Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Chen-Yu Tsai <wens@kernel.org>
To: "Johan Jonker" <jbx6244@gmail.com>, "Heiko Stübner" <heiko@sntech.de>
Cc: Rob Herring <robh+dt@kernel.org>,
	"open list:ARM/Rockchip SoC..."
	<linux-rockchip@lists.infradead.org>,
	Chen-Yu Tsai <wens@kernel.org>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 1/6] arm64: dts: rockchip: rk3399-roc-pc: Fix MMC numbering for LED triggers
Date: Mon, 30 Mar 2020 00:36:37 +0800
Message-ID: <CAGb2v65ayZwN14S-Pzu2ip1K=fgzTbNB=ZzUcpou-jtv8m6vBA@mail.gmail.com> (raw)
In-Reply-To: <684a08e6-7dfe-4cb1-2ae5-c1fb4128976b@gmail.com>

On Fri, Mar 27, 2020 at 5:58 PM Johan Jonker <jbx6244@gmail.com> wrote:
>
> Hi Chen-Yu Tsai,
>
> The led node names need some changes.
> 'linux,default-trigger' value does not fit.
>
> From leds-gpio.yaml:
>
> patternProperties:
>   # The first form is preferred, but fall back to just 'led' anywhere in the
>   # node name to at least catch some child nodes.
>   "(^led-[0-9a-f]$|led)":
>     type: object
>
> Rename led nodenames to 'led-0' form
>
> Also include all mail lists found with:
> ./scripts/get_maintainer.pl --nogit-fallback --nogit
>
> devicetree@vger.kernel.org

Oops...

> If you like change the rest of dts with leds as well...
>
>   DTC     arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml
>   CHECK   arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml
> arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml: leds:
> yellow-led:linux,default-trigger:0: 'mmc0' is not one of ['backlight',
> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
> arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml: leds:
> diy-led:linux,default-trigger:0: 'mmc1' is not one of ['backlight',
> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
>   DTC     arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml
>   CHECK   arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml
> arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml: leds:
> diy-led:linux,default-trigger:0: 'mmc2' is not one of ['backlight',
> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
> arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml: leds:
> yellow-led:linux,default-trigger:0: 'mmc1' is not one of ['backlight',
> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']

Maybe we should just get rid of linux,default-trigger then?

Heiko?

ChenYu

> make -k ARCH=arm64 dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/leds-gpio.yaml
>
> > From: Chen-Yu Tsai <wens@csie.org>
> >
> > With SDIO now enabled, the numbering of the existing MMC host controllers
> > gets incremented by 1, as the SDIO host is the first one.
> >
> > Increment the numbering of the MMC LED triggers to match.
> >
> > Fixes: cf3c5397835f ("arm64: dts: rockchip: Enable sdio0 and uart0 on rk3399-roc-pc-mezzanine")
> > Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> > ---
> >  arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts | 8 ++++++++
> >  arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi          | 4 ++--
> >  2 files changed, 10 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
> > index 2acb3d500fb9..f0686fc276be 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
> > +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
> > @@ -38,6 +38,10 @@ vcc3v3_pcie: vcc3v3-pcie {
> >       };
> >  };
> >
> > +&diy_led {
> > +     linux,default-trigger = "mmc2";
> > +};
> > +
> >  &pcie_phy {
> >       status = "okay";
> >  };
> > @@ -91,3 +95,7 @@ &uart0 {
> >       pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
> >       status = "okay";
> >  };
> > +
> > +&yellow_led {
> > +     linux,default-trigger = "mmc1";
> > +};
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> > index 9f225e9c3d54..bc060ac7972d 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> > +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> > @@ -70,14 +70,14 @@ work-led {
> >                       linux,default-trigger = "heartbeat";
> >               };
> >
> > -             diy-led {
> > +             diy_led: diy-led {
> >                       label = "red:diy";
> >                       gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
> >                       default-state = "off";
> >                       linux,default-trigger = "mmc1";
> >               };
> >
> > -             yellow-led {
> > +             yellow_led: yellow-led {
> >                       label = "yellow:yellow-led";
> >                       gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
> >                       default-state = "off";
> > --
> > 2.25.1
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply index

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-27  3:04 [PATCH 0/6] arm64: dts: rockchip: misc. cleanups Chen-Yu Tsai
2020-03-27  3:04 ` [PATCH 1/6] arm64: dts: rockchip: rk3399-roc-pc: Fix MMC numbering for LED triggers Chen-Yu Tsai
2020-03-27  9:58   ` Johan Jonker
2020-03-29 16:36     ` Chen-Yu Tsai [this message]
2020-03-31 11:07       ` Robin Murphy
2020-04-01 20:05         ` Jacek Anaszewski
2020-04-06  9:13         ` Pavel Machek
2020-04-13  5:33           ` Chen-Yu Tsai
2020-03-27  3:04 ` [PATCH 2/6] arm64: dts: rockchip: rk3328: Replace RK805 PMIC node name with "pmic" Chen-Yu Tsai
2020-03-27 12:12   ` Johan Jonker
2020-03-27 12:15     ` Chen-Yu Tsai
2020-03-27  3:04 ` [PATCH 3/6] arm64: dts: rockchip: rk3328: drop non-existent gmac2phy pinmux options Chen-Yu Tsai
2020-03-27  3:04 ` [PATCH 4/6] arm64: dts: rockchip: rk3328: drop #address-cells, #size-cells from grf node Chen-Yu Tsai
2020-03-27  3:04 ` [PATCH 5/6] arm64: dts: rockchip: rk3399: drop #address-cells, #size-cells from pmugrf node Chen-Yu Tsai
2020-03-27  3:04 ` [PATCH 6/6] arm64: dts: rockchip: rk3399: Rename dwc3 device nodes to make dtc happy Chen-Yu Tsai
2020-04-19 11:36 ` [PATCH 0/6] arm64: dts: rockchip: misc. cleanups Heiko Stuebner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAGb2v65ayZwN14S-Pzu2ip1K=fgzTbNB=ZzUcpou-jtv8m6vBA@mail.gmail.com' \
    --to=wens@kernel.org \
    --cc=heiko@sntech.de \
    --cc=jbx6244@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git