From mboxrd@z Thu Jan  1 00:00:00 1970
From: wens@csie.org (Chen-Yu Tsai)
Date: Sun, 8 Mar 2015 10:40:46 +0800
Subject: [linux-sunxi] [PATCH 6/7] ARM: dts: sun7i: Add OOB irq support to
 boards with broadcom sdio wifi
In-Reply-To: <1425754884-7875-6-git-send-email-hdegoede@redhat.com>
References: <1425754884-7875-1-git-send-email-hdegoede@redhat.com>
 <1425754884-7875-6-git-send-email-hdegoede@redhat.com>
Message-ID: <CAGb2v65sxMxfk3yy_ACZRXMz=wX1J0vZy8-n2UNT+T1BvMn1vw@mail.gmail.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hi,

On Sun, Mar 8, 2015 at 3:01 AM, Hans de Goede <hdegoede@redhat.com> wrote:
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>  arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 11 +++++++++++
>  arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts  | 11 +++++++++++
>  2 files changed, 22 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
> index 0c219a4..8111b0c 100644
> --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
> @@ -167,12 +167,23 @@
>  };
>
>  &mmc3 {
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +
>         pinctrl-names = "default";
>         pinctrl-0 = <&mmc3_pins_a>;
>         vmmc-supply = <&reg_vmmc3>;
>         bus-width = <4>;
>         non-removable;
>         status = "okay";
> +
> +       brcmf: bcrmf at 1 {
> +               reg = <1>;
> +               compatible = "brcm,bcm4329-fmac";
> +               interrupt-parent = <&pio>;
> +               interrupts = <10 8>; /* PH10 / EINT10 */
                                   ^ IRQ_TYPE_LEVEL_LOW?

> +               interrupt-names = "host-wake";
> +       };
>  };
>
>  &mmc3_pins_a {
> diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
> index baee563..4a8defd 100644
> --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
> @@ -164,12 +164,23 @@
>  };
>
>  &mmc3 {
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +
>         pinctrl-names = "default";
>         pinctrl-0 = <&mmc3_pins_a>;
>         vmmc-supply = <&reg_vmmc3>;
>         bus-width = <4>;
>         non-removable;
>         status = "okay";
> +
> +       brcmf: bcrmf at 1 {
> +               reg = <1>;
> +               compatible = "brcm,bcm4329-fmac";
> +               interrupt-parent = <&pio>;
> +               interrupts = <10 8>; /* PH10 / EINT10 */

Same here.

ChenYu

> +               interrupt-names = "host-wake";
> +       };
>  };
>
>  &mmc3_pins_a {