwai@suse.com>,
	Doug Anderson <dianders@chromium.org>,
	Tzung-Bi Shih <tzungbi@chromium.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>, Andy Gross <agross@kernel.org>,
	Srini Kandagatla <srinivas.kandagatla@linaro.org>,
	Mark Brown <broonie@kernel.org>,
	Rohit kumar <rohitkr@codeaurora.org>,
	Dylan Reid <dgreid@chromium.org>,
	Linux ARM <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v3 1/2] ASoC: qcom: dt-bindings: Add sc7180 machine bindings
Date: Mon, 3 Aug 2020 16:24:32 +0800	[thread overview]
Message-ID: <CAFv8NwLCkHBVE-JcaDLOrRs6U_MhS4_n1oBicNG1DjQxh-d3UQ@mail.gmail.com> (raw)
In-Reply-To: <20200731182712.GA531472@bogus>

On Sat, Aug 1, 2020 at 2:27 AM Rob Herring <robh@kernel.org> wrote:
>
> On Fri, 31 Jul 2020 16:40:22 +0800, Cheng-Yi Chiang wrote:
> > Add devicetree bindings documentation file for sc7180 sound card.
> >
> > Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
> > ---
> >  .../bindings/sound/qcom,sc7180.yaml           | 113 ++++++++++++++++++
> >  1 file changed, 113 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/sound/qcom,sc7180.yaml
> >
>
>
> My bot found errors running 'make dt_binding_check' on your patch:
>
> Documentation/devicetree/bindings/sound/qcom,sc7180.example.dts:32.24-41.15: Warning (unit_address_vs_reg): /example-0/sound/dai-link@0: node has a unit name, but no reg or ranges property
> Documentation/devicetree/bindings/sound/qcom,sc7180.example.dts:43.24-52.15: Warning (unit_address_vs_reg): /example-0/sound/dai-link@1: node has a unit name, but no reg or ranges property
>
>
> See https://patchwork.ozlabs.org/patch/1339316
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure dt-schema is up to date:
>
> pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
>
> Please check and re-submit.
>
I have passed this in v2 patch, but removed reg in v3 patch since it
is not used.
In v4, I have added back reg = <0> and reg = <1> into the example, and
reg property into schema to fix this error.
Since reg property is not used in the driver, I am not sure whether I
should add it in the schema.
Please let me know which is preferred. Thanks!

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel