Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>,
	Shawn Guo <shawnguo@kernel.org>, Chris Healy <cphealy@gmail.com>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
	linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 1/3] ARM: dts: imx6: rdu2: Add node for UCS1002 USB charger chip
Date: Wed, 22 May 2019 10:49:57 -0700
Message-ID: <CAHQ1cqHxhafgsnt6O9G6iVFjbh0+HNPKrFq6UO2hbXcU2t28aw@mail.gmail.com> (raw)
In-Reply-To: <1558517848.2624.34.camel@pengutronix.de>

On Wed, May 22, 2019 at 2:37 AM Lucas Stach <l.stach@pengutronix.de> wrote:
>
> Hi Andrey,
>
> Am Mittwoch, den 22.05.2019, 00:12 -0700 schrieb Andrey Smirnov:
> > Add node for UCS1002 USB charger chip connected to front panel USB and
> > replace "regulator-fixed" previously used to control VBUS.
>
> I've had a similar version of this patch, but also added GPIO hogs for
> the UCS1002 configuration pins, so the device is put into the expected
> state even before driver load. Maybe something worth to consider?

Makes sense, will add in v2.

Thanks,
Andrey Smirnov

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply index

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-22  7:12 Andrey Smirnov
2019-05-22  7:12 ` [PATCH 2/3] ARM: dts: imx6: rdu2: Disable WP for USDHC2 and USDHC3 Andrey Smirnov
2019-05-23  0:27   ` Chris Healy
2019-05-22  7:12 ` [PATCH 3/3] ARM: dts: imx6: rdu2: Limit USBH1 to Full Speed Andrey Smirnov
2019-05-22  9:33   ` Lucas Stach
2019-05-22 17:56     ` Andrey Smirnov
2019-05-22 18:10       ` Chris Healy
2019-05-22  9:37 ` [PATCH 1/3] ARM: dts: imx6: rdu2: Add node for UCS1002 USB charger chip Lucas Stach
2019-05-22 17:49   ` Andrey Smirnov [this message]
2019-05-29  7:18 Andrey Smirnov
2019-05-29  7:22 ` Andrey Smirnov
2019-05-29  8:27 ` Lucas Stach

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAHQ1cqHxhafgsnt6O9G6iVFjbh0+HNPKrFq6UO2hbXcU2t28aw@mail.gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=cphealy@gmail.com \
    --cc=festevam@gmail.com \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git