linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 00/14] media: sun4i-csi: A10/A20 CSI1 and R40 CSI0 support
@ 2019-12-15 16:59 Chen-Yu Tsai
  2019-12-15 16:59 ` [PATCH 01/14] dt-bindings: media: sun4i-csi: Add compatible for CSI1 on A10/A20 Chen-Yu Tsai
                   ` (14 more replies)
  0 siblings, 15 replies; 34+ messages in thread
From: Chen-Yu Tsai @ 2019-12-15 16:59 UTC (permalink / raw)
  To: Maxime Ripard, Mauro Carvalho Chehab, Sakari Ailus, Rob Herring,
	Mark Rutland
  Cc: devicetree, Chen-Yu Tsai, linux-kernel, linux-arm-kernel, linux-media

From: Chen-Yu Tsai <wens@csie.org>

Hi everyone,

This series adds basic support for CSI1 on Allwinner A10/A20 and CSI0 on
Allwinner R40. The CSI1 block has the same structure and layout as the
CSI0 block. Differences include:

  - Only one channel in BT.656 instead of four in CSI0
  - 10-bit raw data input vs 8-bit in CSI0
  - 24-bit RGB888/YUV444 input vs 16-bit RGB565/YUV422 in CSI0
  - No ISP hardware (CSI SCLK not needed)

The CSI0 block in the Allwinner R40 SoC looks to be the same as the one
in the A20. The register maps line up, and they support the same
features. The R40 appears to support BT.1120 based on the feature
overview, but it is not mentioned anywhere else. Also like the A20, the
ISP is not mentioned, but the CSI special clock needs to be enabled for
the hardware to function. The manual does state that the CSI special
clock is the TOP clock for all CSI hardware, but currently no hardware
exists for us to test if CSI1 also depends on it or not.

Included are a couple of fixes for signal polarity and DRAM offset
handling.

Patches 1 and 2 add compatible strings for the newly supported hardware.

Patches 3 and 4 fix the polarity setting of [HV]sync and data sampling.
Allwinner hardware uses [HV]ref semantics instead of [HV]sync.

Patch 5 deals with the DRAM offset when the CSI hardware does DMA. The
hardware does DMA directly to the memory bus, thus requiring the address
to not be offset like when DMA is done over the system bus.

Patch 6 add support for the CSI1 hardware block. For now this simply
means not requiring the ISP clock.

Patches 7 and 8 add CSI1 to A10 (sun4i) and A20 (sun7i) dtsi files.

Patch 9 adds I2C pixmuxing options for the R40. Used in the last example
patch.

Patch 10 adds a compatible string for the R40's MBUS (memory bus).

Patch 11 adds CSI0 to the R40 dtsi file

Patches 12 through 14 are examples of cameras hooked up to boards.

Please have a look. The MBUS compatible patch is likely to conflict
with a DT binding conversion patch Maxime sent out.

Also, I sent out an email asking about the polarity settings for
[HV]sync, how to signal the use of [HV]ref instead, and how to pass
timings from the camera to the capture interface. So far I haven't
heard back. In particular I think the OV7670 driver has inverted
polarity settings for HSYNC. Not sure about VSYNC.


Regards
ChenYu


Chen-Yu Tsai (14):
  dt-bindings: media: sun4i-csi: Add compatible for CSI1 on A10/A20
  dt-bindings: media: sun4i-csi: Add compatible for CSI0 on R40
  media: sun4i-csi: Fix data sampling polarity handling
  media: sun4i-csi: Fix [HV]sync polarity handling
  media: sun4i-csi: Deal with DRAM offset
  media: sun4i-csi: Add support for A10 CSI1 camera sensor interface
  ARM: dts: sun4i: Add CSI1 controller and pinmux options
  ARM: dts: sun7i: Add CSI1 controller and pinmux options
  ARM: dts: sun8i: r40: Add I2C pinmux options
  dt-bindings: bus: sunxi: Add R40 MBUS compatible
  ARM: dts: sun8i: r40: Add device node for CSI0
  [DO NOT MERGE] ARM: dts: sun4i: cubieboard: Enable OV7670 camera on
    CSI1
  [DO NOT MERGE] ARM: dts: sun7i: cubieboard2: Enable OV7670 camera on
    CSI1
  [DO NOT MERGE] ARM: dts: sun8i-r40: bananapi-m2-ultra: Enable OV5640
    camera

