Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Jagan Teki <jagan@amarulasolutions.com>
To: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree <devicetree@vger.kernel.org>,
	David Airlie <airlied@linux.ie>,
	Michael Turquette <mturquette@baylibre.com>,
	linux-sunxi <linux-sunxi@googlegroups.com>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	dri-devel <dri-devel@lists.freedesktop.org>,
	Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>,
	Daniel Vetter <daniel@ffwll.ch>,
	Michael Trimarchi <michael@amarulasolutions.com>,
	linux-amarula <linux-amarula@amarulasolutions.com>,
	linux-clk <linux-clk@vger.kernel.org>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v6 11/22] clk: sunxi-ng: a64: Add minimum rate for PLL_MIPI
Date: Thu, 20 Jun 2019 23:57:44 +0530
Message-ID: <CAMty3ZB45cHx3WeXnywBh2_UA_bTmFs6yBTqLWA1BNf4fQtVvQ@mail.gmail.com> (raw)
In-Reply-To: <20190614142406.ybdiqfppo5mc5bgq@flea>

On Fri, Jun 14, 2019 at 7:54 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> On Wed, Jun 05, 2019 at 01:03:16PM +0530, Jagan Teki wrote:
> > On Wed, Jun 5, 2019 at 12:19 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> > >
> > > Hi,
> > >
> > > I've reordered the mail a bit to work on chunks
> > >
> > > On Fri, May 24, 2019 at 03:37:42PM +0530, Jagan Teki wrote:
> > > > > I wish it was in your commit log in the first place, instead of having
> > > > > to exchange multiple mails over this.
> > > > >
> > > > > However, I don't think that's quite true, and it might be a bug in
> > > > > Allwinner's implementation (or rather something quite confusing).
> > > > >
> > > > > You're right that the lcd_rate and pll_rate seem to be generated from
> > > > > the pixel clock, and it indeed looks like the ratio between the pixel
> > > > > clock and the TCON dotclock is defined through the number of bits per
> > > > > lanes.
> > > > >
> > > > > However, in this case, dsi_rate is actually the same than lcd_rate,
> > > > > since pll_rate is going to be divided by dsi_div:
> > > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/disp_lcd.c#L791
> > > > >
> > > > > Since lcd_div is 1, it also means that in this case, dsi_rate ==
> > > > > dclk_rate.
> > > > >
> > > > > The DSI module clock however, is always set to 148.5 MHz. Indeed, if
> > > > > we look at:
> > > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/disp_lcd.c#L804
> > > > >
> > > > > We can see that the rate in clk_info is used if it's different than
> > > > > 0. This is filled by disp_al_lcd_get_clk_info, which, in the case of a
> > > > > DSI panel, will hardcode it to 148.5 MHz:
> > > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/disp_al.c#L164
> > > >
> > > > Let me explain, something more.
> > > >
> > > > According to bsp there are clk_info.tcon_div which I will explain below.
> > > > clk_info.dsi_div which is dynamic and it depends on bpp/lanes, so it
> > > > is 6 for 24bpp and 4 lanes devices.
> > > >
> > > > PLL rate here depends on dsi_div (not tcon_div)
> > > >
> > > > Code here
> > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/disp_lcd.c#L784
> > > >
> > > > is computing the actual set rate, which depends on dsi_rate.
> > > >
> > > > lcd_rate = dclk_rate * clk_info.dsi_div;
> > > > dsi_rate = pll_rate / clk_info.dsi_div;
> > > >
> > > > Say if the dclk_rate 148MHz then the dsi_rate is 888MHz which set rate
> > > > for above link you mentioned.
> > > >
> > > > Here are the evidence with some prints.
> > > >
> > > > https://gist.github.com/openedev/9bae2d87d2fcc06b999fe48c998b7043
> > > > https://gist.github.com/openedev/700de2e3701b2bf3ad1aa0f0fa862c9a
> > >
> > > Ok, so we agree up to this point, and the prints confirm that the
> > > analysis above is the right one.
> > >
> > > > > So, the DSI clock is set to this here:
> > > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/disp_lcd.c#L805
> > >
> > > Your patch doesn't address that, so let's leave that one alone.
