Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Robert Foss <robert.foss@linaro.org>
To: Maxime Ripard <maxime@cerno.tech>
Cc: "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	Tomasz Figa <tfiga@chromium.org>,
	Sakari Ailus <sakari.ailus@iki.fi>,
	Dongchun Zhu <dongchun.zhu@mediatek.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Fabio Estevam <festevam@gmail.com>,
	"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
	<linux-arm-kernel@lists.infradead.org>,
	linux-media <linux-media@vger.kernel.org>
Subject: Re: [PATCH v6 1/3] media: dt-bindings: ov8856: Document YAML bindings
Date: Thu, 2 Apr 2020 12:10:00 +0200
Message-ID: <CAG3jFyvUd08U9yNVPUD9Y=nd5Xpcx34GcHJRhtvAAycoq3qimg@mail.gmail.com> (raw)
In-Reply-To: <20200401080705.j4goeqcqhoswhx4u@gilmour.lan>

Hey Maxime,

On Wed, 1 Apr 2020 at 10:07, Maxime Ripard <maxime@cerno.tech> wrote:
>
> Hi,
>
> On Tue, Mar 31, 2020 at 03:33:44PM +0200, Robert Foss wrote:
> > From: Dongchun Zhu <dongchun.zhu@mediatek.com>
> >
> > This patch adds documentation of device tree in YAML schema for the
> > OV8856 CMOS image sensor.
> >
> > Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
> > ---
> >
> > - Changes since v5:
> >   * Add assigned-clocks and assigned-clock-rates
> >   * robher: dt-schema errors
> >
> > - Changes since v4:
> >   * Fabio: Change reset-gpio to GPIO_ACTIVE_LOW, explain in description
> >   * Add clock-lanes property to example
> >   * robher: Fix syntax error in devicetree example
> >
> > - Changes since v3:
> >   * robher: Fix syntax error
> >   * robher: Removed maxItems
> >   * Fixes yaml 'make dt-binding-check' errors
> >
> > - Changes since v2:
> >   Fixes comments from from Andy, Tomasz, Sakari, Rob.
> >   * Convert text documentation to YAML schema.
> >
> > - Changes since v1:
> >   Fixes comments from Sakari, Tomasz
> >   * Add clock-frequency and link-frequencies in DT
> >
> >  .../devicetree/bindings/media/i2c/ov8856.yaml | 150 ++++++++++++++++++
> >  MAINTAINERS                                   |   1 +
> >  2 files changed, 151 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> > new file mode 100644
> > index 000000000000..beeddfbb8709
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> > @@ -0,0 +1,150 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +# Copyright (c) 2019 MediaTek Inc.
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/i2c/ov8856.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Omnivision OV8856 CMOS Sensor Device Tree Bindings
> > +
> > +maintainers:
> > +  - Ben Kao <ben.kao@intel.com>
> > +  - Dongchun Zhu <dongchun.zhu@mediatek.com>
> > +
> > +description: |-
> > +  The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS
> > +  image sensor that delivers 3264x2448 at 30fps. It provides full-frame,
> > +  sub-sampled, and windowed 10-bit MIPI images in various formats via the
> > +  Serial Camera Control Bus (SCCB) interface. This chip is programmable
> > +  through I2C and two-wire SCCB. The sensor output is available via CSI-2
> > +  serial data output (up to 4-lane).
> > +
> > +properties:
> > +  compatible:
> > +    const: ovti,ov8856
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  clock-names:
> > +    description:
> > +      Input clock for the sensor.
> > +    items:
> > +      - const: xvclk
> > +
> > +  clock-frequency:
> > +    description:
> > +      Frequency of the xvclk clock in Hertz.
>
> We also had that discussion recently for another omnivision sensor
> (ov5645 iirc), but what is clock-frequency useful for?
>
> It seems that the sensor is passed in clocks, so if you need to
> retrieve the clock rate you should use the clock API instead.
>
> Looking at the driver, it looks like it first retrieves the clock, set
> it to clock-frequency, and then checks that this is OV8856_XVCLK_19_2
> (19.2 MHz).

As far as I understand it, 19.2MHz is requirement for the sensor mode
that currently defaults to. Some modes require higher clock speeds
than this however.

>
> The datasheet says that the sensor can have any frequency in the 6 -
> 27 MHz range, so this is a driver limitation and should be set in the
> driver using the clock API, and you can always bail out if it doesn't
> provide a rate that is not acceptable for the drivers assumption.
>
> In any case, you don't need clock-frequency here...

So your suggestion is that we remove all clocks-rate properties, and
replace the clk_get_rate() calls in the driver with clk_set_rate()
calls for the desired frequencies?

>
> > +  assigned-clocks:
> > +    description:
> > +      Input clock for the sensor.
> > +
> > +  assigned-clock-rates:
> > +    description:
> > +      Frequency of the xvclk clock in Hertz.
>
> And you don't need assigned-clock-rates either.

Ack.

>
> Maxime

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply index

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-31 13:33 [PATCH v3 0/3] media: ov8856: Add devicetree support Robert Foss
2020-03-31 13:33 ` [PATCH v6 1/3] media: dt-bindings: ov8856: Document YAML bindings Robert Foss
2020-03-31 15:12   ` Marco Felsch
2020-04-02  9:57     ` Robert Foss
2020-04-03 19:21       ` Marco Felsch
2020-04-01  8:07   ` Maxime Ripard
2020-04-02 10:10     ` Robert Foss [this message]
2020-04-03 23:27       ` Sakari Ailus
2020-04-04  9:34         ` Maxime Ripard
2020-04-06  8:25           ` Robert Foss
2020-04-06  8:35           ` Sakari Ailus
2020-04-07  8:36             ` Maxime Ripard
2020-04-07 11:29               ` Robert Foss
2020-04-07 12:32                 ` Maxime Ripard
2020-04-07 15:47                   ` Robert Foss
2020-04-07 16:39                     ` Sakari Ailus
2020-04-07 16:46                       ` Tomasz Figa
2020-04-07 17:20                         ` Sakari Ailus
2020-04-08 12:21                           ` Maxime Ripard
2020-04-08 12:35                             ` Tomasz Figa
2020-04-08 13:43                               ` Maxime Ripard
2020-04-08 15:28                                 ` Sakari Ailus
2020-04-08 15:30                                   ` Sakari Ailus
2020-04-08 16:34                                     ` Andy Shevchenko
2020-04-15 10:18                                     ` Maxime Ripard
2020-04-15 11:10                                       ` Robert Foss
2020-04-15 16:16                                       ` Sakari Ailus
2020-04-20 15:02                                         ` Maxime Ripard
2020-04-09  8:32                                   ` Robert Foss
2020-04-07 16:20                   ` Sakari Ailus
2020-04-04  9:23       ` Maxime Ripard
2020-03-31 13:33 ` [PATCH v3 2/3] media: ov8856: Add devicetree support Robert Foss
2020-03-31 14:01   ` Andy Shevchenko
2020-04-06 13:37     ` Robert Foss
2020-04-06 15:06       ` Andy Shevchenko
2020-04-06 15:25         ` Robert Foss
2020-04-03 23:33   ` Sakari Ailus
2020-03-31 13:33 ` [PATCH v3 3/3] media: ov8856: Implement sensor module revision identification Robert Foss

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAG3jFyvUd08U9yNVPUD9Y=nd5Xpcx34GcHJRhtvAAycoq3qimg@mail.gmail.com' \
    --to=robert.foss@linaro.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dongchun.zhu@mediatek.com \
    --cc=festevam@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=maxime@cerno.tech \
    --cc=sakari.ailus@iki.fi \
    --cc=tfiga@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git