 .../bindings/arm/sunxi/sunxi-mbus.txt         |  1 +
 .../media/allwinner,sun4i-a10-csi.yaml        | 14 +++-
 arch/arm/boot/dts/sun4i-a10-cubieboard.dts    | 42 ++++++++++++
 arch/arm/boot/dts/sun4i-a10.dtsi              | 35 ++++++++++
 arch/arm/boot/dts/sun7i-a20-cubieboard2.dts   | 42 ++++++++++++
 arch/arm/boot/dts/sun7i-a20.dtsi              | 36 ++++++++++
 .../boot/dts/sun8i-r40-bananapi-m2-ultra.dts  | 67 +++++++++++++++++++
 arch/arm/boot/dts/sun8i-r40.dtsi              | 64 ++++++++++++++++++
 .../platform/sunxi/sun4i-csi/sun4i_csi.c      | 57 ++++++++++++++--
 .../platform/sunxi/sun4i-csi/sun4i_csi.h      |  6 +-
 .../platform/sunxi/sun4i-csi/sun4i_dma.c      | 20 ++++--
 11 files changed, 370 insertions(+), 14 deletions(-)

-- 
2.24.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 34+ messages in thread

end of thread, other threads:[~2023-01-16 18:44 UTC | newest]

Thread overview: 34+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-15 16:59 [PATCH 00/14] media: sun4i-csi: A10/A20 CSI1 and R40 CSI0 support Chen-Yu Tsai
2019-12-15 16:59 ` [PATCH 01/14] dt-bindings: media: sun4i-csi: Add compatible for CSI1 on A10/A20 Chen-Yu Tsai
2019-12-16 10:30   ` Maxime Ripard
2019-12-19 23:56   ` Rob Herring
2019-12-15 16:59 ` [PATCH 02/14] dt-bindings: media: sun4i-csi: Add compatible for CSI0 on R40 Chen-Yu Tsai
2019-12-16 10:30   ` Maxime Ripard
2019-12-19 23:57   ` Rob Herring
2019-12-15 16:59 ` [PATCH 03/14] media: sun4i-csi: Fix data sampling polarity handling Chen-Yu Tsai
2019-12-16 13:36   ` Maxime Ripard
2019-12-15 16:59 ` [PATCH 04/14] media: sun4i-csi: Fix [HV]sync " Chen-Yu Tsai
2019-12-16 13:37   ` Maxime Ripard
2023-01-16 10:03   ` Oleg Verych
2023-01-16 10:16     ` Maxime Ripard
2023-01-16 18:43       ` Oleg Verych
2019-12-15 16:59 ` [PATCH 05/14] media: sun4i-csi: Deal with DRAM offset Chen-Yu Tsai
2019-12-16 13:38   ` Maxime Ripard
2019-12-15 16:59 ` [PATCH 06/14] media: sun4i-csi: Add support for A10 CSI1 camera sensor interface Chen-Yu Tsai
2019-12-16 13:38   ` Maxime Ripard
2020-01-02 11:33   ` Sakari Ailus
2020-01-02 11:36     ` Chen-Yu Tsai
2019-12-15 16:59 ` [PATCH 07/14] ARM: dts: sun4i: Add CSI1 controller and pinmux options Chen-Yu Tsai
2019-12-15 16:59 ` [PATCH 08/14] ARM: dts: sun7i: " Chen-Yu Tsai
2019-12-15 16:59 ` [PATCH 09/14] ARM: dts: sun8i: r40: Add I2C " Chen-Yu Tsai
2019-12-16 10:29   ` Maxime Ripard
2019-12-15 16:59 ` [PATCH 10/14] dt-bindings: bus: sunxi: Add R40 MBUS compatible Chen-Yu Tsai
2019-12-19 23:58   ` Rob Herring
2019-12-15 16:59 ` [PATCH 11/14] ARM: dts: sun8i: r40: Add device node for CSI0 Chen-Yu Tsai
2019-12-16 13:39   ` Maxime Ripard
2019-12-16 13:42     ` Chen-Yu Tsai
2019-12-16 13:53       ` Maxime Ripard
2019-12-15 16:59 ` [PATCH 12/14] [DO NOT MERGE] ARM: dts: sun4i: cubieboard: Enable OV7670 camera on CSI1 Chen-Yu Tsai
2019-12-15 16:59 ` [PATCH 13/14] [DO NOT MERGE] ARM: dts: sun7i: cubieboard2: " Chen-Yu Tsai
2019-12-15 16:59 ` [PATCH 14/14] [DO NOT MERGE] ARM: dts: sun8i-r40: bananapi-m2-ultra: Enable OV5640 camera Chen-Yu Tsai
2020-01-01 10:20 ` [PATCH 00/14] media: sun4i-csi: A10/A20 CSI1 and R40 CSI0 support Chen-Yu Tsai

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).