> >
> > Basically this is final pll set rate when sun4i_dotclock.c called the
> > desired rate with ccu_nkm.c so it ended the final rate with parent as
> > Line 8 of
> > https://gist.github.com/openedev/700de2e3701b2bf3ad1aa0f0fa862c9a
>
> If that's important to the driver, it should be set explicitly then,
> and not work by accident.
>
> > > > > The TCON *module* clock (the one in the clock controller) has been set
> > > > > to lcd_rate (so the pixel clock times the number of bits per lane) here:
> > > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/disp_lcd.c#L800
> > > > >
> > > > > And the PLL has been set to the same rate here:
> > > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/disp_lcd.c#L794
> > > > >
> > > > > Let's take a step back now: that function we were looking at,
> > > > > lcd_clk_config, is called by lcd_clk_enable, which is in turn called
> > > > > by disp_lcd_enable here:
> > > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/disp_lcd.c#L1328
> > > > >
> > > > > The next function being called is disp_al_lcd_cfg, and that function
> > > > > will hardcode the TCON dotclock divider to 4, here:
> > > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/disp_al.c#L240
> > > >
> > > > tcon_div from BSP point-of-view of there are two variants
> > > > 00) clk_info.tcon_div which is 4 and same is set the divider position
> > > > in SUN4I_TCON0_DCLK_REG (like above link refer)
> > > > 01) tcon_div which is 4 and used for edge timings computation
> > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c#L12
> > > >
> > > > The real reason for 01) is again 4 is they set the divider to 4 in 00)
> > > > which is technically wrong because the dividers which used during
> > > > dotclock in above (dsi_div) should be used here as well. Since there
> > > > is no dynamic way of doing this BSP hard-coding these values.
> > > >
> > > > Patches 5,6,7 on this series doing this
> > > > https://patchwork.freedesktop.org/series/60847/
> > > >
> > > > Hope this explanation helps?
> > >
> > > It doesn't.
> > >
> > > The clock tree is this one:
> > >
> > > PLL(s) -> TCON module clock -> TCON dotclock.
> > >
> > > The links I mentioned above show that the clock set to lcd_rate is the
> > > TCON module clocks (and it should be the one taking the bpp and lanes
> > > into account), while the TCON dotclock uses a fixed divider of 4.
> >
> > Sorry, I can argue much other-than giving some code snips, according to [1]
> >
> > 00) Line 785, 786 with dclk_rate 148000000
> >
> > lcd_rate = dclk_rate * clk_info.dsi_div;
> > pll_rate = lcd_rate * clk_info.lcd_div;
> >
> > Since dsi_div is 6 (bpp/lanes), lcd_div 1
> >
> > lcd_rate = 888000000, pll_rate = 888000000
> >
> > 01)  Line 801, 804 are final rates computed as per clock driver (say
> > ccu_nkm in mainline)
> >
> > lcd_rate_set=891000000
> >
> > As per your comments if it would be 4 then the desired numbers are
> > would be 592000000 not 888000000.
> >
> > This is what I'm trying to say in all mails, and same as verified with
> > 2-lanes devices as well where the dsi_div is 12 so the final rate is
> > 290MHz * 12
>
> In the code you sent, you're forcing a divider on the internal TCON
> clock, while that one is fixed in the BSP.
>
> There's indeed the bpp / lanes divider, but it's used in the *parent*
> clock of the one you're changing.
>
> And the dsi0_clk clock you pointed out in the code snippet is yet
> another clock, the MIPI DSI module clock.

Correct, look like I refereed wrong reference in the above mail. sorry
for the noise.

Actually I'm trying to explain about pll_rate here which indeed
depends on dsi.div
https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/disp_lcd.c#L786

lcd_rate = dclk_rate * clk_info.dsi_div;
pll_rate = lcd_rate * clk_info.lcd_div;

Say

1) For 148MHz dclk_rate with dsi_div is 6 (24/4) lcd_div is 1 which
resulting pll_rate is 888MHz.

2) For 30MHz dclk_rate with 4 lane and 24 RGB the resulting pll_rate is 180MHz

3) For 27.5MHz dclk_rate with 2 lane and 24 RGB the resulting pll_rate is 330MHz

Here is the few more logs in code, for case 2)

[    1.920441] sun4i_dclk_round_rate: min_div = 6 max_div = 6, rate = 30000000
[    1.920505] ideal = 180000000, rounded = 178200000
[    1.920509] sun4i_dclk_round_rate: div = 6 rate = 29700000
[    1.920514] sun4i_dclk_round_rate: min_div = 6 max_div = 6, rate = 30000000
[    1.920532] ideal = 180000000, rounded = 178200000
[    1.920535] sun4i_dclk_round_rate: div = 6 rate = 29700000
[    1.920572] sun4i_dclk_recalc_rate: val = 1, rate = 178200000
[    1.920576] sun4i_dclk_recalc_rate: val = 1, rate = 178200000
[    1.920597] rate = 178200000
[    1.920599] parent_rate = 297000000
[    1.920602] reg = 0x90c00000
[    1.920605] _nkm.n = 3, nkm->n.offset = 0x1, nkm->n.shift = 8
[    1.920609] _nkm.k = 2, nkm->k.offset = 0x1, nkm->k.shift = 4
[    1.920612] _nkm.m = 10, nkm->m.offset = 0x1, nkm->m.shift = 0
[    1.920958] sun4i_dclk_set_rate div 6
[    1.920966] sun4i_dclk_recalc_rate: val = 6, rate = 29700000

and clk_summary:

    pll-video0                        1        1        1   297000000
        0     0  50000
       hdmi                           0        0        0   297000000
        0     0  50000
       tcon1                          0        0        0   297000000
        0     0  50000
       pll-mipi                       1        1        1   178200000
        0     0  50000
          tcon0                       2        2        1   178200000
        0     0  50000
             tcon-pixel-clock         1        1        1    29700000
        0     0  50000
       pll-video0-2x                  0        0        0   594000000
        0     0  50000

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply index

Thread overview: 66+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-24 19:58 [PATCH v6 00/22] drm/sun4i: Allwinner A64 MIPI-DSI support Jagan Teki
2019-01-24 19:58 ` [PATCH v6 01/22] drm/sun4i: sun6i_mipi_dsi: Compute burst mode loop N1 instruction delay Jagan Teki
2019-01-24 19:58 ` [PATCH v6 02/22] drm/sun4i: sun6i_mipi_dsi: Support instruction loop selection Jagan Teki
2019-01-24 19:58 ` [PATCH v6 03/22] drm/sun4i: sun6i_mipi_dsi: Setup burst mode timings Jagan Teki
2019-01-24 19:58 ` [PATCH v6 04/22] drm/sun4i: sun6i_mipi_dsi: Simplify drq to support all modes Jagan Teki
2019-01-24 19:58 ` [PATCH v6 05/22] drm/sun4i: tcon: Export get tcon0 routine Jagan Teki
2019-01-24 19:58 ` [PATCH v6 06/22] drm/sun4i: sun6i_mipi_dsi: Probe tcon0 during dsi_bind Jagan Teki
2019-01-24 19:58 ` [PATCH v6 07/22] drm/sun4i: sun6i_mipi_dsi: Setup burst mode Jagan Teki
2019-01-24 19:58 ` [PATCH v6 08/22] drm/sun4i: sun6i_mipi_dsi: Enable 2byte trail for 4-lane " Jagan Teki
2019-01-24 19:58 ` [PATCH v6 09/22] drm/sun4i: sun6i_mipi_dsi: Enable burst mode HBP, HSA_HSE Jagan Teki
2019-01-24 19:58 ` [PATCH v6 10/22] clk: sunxi-ng: Add check for minimal rate to NKM PLLs Jagan Teki
2019-01-24 19:58 ` [PATCH v6 11/22] clk: sunxi-ng: a64: Add minimum rate for PLL_MIPI Jagan Teki
2019-01-25 21:24   ` Maxime Ripard
2019-01-28  9:36     ` Jagan Teki
2019-01-29 15:13       ` Maxime Ripard
2019-01-29 17:31         ` Jagan Teki
2019-02-01 14:31           ` Maxime Ripard
2019-02-01 16:33             ` Jagan Teki
2019-02-11 14:07             ` Jagan Teki
2019-02-12  9:30               ` Maxime Ripard
2019-02-12  9:38                 ` Jagan Teki
2019-05-24 10:07             ` Jagan Teki
2019-06-05  6:49               ` Maxime Ripard
2019-06-05  7:33                 ` Jagan Teki
2019-06-14 14:24                   ` Maxime Ripard
2019-06-20 18:27                     ` Jagan Teki [this message]
2019-06-25 14:49                       ` Maxime Ripard
2019-06-25 15:30                         ` Jagan Teki
2019-07-03 11:49                           ` Maxime Ripard
2019-07-05 17:52                             ` Michael Nazzareno Trimarchi
2019-07-11 10:01                               ` Maxime Ripard
2019-07-11 17:43                                 ` Michael Nazzareno Trimarchi
2019-07-11 19:34                                   ` Michael Nazzareno Trimarchi
2019-07-20  6:58                                   ` Maxime Ripard
2019-07-20  7:16                                     ` Jagan Teki
2019-07-20  7:34                                       ` Jagan Teki
2019-07-20  9:32                                       ` Maxime Ripard
2019-07-20  9:42                                         ` Michael Nazzareno Trimarchi
2019-07-22 10:21                                         ` Jagan Teki
2019-07-22 10:25                                           ` Michael Nazzareno Trimarchi
2019-07-22 10:38                                             ` Jagan Teki
2019-07-24  9:05                                           ` Maxime Ripard
2019-07-29  6:59                                             ` Michael Nazzareno Trimarchi
2019-08-02  8:38                                               ` Michael Nazzareno Trimarchi
2019-08-13  6:05                                               ` Maxime Ripard
2019-08-15 12:25                                                 ` Michael Nazzareno Trimarchi
2019-08-28 13:03                                                   ` Maxime Ripard
2019-08-28 13:09                                                     ` Michael Nazzareno Trimarchi
2019-01-24 19:58 ` [PATCH v6 12/22] dt-bindings: sun6i-dsi: Add VCC-DSI supply property Jagan Teki
2019-01-25 15:47   ` Maxime Ripard
2019-01-24 19:58 ` [PATCH v6 13/22] drm/sun4i: sun6i_mipi_dsi: Add support for VCC-DSI voltage regulator Jagan Teki
2019-01-24 19:58 ` [PATCH v6 14/22] dt-bindings: sun6i-dsi: Add A64 DSI compatible (w/ A31 fallback) Jagan Teki
2019-01-25 15:52   ` Maxime Ripard
2019-01-26 16:09     ` [linux-sunxi] " Jagan Teki
2019-01-29 14:54       ` Maxime Ripard
2019-01-24 19:58 ` [PATCH v6 15/22] dt-bindings: sun6i-dsi: Add A64 DPHY " Jagan Teki
2019-01-25 15:52   ` Maxime Ripard
2019-01-24 19:58 ` [PATCH v6 16/22] arm64: dts: allwinner: a64: Add DSI pipeline Jagan Teki
2019-01-25 18:51   ` Maxime Ripard
2019-01-24 19:58 ` [DO NOT MERGE] [PATCH v6 17/22] arm64: allwinner: a64: pine64-lts: Enable Feiyang FY07024DI26A30-D DSI panel Jagan Teki
2019-01-24 19:58 ` [PATCH v6 18/22] drm/sun4i: sun6i_mipi_dsi: Add DSI Generic short write 2 param transfer Jagan Teki
2019-01-24 19:58 ` [DO NOT MERGE] [PATCH v6 19/22] arm64: dts: allwinner: bananapi-m64: Bananapi S070WV20-CT16 DSI panel Jagan Teki
2019-01-24 19:58 ` [PATCH v6 20/22] drm/sun4i: sun6i_mipi_dsi: Fix DSI hbp timing value Jagan Teki
2019-01-24 19:58 ` [PATCH v6 21/22] drm/sun4i: sun6i_mipi_dsi: Fix DSI hfp " Jagan Teki
2019-01-24 19:59 ` [PATCH v6 22/22] arm64: dts: allwinner: a64-amarula-relic: Add Techstar TS8550B MIPI-DSI panel Jagan Teki
2019-01-24 23:12 ` [PATCH v6 00/22] drm/sun4i: Allwinner A64 MIPI-DSI support Merlijn Wajer

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAMty3ZB45cHx3WeXnywBh2_UA_bTmFs6yBTqLWA1BNf4fQtVvQ@mail.gmail.com \
    --to=jagan@amarulasolutions.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-amarula@amarulasolutions.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=michael@amarulasolutions.com \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git