Re: [PatchV2 1/2] ARM64: dts: meson-gxbb-odroidc2: Fix usb phy regulator power failed warning

[Anand Moon <linux.amoon@gmail.com>]

Hi Kevin / Martin,

On Fri, 18 Jan 2019 at 02:44, Kevin Hilman <khilman@baylibre.com> wrote:
>
> Hi Anand,
>
> Anand Moon <linux.amoon@gmail.com> writes:
>
> > Override the dr_mode from "host" to "peripheral" for dwc2
> > usb_phy0->usb0 initilization of OTG Micro-B type.
> > Changes fix the below warning for phy poweron failed --> -22
> >
> > Changes fix the initialization of c9000000.usb phy
> >
> > [    1.203900] phy phy-c0000000.phy.0: USB ID detect failed!
> > [    1.208048] phy phy-c0000000.phy.0: phy poweron failed --> -22
> > [    1.213877] WARNING: CPU: 1 PID: 44 at drivers/regulator/core.c:2054 _regulator_put.part.11+0xf0/0xf8
> > [    1.222953] Modules linked in:
> > [    1.225976] CPU: 1 PID: 44 Comm: kworker/1:1 Not tainted 5.0.0-rc1-xc2ml #3
> > [    1.232872] Hardware name: Hardkernel ODROID-C2 (DT)
> > [    1.237794] Workqueue: events deferred_probe_work_func
> > [    1.242878] pstate: 80000005 (Nzcv daif -PAN -UAO)
> > [    1.247623] pc : _regulator_put.part.11+0xf0/0xf8
> > [    1.252280] lr : regulator_put+0x34/0x48
> > [    1.256159] sp : ffff00001176bb00
> > [    1.259437] x29: ffff00001176bb00 x28: 0000000000000000
> > [    1.264698] x27: ffff80007f31beb8 x26: ffff000010eeb7e0
> > [    1.269959] x25: 0000000000000000 x24: 0000000000000009
> > [    1.275220] x23: ffff00001176bbc8 x22: ffff80007ed9d500
> > [    1.280482] x21: ffff0000111bd6c8 x20: ffff80007ed9d700
> > [    1.285743] x19: ffff80007ed9d700 x18: 000000000000006f
> > [    1.291004] x17: 0000000000000000 x16: 0000000000000000
> > [    1.296265] x15: 0000000000000400 x14: 0000000000000400
> > [    1.301527] x13: ff00000000000000 x12: ffffffffffffffff
> > [    1.306788] x11: 0000000000000038 x10: 0000000000000040
> > [    1.312049] x9 : ffff0000111d58b0 x8 : ffff0000111d58a8
> > [    1.317310] x7 : ffff80007ed9db00 x6 : ffff80007ec21b00
> > [    1.322571] x5 : ffff80007f400248 x4 : ffff80007fba9b00
> > [    1.327833] x3 : ffff0000112d9eb8 x2 : ffff80007ec21b00
> > [    1.333094] x1 : 0000000000000000 x0 : 0000000000000001
> > [    1.338356] Call trace:
> > [    1.340773]  _regulator_put.part.11+0xf0/0xf8
> > [    1.345085]  regulator_put+0x34/0x48
> > [    1.348621]  regulator_bulk_free+0x30/0x50
> > [    1.352675]  devm_regulator_bulk_release+0x18/0x20
> > [    1.357421]  release_nodes+0x1b0/0x220
> > [    1.361127]  devres_release_all+0x34/0x50
> > [    1.365094]  really_probe+0xec/0x290
> > [    1.368630]  driver_probe_device+0x54/0xe8
> > [    1.372684]  __device_attach_driver+0xb8/0xe8
> > [    1.376997]  bus_for_each_drv+0x78/0xc8
> > [    1.380792]  __device_attach+0xd4/0x130
> > [    1.384587]  device_initial_probe+0x10/0x18
> > [    1.388727]  bus_probe_device+0x90/0x98
> > [    1.392522]  deferred_probe_work_func+0x6c/0xa0
> > [    1.397010]  process_one_work+0x1e0/0x318
> > [    1.400975]  worker_thread+0x228/0x428
> > [    1.404684]  kthread+0x124/0x128
> > [    1.407876]  ret_from_fork+0x10/0x18
> > [    1.411410] ---[ end trace de5fd1b262c1f56a ]---
> > [    1.416055] WARNING: CPU: 1 PID: 44 at drivers/regulator/core.c:2054 _regulator_put.part.11+0xf0/0xf8
> > [    1.425123] Modules linked in:
> > [    1.428144] CPU: 1 PID: 44 Comm: kworker/1:1 Tainted: GW 5.0.0-rc1-xc2ml #3
> > [    1.436422] Hardware name: Hardkernel ODROID-C2 (DT)
> > [    1.441340] Workqueue: events deferred_probe_work_func
> >
> > Fixes: 5a0803bd5ae (ARM64: dts: meson-gxbb-odroidc2: Enable USB Nodes)
>
> Minor nit: the shortlog should be in double quotes.
>
> I fixed it up manually, so nothing you need to do, but just for future
> reference.
>
> This was found by some automated checking recently added to the
> linux-next tree.
>
> Kevin
>

Thanks: I will follow the protocol next time.

As pointed my Martin on Odroid C1+ my patch do not fix complete issue.

[0] https://patchwork.kernel.org/patch/10761371/
[1] https://patchwork.kernel.org/patch/10761375/

Both of my patch seem to be wrong and if possible please so drop them
from linux-next and your fix tagged.
I will try to find proper fix proper to the issue.

Quick phy driver and dts changes enable  *Bus 01.Port 1* and *Bus 02.Port 1*

[alarm@archl-c2m ~]$ lsusb -t
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
        |__ Port 1: Dev 5, If 0, Class=Mass Storage, Driver=usb-storage, 480M
        |__ Port 2: Dev 3, If 0, Class=Video, Driver=uvcvideo, 480M
        |__ Port 2: Dev 3, If 1, Class=Video, Driver=uvcvideo, 480M
        |__ Port 2: Dev 3, If 2, Class=Audio, Driver=, 480M
        |__ Port 2: Dev 3, If 3, Class=Audio, Driver=, 480M
        |__ Port 3: Dev 4, If 0, Class=Vendor Specific Class, Driver=, 480M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M

Need to fix the vbus setting for both the bus ports, which I am looking into.

Best Regards


-Anand

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel