Re: [linux-sunxi] [PATCH] ARM64: dts: allwinner: Add devicetree for pine H64 modelA evaluation board

From: "Clément Péron" <peron.clem@gmail.com>
To: clabbe.montjoie@gmail.com
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree <devicetree@vger.kernel.org>,
	linux-sunxi <linux-sunxi@googlegroups.com>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	mripard@kernel.org, Chen-Yu Tsai <wens@csie.org>,
	Rob Herring <robh+dt@kernel.org>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Subject: Re: [linux-sunxi] [PATCH] ARM64: dts: allwinner: Add devicetree for pine H64 modelA evaluation board
Date: Thu, 8 Aug 2019 16:50:35 +0200	[thread overview]
Message-ID: <CAJiuCccEQFvKemTodJbuEDzDy9j6-M4SYskxPFJ5DpsbQDnvkA@mail.gmail.com> (raw)
In-Reply-To: <20190808084253.10573-1-clabbe.montjoie@gmail.com>

Hi,

On Thu, 8 Aug 2019 at 10:42, Corentin Labbe <clabbe.montjoie@gmail.com> wrote:
>
> This patch adds the evaluation variant of the model A of the PineH64.
> The model A has the same size of the pine64 and has a PCIE slot.
>
> The only devicetree difference with current pineH64, is the PHY
> regulator.

You also need to add the board in
"Documentation/devicetree/bindings/arm/sunxi.yaml"

Regards,
Clément

>
> Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> ---
>  arch/arm64/boot/dts/allwinner/Makefile        |  1 +
>  .../sun50i-h6-pine-h64-modelA-eval.dts        | 26 +++++++++++++++++++
>  2 files changed, 27 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
>
> diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
> index f6db0611cb85..9a02166cbf72 100644
> --- a/arch/arm64/boot/dts/allwinner/Makefile
> +++ b/arch/arm64/boot/dts/allwinner/Makefile
> @@ -25,3 +25,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
> +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-modelA-eval.dtb
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
> new file mode 100644
> index 000000000000..d8ff02747efe
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
> @@ -0,0 +1,26 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +/*
> + * Copyright (C) 2019 Corentin Labbe <clabbe.montjoie@gmail.com>
> + */
> +
> +#include "sun50i-h6-pine-h64.dts"
> +
> +/ {
> +       model = "Pine H64 model A evaluation board";
> +       compatible = "pine64,pine-h64-modelA-eval", "allwinner,sun50i-h6";
> +
> +       reg_gmac_3v3: gmac-3v3 {
> +               compatible = "regulator-fixed";
> +               regulator-name = "vcc-gmac-3v3";
> +               regulator-min-microvolt = <3300000>;
> +               regulator-max-microvolt = <3300000>;
> +               startup-delay-us = <100000>;
> +               gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
> +               enable-active-high;
> +       };
> +
> +};
> +
> +&emac {
> +       phy-supply = <&reg_gmac_3v3>;
> +};
> --
> 2.21.0
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
> To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20190808084253.10573-1-clabbe.montjoie%40gmail.com.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel