Re: [PATCH v6 1/5] dt-bindings: media: Add Allwinner A10 CSI binding

[Chen-Yu Tsai <wens@csie.org>]

Hi,

Sorry for chiming in so late.

On Thu, Jul 11, 2019 at 8:15 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> The Allwinner A10 CMOS Sensor Interface is a camera capture interface also
> used in later (A10s, A13, A20, R8 and GR8) SoCs.
>
> On some SoCs, like the A10, there's multiple instances of that controller,
> with one instance supporting more channels and having an ISP.
>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
> ---
>  Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml | 94 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 94 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
> new file mode 100644
> index 000000000000..97c9fc3b5050
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
> @@ -0,0 +1,94 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/arm/allwinner,sun4i-a10-csi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Allwinner A10 CMOS Sensor Interface (CSI) Device Tree Bindings
> +
> +maintainers:
> +  - Chen-Yu Tsai <wens@csie.org>
> +  - Maxime Ripard <maxime.ripard@bootlin.com>
> +
> +description: |-
> +  The Allwinner A10 and later has a CMOS Sensor Interface to retrieve
> +  frames from a parallel or BT656 sensor.
> +
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - enum:
> +              - allwinner,sun7i-a20-csi0
> +          - const: allwinner,sun4i-a10-csi0

CSI0 on the A10 has an ISP. Do we know if the one in the A20 does
as well? It certainly doesn't say so in the user manual. If not,
then we can't claim that A20 CSI0 is compatible with A10 CSI0.

> +
> +      - items:
> +          - const: allwinner,sun4i-a10-csi0
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: The CSI interface clock
> +      - description: The CSI module clock
> +      - description: The CSI ISP clock
> +      - description: The CSI DRAM clock
> +
> +  clock-names:
> +    items:
> +      - const: bus
> +      - const: mod

I doubt this actually is a module clock. Based on the usage in your
device tree patch, and the csi driver in the old linux-sunxi kernel,
the clock rate is set to 24 MHz, or whatever the sensor requires for
MCLK.

ChenYu

> +      - const: isp
> +      - const: ram
> +
> +  resets:
> +    description: The reset line driver this IP
> +    maxItems: 1
> +
> +  pinctrl-0:
> +    minItems: 1
> +
> +  pinctrl-names:
> +    const: default
> +
> +  port:
> +    type: object
> +    additionalProperties: false
> +
> +    properties:
> +      endpoint:
> +        properties:
> +          bus-width:
> +            const: 8
> +            description: Number of data lines actively used.
> +
> +          data-active: true
> +          hsync-active: true
> +          pclk-sample: true
> +          remote-endpoint: true
> +          vsync-active: true
> +
> +        required:
> +          - bus-width
> +          - data-active
> +          - hsync-active
> +          - pclk-sample
> +          - remote-endpoint
> +          - vsync-active
> +
> +    required:
> +      - endpoint
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +
> +additionalProperties: false
> +...
> --
> git-series 0.9.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel