Linux-ARM-Kernel Archive on lore.kernel.org
 help / Atom feed
* [PATCH 0/4] Add new device nodes for Spreadtrum SC9860 platform
@ 2019-01-21  7:38 Baolin Wang
  2019-01-21  7:38 ` [PATCH 1/4] arm64: dts: sprd: Remove PMIC INTC irq trigger type Baolin Wang
                   ` (4 more replies)
  0 siblings, 5 replies; 12+ messages in thread
From: Baolin Wang @ 2019-01-21  7:38 UTC (permalink / raw)
  To: robh+dt, mark.rutland, arnd, olof, orsonzhai, zhang.lyra
  Cc: devicetree, arm, baolin.wang, linux-kernel, broonie, linux-arm-kernel

This patch set adds charger and fuel gauge device nodes for Spreadtrum
SC2731 PMIC, it also removes redundant irq trigger setting for PMIC
devices and adds nvmem cells for ADC to calibrate the ADC channel scales.

Baolin Wang (4):
  arm64: dts: sprd: Remove PMIC INTC irq trigger type
  arm64: dts: sprd: Add ADC calibration support
  arm64: dts: sprd: Add SC2731 charger device
  arm64: dts: sprd: Add SC27XX fuel gauge device

 arch/arm64/boot/dts/sprd/sc2731.dtsi      |   42 ++++++++++++++++++++++++++---
 arch/arm64/boot/dts/sprd/sp9860g-1h10.dts |   16 +++++++++++
 2 files changed, 54 insertions(+), 4 deletions(-)

-- 
1.7.9.5


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH 1/4] arm64: dts: sprd: Remove PMIC INTC irq trigger type
  2019-01-21  7:38 [PATCH 0/4] Add new device nodes for Spreadtrum SC9860 platform Baolin Wang
@ 2019-01-21  7:38 ` Baolin Wang
  2019-01-21  7:38 ` [PATCH 2/4] arm64: dts: sprd: Add ADC calibration support Baolin Wang
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 12+ messages in thread
From: Baolin Wang @ 2019-01-21  7:38 UTC (permalink / raw)
  To: robh+dt, mark.rutland, arnd, olof, orsonzhai, zhang.lyra
  Cc: devicetree, arm, baolin.wang, linux-kernel, broonie, linux-arm-kernel

The Spreadtrum PMIC INTC controller has no registers to set trigger type,
since it is always high level trigger as default. So remove its child
devices' irq trigger type setting and change #interrupt-cells to 1.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 arch/arm64/boot/dts/sprd/sc2731.dtsi |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi
index 82bd642..f2f2aa5 100644
--- a/arch/arm64/boot/dts/sprd/sc2731.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi
@@ -13,7 +13,7 @@
 		spi-max-frequency = <26000000>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-controller;
-		#interrupt-cells = <2>;
+		#interrupt-cells = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -43,14 +43,14 @@
 			compatible = "sprd,sc27xx-rtc", "sprd,sc2731-rtc";
 			reg = <0x280>;
 			interrupt-parent = <&sc2731_pmic>;
-			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <2>;
 		};
 
 		pmic_eic: gpio@300 {
 			compatible = "sprd,sc27xx-eic";
 			reg = <0x300>;
 			interrupt-parent = <&sc2731_pmic>;
-			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <5>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -69,7 +69,7 @@
 			compatible = "sprd,sc27xx-adc", "sprd,sc2731-adc";
 			reg = <0x480>;
 			interrupt-parent = <&sc2731_pmic>;
-			interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <0>;
 			#io-channel-cells = <1>;
 			hwlocks = <&hwlock 4>;
 		};
-- 
1.7.9.5


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH 2/4] arm64: dts: sprd: Add ADC calibration support
  2019-01-21  7:38 [PATCH 0/4] Add new device nodes for Spreadtrum SC9860 platform Baolin Wang
  2019-01-21  7:38 ` [PATCH 1/4] arm64: dts: sprd: Remove PMIC INTC irq trigger type Baolin Wang
@ 2019-01-21  7:38 ` Baolin Wang
  2019-01-21  7:38 ` [PATCH 3/4] arm64: dts: sprd: Add SC2731 charger device Baolin Wang
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 12+ messages in thread
From: Baolin Wang @ 2019-01-21  7:38 UTC (permalink / raw)
  To: robh+dt, mark.rutland, arnd, olof, orsonzhai, zhang.lyra
  Cc: devicetree, arm, baolin.wang, linux-kernel, broonie, linux-arm-kernel

This patch adds phandles to the calibration cells provided by the Efuse
device, which is used to calibrate the ADC channel scales.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 arch/arm64/boot/dts/sprd/sc2731.dtsi |   10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi
index f2f2aa5..a2edc25 100644
--- a/arch/arm64/boot/dts/sprd/sc2731.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi
@@ -63,6 +63,14 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			hwlocks = <&hwlock 12>;
+
+			adc_big_scale: calib@24 {
+				reg = <0x24 0x2>;
+			};
+
+			adc_small_scale: calib@26 {
+				reg = <0x26 0x2>;
+			};
 		};
 
 		pmic_adc: adc@480 {
@@ -72,6 +80,8 @@
 			interrupts = <0>;
 			#io-channel-cells = <1>;
 			hwlocks = <&hwlock 4>;
+			nvmem-cell-names = "big_scale_calib", "small_scale_calib";
+			nvmem-cells = <&adc_big_scale>, <&adc_small_scale>;
 		};
 
 		vibrator@ec8 {
-- 
1.7.9.5


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH 3/4] arm64: dts: sprd: Add SC2731 charger device
  2019-01-21  7:38 [PATCH 0/4] Add new device nodes for Spreadtrum SC9860 platform Baolin Wang
  2019-01-21  7:38 ` [PATCH 1/4] arm64: dts: sprd: Remove PMIC INTC irq trigger type Baolin Wang
  2019-01-21  7:38 ` [PATCH 2/4] arm64: dts: sprd: Add ADC calibration support Baolin Wang
@ 2019-01-21  7:38 ` Baolin Wang
  2019-01-30 16:45   ` Arnd Bergmann
  2019-01-21  7:38 ` [PATCH 4/4] arm64: dts: sprd: Add SC27XX fuel gauge device Baolin Wang
  2019-01-30 16:46 ` [PATCH 0/4] Add new device nodes for Spreadtrum SC9860 platform Arnd Bergmann
  4 siblings, 1 reply; 12+ messages in thread
From: Baolin Wang @ 2019-01-21  7:38 UTC (permalink / raw)
  To: robh+dt, mark.rutland, arnd, olof, orsonzhai, zhang.lyra
  Cc: devicetree, arm, baolin.wang, linux-kernel, broonie, linux-arm-kernel

Add charger device node and related battery node for SC2731 PMIC.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 arch/arm64/boot/dts/sprd/sc2731.dtsi      |    6 ++++++
 arch/arm64/boot/dts/sprd/sp9860g-1h10.dts |   16 ++++++++++++++++
 2 files changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi
index a2edc25..b52eaf0 100644
--- a/arch/arm64/boot/dts/sprd/sc2731.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi
@@ -17,6 +17,12 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		charger@0 {
+			compatible = "sprd,sc27xx-charger", "sprd,sc2731-charger";
+			reg = <0x0>;
+			monitored-battery = <&bat>;
+		};
+
 		led-controller@200 {
 			compatible = "sprd,sc27xx-bltc", "sprd,sc2731-bltc";
 			reg = <0x200>;
diff --git a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
index 3bd18e3..2a963bd 100644
--- a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
+++ b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
@@ -41,6 +41,22 @@
 		#size-cells = <2>;
 		ranges;
 	};
+
+	bat: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <1900000>;
+		charge-term-current-microamp = <120000>;
+		constant_charge_voltage_max_microvolt = <4350000>;
+		internal-resistance-micro-ohms = <250000>;
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>,
+			<4022000 85>, <3983000 80>, <3949000 75>,
+			<3917000 70>, <3889000 65>, <3864000 60>,
+			<3835000 55>, <3805000 50>, <3787000 45>,
+			<3777000 40>, <3773000 35>, <3770000 30>,
+			<3765000 25>, <3752000 20>, <3724000 15>,
+			<3680000 10>, <3605000 5>, <3400000 0>;
+	};
 };
 
 &uart0 {
-- 
1.7.9.5


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH 4/4] arm64: dts: sprd: Add SC27XX fuel gauge device
  2019-01-21  7:38 [PATCH 0/4] Add new device nodes for Spreadtrum SC9860 platform Baolin Wang
                   ` (2 preceding siblings ...)
  2019-01-21  7:38 ` [PATCH 3/4] arm64: dts: sprd: Add SC2731 charger device Baolin Wang
@ 2019-01-21  7:38 ` Baolin Wang
  2019-01-30 16:46 ` [PATCH 0/4] Add new device nodes for Spreadtrum SC9860 platform Arnd Bergmann
  4 siblings, 0 replies; 12+ messages in thread
From: Baolin Wang @ 2019-01-21  7:38 UTC (permalink / raw)
  To: robh+dt, mark.rutland, arnd, olof, orsonzhai, zhang.lyra
  Cc: devicetree, arm, baolin.wang, linux-kernel, broonie, linux-arm-kernel

Add Spreadtrum SC27XX fuel gauge device node to calculate the
battery capacity.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 arch/arm64/boot/dts/sprd/sc2731.dtsi |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi
index b52eaf0..1110d13 100644
--- a/arch/arm64/boot/dts/sprd/sc2731.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi
@@ -70,6 +70,11 @@
 			#size-cells = <1>;
 			hwlocks = <&hwlock 12>;
 
+			fgu_calib: calib@6 {
+				reg = <0x6 0x2>;
+				bits = <0 9>;
+			};
+
 			adc_big_scale: calib@24 {
 				reg = <0x24 0x2>;
 			};
@@ -90,6 +95,19 @@
 			nvmem-cells = <&adc_big_scale>, <&adc_small_scale>;
 		};
 
+		fgu@a00 {
+			compatible = "sprd,sc27xx-fgu", "sprd,sc2731-fgu";
+			reg = <0xa00>;
+			bat-detect-gpio = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;
+			io-channels = <&pmic_adc 3>, <&pmic_adc 6>;
+			io-channel-names = "bat-temp", "charge-vol";
+			monitored-battery = <&bat>;
+			nvmem-cell-names = "fgu_calib";
+			nvmem-cells = <&fgu_calib>;
+			interrupt-parent = <&sc2731_pmic>;
+			interrupts = <4>;
+		};
+
 		vibrator@ec8 {
 			compatible = "sprd,sc27xx-vibrator", "sprd,sc2731-vibrator";
 			reg = <0xec8>;
-- 
1.7.9.5


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 3/4] arm64: dts: sprd: Add SC2731 charger device
  2019-01-21  7:38 ` [PATCH 3/4] arm64: dts: sprd: Add SC2731 charger device Baolin Wang
@ 2019-01-30 16:45   ` Arnd Bergmann
  0 siblings, 0 replies; 12+ messages in thread
From: Arnd Bergmann @ 2019-01-30 16:45 UTC (permalink / raw)
  To: Baolin Wang
  Cc: Mark Rutland, DTML, arm-soc, Lyra Zhang, Mark Brown,
	Linux Kernel Mailing List, Rob Herring, Olof Johansson,
	Orson Zhai, Linux ARM

On Mon, Jan 21, 2019 at 8:39 AM Baolin Wang <baolin.wang@linaro.org> wrote:
>
> Add charger device node and related battery node for SC2731 PMIC.
>
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> ---
>  arch/arm64/boot/dts/sprd/sc2731.dtsi      |    6 ++++++
>  arch/arm64/boot/dts/sprd/sp9860g-1h10.dts |   16 ++++++++++++++++
>  2 files changed, 22 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi
> index a2edc25..b52eaf0 100644
> --- a/arch/arm64/boot/dts/sprd/sc2731.dtsi
> +++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi
> @@ -17,6 +17,12 @@
>                 #address-cells = <1>;
>                 #size-cells = <0>;
>
> +               charger@0 {
> +                       compatible = "sprd,sc27xx-charger", "sprd,sc2731-charger";
> +                       reg = <0x0>;
> +                       monitored-battery = <&bat>;
> +               };

I see some of these have already slipped through, but we should probably
fix those and not add new ones: "sprd,sc27xx-charger" is not an appropriate
compatible string, because it has a 'xx' wildcard.

What you should have instead is to list compatibility with specific older
models. You also need to have the more generic string as the last one,
not the first.

     Arnd

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 0/4] Add new device nodes for Spreadtrum SC9860 platform
  2019-01-21  7:38 [PATCH 0/4] Add new device nodes for Spreadtrum SC9860 platform Baolin Wang
                   ` (3 preceding siblings ...)
  2019-01-21  7:38 ` [PATCH 4/4] arm64: dts: sprd: Add SC27XX fuel gauge device Baolin Wang
@ 2019-01-30 16:46 ` Arnd Bergmann
  2019-02-01 12:05   ` Baolin Wang
  4 siblings, 1 reply; 12+ messages in thread
From: Arnd Bergmann @ 2019-01-30 16:46 UTC (permalink / raw)
  To: Baolin Wang
  Cc: Mark Rutland, DTML, arm-soc, Lyra Zhang, Mark Brown,
	Linux Kernel Mailing List, Rob Herring, Olof Johansson,
	Orson Zhai, Linux ARM

On Mon, Jan 21, 2019 at 8:39 AM Baolin Wang <baolin.wang@linaro.org> wrote:
>
> This patch set adds charger and fuel gauge device nodes for Spreadtrum
> SC2731 PMIC, it also removes redundant irq trigger setting for PMIC
> devices and adds nvmem cells for ADC to calibrate the ADC channel scales.
>
> Baolin Wang (4):
>   arm64: dts: sprd: Remove PMIC INTC irq trigger type
>   arm64: dts: sprd: Add ADC calibration support
>   arm64: dts: sprd: Add SC2731 charger device
>   arm64: dts: sprd: Add SC27XX fuel gauge device

I did not apply these because of the 'sc27xx' wildcard matching.

Please fix those up and resend.

      Arnd

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 0/4] Add new device nodes for Spreadtrum SC9860 platform
  2019-01-30 16:46 ` [PATCH 0/4] Add new device nodes for Spreadtrum SC9860 platform Arnd Bergmann
@ 2019-02-01 12:05   ` Baolin Wang
  2019-02-01 13:05     ` Mark Brown
  0 siblings, 1 reply; 12+ messages in thread
From: Baolin Wang @ 2019-02-01 12:05 UTC (permalink / raw)
  To: Arnd Bergmann
  Cc: Mark Rutland, DTML, arm-soc, Lyra Zhang, Mark Brown,
	Linux Kernel Mailing List, Rob Herring, Olof Johansson,
	Orson Zhai, Linux ARM

Hi Arnd,

On Thu, 31 Jan 2019 at 00:46, Arnd Bergmann <arnd@arndb.de> wrote:
>
> On Mon, Jan 21, 2019 at 8:39 AM Baolin Wang <baolin.wang@linaro.org> wrote:
> >
> > This patch set adds charger and fuel gauge device nodes for Spreadtrum
> > SC2731 PMIC, it also removes redundant irq trigger setting for PMIC
> > devices and adds nvmem cells for ADC to calibrate the ADC channel scales.
> >
> > Baolin Wang (4):
> >   arm64: dts: sprd: Remove PMIC INTC irq trigger type
> >   arm64: dts: sprd: Add ADC calibration support
> >   arm64: dts: sprd: Add SC2731 charger device
> >   arm64: dts: sprd: Add SC27XX fuel gauge device
>
> I did not apply these because of the 'sc27xx' wildcard matching.
>
> Please fix those up and resend.
>

On Spreadtrum platform, we use one mfd driver [1] to populate the
SC27XX series PMICs including SC2731, SC2721, SC2720 and SC2730. So we
use sc27xx to be compatible with different PMICs' devices, otherwise
it will be difficult to define the mfd cell arrays in mfd driver. Do
you have any good suggestion? Thanks.

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/mfd/sprd-sc27xx-spi.c

-- 
Baolin Wang
Best Regards

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 0/4] Add new device nodes for Spreadtrum SC9860 platform
  2019-02-01 12:05   ` Baolin Wang
@ 2019-02-01 13:05     ` Mark Brown
  2019-02-12  8:40       ` Baolin Wang
  0 siblings, 1 reply; 12+ messages in thread
From: Mark Brown @ 2019-02-01 13:05 UTC (permalink / raw)
  To: Baolin Wang
  Cc: Mark Rutland, DTML, arm-soc, Arnd Bergmann, Lyra Zhang,
	Linux Kernel Mailing List, Rob Herring, Olof Johansson,
	Orson Zhai, Linux ARM

[-- Attachment #1.1: Type: text/plain, Size: 639 bytes --]

On Fri, Feb 01, 2019 at 08:05:30PM +0800, Baolin Wang wrote:

> On Spreadtrum platform, we use one mfd driver [1] to populate the
> SC27XX series PMICs including SC2731, SC2721, SC2720 and SC2730. So we
> use sc27xx to be compatible with different PMICs' devices, otherwise
> it will be difficult to define the mfd cell arrays in mfd driver. Do
> you have any good suggestion? Thanks.

You can just list all the individual device names in the of_match_table
for the MFD and then it can bind to any of them.  You can always map
them onto the same behaviour in the MFD driver if they are identical
from a software point of view.

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 0/4] Add new device nodes for Spreadtrum SC9860 platform
  2019-02-01 13:05     ` Mark Brown
@ 2019-02-12  8:40       ` Baolin Wang
  2019-02-12 12:20         ` Mark Brown
  0 siblings, 1 reply; 12+ messages in thread
From: Baolin Wang @ 2019-02-12  8:40 UTC (permalink / raw)
  To: Mark Brown
  Cc: Mark Rutland, DTML, arm-soc, Arnd Bergmann, Lyra Zhang,
	Linux Kernel Mailing List, Rob Herring, Olof Johansson,
	Orson Zhai, Linux ARM

Hi Mark,

Sorry for late reply.

On Fri, 1 Feb 2019 at 21:05, Mark Brown <broonie@kernel.org> wrote:
>
> On Fri, Feb 01, 2019 at 08:05:30PM +0800, Baolin Wang wrote:
>
> > On Spreadtrum platform, we use one mfd driver [1] to populate the
> > SC27XX series PMICs including SC2731, SC2721, SC2720 and SC2730. So we
> > use sc27xx to be compatible with different PMICs' devices, otherwise
> > it will be difficult to define the mfd cell arrays in mfd driver. Do
> > you have any good suggestion? Thanks.
>
> You can just list all the individual device names in the of_match_table
> for the MFD and then it can bind to any of them.  You can always map
> them onto the same behaviour in the MFD driver if they are identical
> from a software point of view.

If I understood correctly, as you suggested, we should add new
mfd_cell groups to list all different PMICs' device names. Something
like:

static const struct mfd_cell sprd_pmic_sc2731_devs[] = {
{
.name = "sc27xx-wdt",
.of_compatible = "sprd,sc2731-wdt",
}, {
.name = "sc27xx-rtc",
.of_compatible = "sprd,sc2731-rtc",
}, {
.name = "sc27xx-charger",
.of_compatible = "sprd,sc2731-charger",
},  {
.name = "sc27xx-fast-chg",
.of_compatible = "sprd,sc2731-fast-chg",
}, {
.name = "sc27xx-typec",
.of_compatible = "sprd,sc2731-typec",
}, {
.name = "sc27xx-eic",
.of_compatible = "sprd,sc2731-eic",
},

.......

};

static const struct mfd_cell sprd_pmic_sc2730_devs[] = {
{
.name = "sc27xx-wdt",
.of_compatible = "sprd,sc2730-wdt",
}, {
.name = "sc27xx-rtc",
.of_compatible = "sprd,sc2730-rtc",
}, {
.name = "sc27xx-charger",
.of_compatible = "sprd,sc2730-charger",
},  {
.name = "sc27xx-fast-chg",
.of_compatible = "sprd,sc2730-fast-chg",
}, {
.name = "sc27xx-typec",
.of_compatible = "sprd,sc2730-typec",
}, {
.name = "sc27xx-eic",
.of_compatible = "sprd,sc2730-eic",
},

.......

};

......

But from my point, they are just some meaningless duplication, and
will waste lots of code there.

-- 
Baolin Wang
Best Regards

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 0/4] Add new device nodes for Spreadtrum SC9860 platform
  2019-02-12  8:40       ` Baolin Wang
@ 2019-02-12 12:20         ` Mark Brown
  2019-02-13  5:45           ` Baolin Wang
  0 siblings, 1 reply; 12+ messages in thread
From: Mark Brown @ 2019-02-12 12:20 UTC (permalink / raw)
  To: Baolin Wang
  Cc: Mark Rutland, DTML, arm-soc, Arnd Bergmann, Lyra Zhang,
	Linux Kernel Mailing List, Rob Herring, Olof Johansson,
	Orson Zhai, Linux ARM

[-- Attachment #1.1: Type: text/plain, Size: 1099 bytes --]

On Tue, Feb 12, 2019 at 04:40:10PM +0800, Baolin Wang wrote:
> On Fri, 1 Feb 2019 at 21:05, Mark Brown <broonie@kernel.org> wrote:

> > You can just list all the individual device names in the of_match_table
> > for the MFD and then it can bind to any of them.  You can always map
> > them onto the same behaviour in the MFD driver if they are identical
> > from a software point of view.

> If I understood correctly, as you suggested, we should add new
> mfd_cell groups to list all different PMICs' device names. Something
> like:

I do think this is a good idea (registering the components of the MFD
using mfd_cell), though it wasn't quite the point I was making.  Having
individual device names matters less for Linux-internal names like this.

> But from my point, they are just some meaningless duplication, and
> will waste lots of code there.

I was more thinking of the of_match table that has the IDs that appear
in DT - they're the one that's the ABI.  Look at something like wm8994
where the driver has several IDs listed in the main table then selects
function drivers based on that.

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 0/4] Add new device nodes for Spreadtrum SC9860 platform
  2019-02-12 12:20         ` Mark Brown
@ 2019-02-13  5:45           ` Baolin Wang
  0 siblings, 0 replies; 12+ messages in thread
From: Baolin Wang @ 2019-02-13  5:45 UTC (permalink / raw)
  To: Mark Brown
  Cc: Mark Rutland, DTML, arm-soc, Arnd Bergmann, Lyra Zhang,
	Linux Kernel Mailing List, Rob Herring, Olof Johansson,
	Orson Zhai, Linux ARM

On Tue, 12 Feb 2019 at 20:20, Mark Brown <broonie@kernel.org> wrote:
>
> On Tue, Feb 12, 2019 at 04:40:10PM +0800, Baolin Wang wrote:
> > On Fri, 1 Feb 2019 at 21:05, Mark Brown <broonie@kernel.org> wrote:
>
> > > You can just list all the individual device names in the of_match_table
> > > for the MFD and then it can bind to any of them.  You can always map
> > > them onto the same behaviour in the MFD driver if they are identical
> > > from a software point of view.
>
> > If I understood correctly, as you suggested, we should add new
> > mfd_cell groups to list all different PMICs' device names. Something
> > like:
>
> I do think this is a good idea (registering the components of the MFD
> using mfd_cell), though it wasn't quite the point I was making.  Having
> individual device names matters less for Linux-internal names like this.
>
> > But from my point, they are just some meaningless duplication, and
> > will waste lots of code there.
>
> I was more thinking of the of_match table that has the IDs that appear
> in DT - they're the one that's the ABI.  Look at something like wm8994
> where the driver has several IDs listed in the main table then selects
> function drivers based on that.

Yes, we can use id_table to populate the PMIC child devices, but some
child devices need use the device node to get some resources which are
described in DT, so we must specify the of_compabible member of
mfd_cell. That means we should use compatible string of the
of_match_table to populate the child devices.

So the problem is still there, we should expand the mfd_cell groups to
list all device names, but just some meaningless duplication.




--
Baolin Wang
Best Regards

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, back to index

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-21  7:38 [PATCH 0/4] Add new device nodes for Spreadtrum SC9860 platform Baolin Wang
2019-01-21  7:38 ` [PATCH 1/4] arm64: dts: sprd: Remove PMIC INTC irq trigger type Baolin Wang
2019-01-21  7:38 ` [PATCH 2/4] arm64: dts: sprd: Add ADC calibration support Baolin Wang
2019-01-21  7:38 ` [PATCH 3/4] arm64: dts: sprd: Add SC2731 charger device Baolin Wang
2019-01-30 16:45   ` Arnd Bergmann
2019-01-21  7:38 ` [PATCH 4/4] arm64: dts: sprd: Add SC27XX fuel gauge device Baolin Wang
2019-01-30 16:46 ` [PATCH 0/4] Add new device nodes for Spreadtrum SC9860 platform Arnd Bergmann
2019-02-01 12:05   ` Baolin Wang
2019-02-01 13:05     ` Mark Brown
2019-02-12  8:40       ` Baolin Wang
2019-02-12 12:20         ` Mark Brown
2019-02-13  5:45           ` Baolin Wang

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org infradead-linux-arm-kernel@archiver.kernel.org
	public-inbox-index linux-arm-kernel


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox