From: Amit Kucheria <amit.kucheria@linaro.org>
To: Guillaume La Roque <glaroque@baylibre.com>
Cc: "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
Linux PM list <linux-pm@vger.kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
LKML <linux-kernel@vger.kernel.org>,
Eduardo Valentin <edubezval@gmail.com>,
linux-amlogic@lists.infradead.org,
Zhang Rui <rui.zhang@intel.com>,
lakml <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v7 6/7] arm64: dts: amlogic: g12b: add cooling properties
Date: Wed, 16 Oct 2019 14:38:39 +0530 [thread overview]
Message-ID: <CAHLCerOcHoMLc8kjBvG3ssiro31sr2Fsv5dGscqCTD72xdaLMQ@mail.gmail.com> (raw)
In-Reply-To: <20191004090114.30694-7-glaroque@baylibre.com>
On Fri, Oct 4, 2019 at 2:31 PM Guillaume La Roque <glaroque@baylibre.com> wrote:
>
> Add missing #colling-cells field for G12B SoC
> Add cooling-map for passive and hot trip point
>
> Tested-by: Christian Hewitt <christianshewitt@gmail.com>
> Tested-by: Kevin Hilman <khilman@baylibre.com>
> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
> arch/arm64/boot/dts/amlogic/meson-g12b.dtsi | 29 +++++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
> index 98ae8a7c8b41..4bb89bce758f 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
> @@ -49,6 +49,7 @@
> reg = <0x0 0x0>;
> enable-method = "psci";
> next-level-cache = <&l2>;
> + #cooling-cells = <2>;
> };
>
> cpu1: cpu@1 {
> @@ -57,6 +58,7 @@
> reg = <0x0 0x1>;
> enable-method = "psci";
> next-level-cache = <&l2>;
> + #cooling-cells = <2>;
> };
>
> cpu100: cpu@100 {
> @@ -65,6 +67,7 @@
> reg = <0x0 0x100>;
> enable-method = "psci";
> next-level-cache = <&l2>;
> + #cooling-cells = <2>;
> };
>
> cpu101: cpu@101 {
> @@ -73,6 +76,7 @@
> reg = <0x0 0x101>;
> enable-method = "psci";
> next-level-cache = <&l2>;
> + #cooling-cells = <2>;
> };
>
> cpu102: cpu@102 {
> @@ -81,6 +85,7 @@
> reg = <0x0 0x102>;
> enable-method = "psci";
> next-level-cache = <&l2>;
> + #cooling-cells = <2>;
> };
>
> cpu103: cpu@103 {
> @@ -89,6 +94,7 @@
> reg = <0x0 0x103>;
> enable-method = "psci";
> next-level-cache = <&l2>;
> + #cooling-cells = <2>;
> };
>
> l2: l2-cache0 {
> @@ -219,3 +225,26 @@
> &sd_emmc_a {
> amlogic,dram-access-quirk;
> };
> +
> +&cpu_thermal {
> + cooling-maps {
> + map0 {
> + trip = <&cpu_passive>;
> + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + map1 {
> + trip = <&cpu_hot>;
> + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> +};
> --
> 2.17.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-10-16 9:09 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-04 9:01 [PATCH v7 0/7] Add support of New Amlogic temperature sensor for G12 SoCs Guillaume La Roque
2019-10-04 9:01 ` [PATCH v7 1/7] dt-bindings: thermal: Add DT bindings documentation for Amlogic Thermal Guillaume La Roque
2019-10-04 9:01 ` [PATCH v7 2/7] thermal: amlogic: Add thermal driver to support G12 SoCs Guillaume La Roque
2019-10-04 9:01 ` [PATCH v7 3/7] arm64: dts: amlogic: g12: add temperature sensor Guillaume La Roque
2019-10-04 9:01 ` [PATCH v7 4/7] arm64: dts: meson: g12: Add minimal thermal zone Guillaume La Roque
2019-10-15 23:20 ` Amit Kucheria
2019-10-16 9:00 ` guillaume La Roque
2019-10-16 9:08 ` Amit Kucheria
2019-10-16 16:42 ` Kevin Hilman
2019-10-17 16:35 ` Kevin Hilman
2019-10-04 9:01 ` [PATCH v7 5/7] arm64: dts: amlogic: g12a: add cooling properties Guillaume La Roque
2019-10-16 9:09 ` Amit Kucheria
2019-10-04 9:01 ` [PATCH v7 6/7] arm64: dts: amlogic: g12b: " Guillaume La Roque
2019-10-16 9:08 ` Amit Kucheria [this message]
2019-10-04 9:01 ` [PATCH v7 7/7] MAINTAINERS: add entry for Amlogic Thermal driver Guillaume La Roque
2019-10-16 16:39 ` [PATCH v7 0/7] Add support of New Amlogic temperature sensor for G12 SoCs Kevin Hilman
2019-10-16 16:45 ` Daniel Lezcano
2019-10-17 15:43 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAHLCerOcHoMLc8kjBvG3ssiro31sr2Fsv5dGscqCTD72xdaLMQ@mail.gmail.com \
--to=amit.kucheria@linaro.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=glaroque@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).