Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Chuanhong Guo <gch981213@gmail.com>
To: linux-mtd@lists.infradead.org
Cc: Vignesh Raghavendra <vigneshr@ti.com>,
	Tudor Ambarus <tudor.ambarus@microchip.com>,
	Richard Weinberger <richard@nod.at>,
	open list <linux-kernel@vger.kernel.org>,
	linux-mediatek@lists.infradead.org,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2] mtd: mtk-quadspi: add support for DMA reading
Date: Sat, 15 Feb 2020 15:06:05 +0800
Message-ID: <CAJsYDVJ9JGGpDm-FWvqDsS_ffwQ4FzY_cbVFpnEKt6B_Ab=TMQ@mail.gmail.com> (raw)
In-Reply-To: <20200208084022.193231-1-gch981213@gmail.com>

Hi all!

On Sat, Feb 8, 2020 at 4:41 PM Chuanhong Guo <gch981213@gmail.com> wrote:
>
> PIO reading mode on this controller is pretty inefficient
> (one cmd+addr+dummy sequence reads only one byte)
> This patch adds support for reading using DMA mode which increases
> reading speed from 1MB/s to 4MB/s
>
> DMA busy checking is implemented with readl_poll_timeout because
> I don't have access to IRQ-related docs. The speed increment comes
> from those saved cmd+addr+dummy clocks.
>
> This controller requires that DMA source/destination address and
> reading length should be 16-byte aligned. We use a bounce buffer if
> one of them is not aligned, read more than what we need, and copy
> data from corresponding buffer offset.
>
> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>

This patch is deprecated. I wrote a new spi-mem driver for this
controller:
https://patchwork.ozlabs.org/project/linux-mtd/list/?series=158701
and will be focus on getting that one merged instead.
-- 
Regards,
Chuanhong Guo

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

      parent reply index

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-08  8:40 Chuanhong Guo
2020-02-10  8:30 ` Yingjoe Chen
2020-02-11  6:55   ` Chuanhong Guo
2020-02-15  7:06 ` Chuanhong Guo [this message]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAJsYDVJ9JGGpDm-FWvqDsS_ffwQ4FzY_cbVFpnEKt6B_Ab=TMQ@mail.gmail.com' \
    --to=gch981213@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=tudor.ambarus@microchip.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git