From mboxrd@z Thu Jan 1 00:00:00 1970 From: tyler.baker@linaro.org (Tyler Baker) Date: Mon, 9 Mar 2015 09:14:22 -0700 Subject: [PATCH 1/2] ARM: dts: add cubietech cubieboard4 In-Reply-To: <20150308172858.GI5085@lukather> References: <1425684905-23652-1-git-send-email-tyler.baker@linaro.org> <1425684905-23652-2-git-send-email-tyler.baker@linaro.org> <20150308172858.GI5085@lukather> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Maxime, On 8 March 2015 at 10:28, Maxime Ripard wrote: > Hi Tyler, > > On Fri, Mar 06, 2015 at 03:35:04PM -0800, tyler.baker at linaro.org wrote: >> From: Tyler Baker >> >> Add a Cubietech Cubieboard4 device tree and instruct make to build it. This >> device tree has been derived from the sun9i-a80-optimus.dts as they are very >> similar in design[1]. Notably, I2C3 is not used on Cubieboard4 and the LED/PWM >> definitions will need to be updated in the future. >> >> [1] http://dl.cubieboard.org/model/cc-a80/Hardware/CC-A80-HW-V1.1.pdf >> >> Signed-off-by: Tyler Baker >> --- >> arch/arm/boot/dts/Makefile | 3 +- >> arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 100 ++++++++++++++++++++++++++++ >> 2 files changed, 102 insertions(+), 1 deletion(-) >> create mode 100644 arch/arm/boot/dts/sun9i-a80-cubieboard4.dts >> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index 4837044..0f67dab 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -553,7 +553,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \ >> sun8i-a23-ippo-q8h-v5.dtb \ >> sun8i-a23-ippo-q8h-v1.2.dtb >> dtb-$(CONFIG_MACH_SUN9I) += \ >> - sun9i-a80-optimus.dtb >> + sun9i-a80-optimus.dtb \ >> + sun9i-a80-cubieboard4.dtb >> dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ >> tegra20-harmony.dtb \ >> tegra20-iris-512.dtb \ >> diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts >> new file mode 100644 >> index 0000000..b239b39 >> --- /dev/null >> +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts >> @@ -0,0 +1,100 @@ >> +/* >> + * Copyright 2015 Tyler Baker >> + * >> + * Tyler Baker >> + * Chen-Yu Tsai >> + * >> + * This file is dual-licensed: you can use it either under the terms >> + * of the GPL or the X11 license, at your option. Note that this dual >> + * licensing only applies to this file, and not this project as a >> + * whole. >> + * >> + * a) This file is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License as >> + * published by the Free Software Foundation; either version 2 of the >> + * License, or (at your option) any later version. >> + * >> + * This file is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * Or, alternatively, >> + * >> + * b) Permission is hereby granted, free of charge, to any person >> + * obtaining a copy of this software and associated documentation >> + * files (the "Software"), to deal in the Software without >> + * restriction, including without limitation the rights to use, >> + * copy, modify, merge, publish, distribute, sublicense, and/or >> + * sell copies of the Software, and to permit persons to whom the >> + * Software is furnished to do so, subject to the following >> + * conditions: >> + * >> + * The above copyright notice and this permission notice shall be >> + * included in all copies or substantial portions of the Software. >> + * >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, >> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES >> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND >> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT >> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, >> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING >> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR >> + * OTHER DEALINGS IN THE SOFTWARE. >> + */ >> + >> +/dts-v1/; >> +#include "sun9i-a80.dtsi" >> +#include "sunxi-common-regulators.dtsi" >> + >> +#include >> +#include >> + >> +/ { >> + model = "Cubietech Cubieboard4"; >> + compatible = "cubietech,a80-cubietruck", "allwinner,sun9i-a80"; I noticed this should not be a80-cubietruck but instead a80-cubieboard4. Will fix in v1. >> + >> + aliases { >> + serial0 = &uart0; >> + }; >> + >> + chosen { >> + bootargs = "earlyprintk console=ttyS0,115200"; > > It would be great not to use earlyprintk, just in case we have a > kernel compiled with earlyprintk support, but for another SoC. > > And while we're at it, using stdout-path would allow use to get rid of > the bootargs entirely. Great suggestion. I've removed the bootargs, added stdout-path, and have done some testing locally. Working just fine, will be included in v1. > >> + }; >> + >> +}; >> + >> +&pio { >> + > > This new line is not needed. Ack. > >> + mmc0_cd_pin_cubieboard4: mmc0_cd_pin at 0 { >> + allwinner,pins = "PH18"; >> + allwinner,function = "gpio_in"; >> + allwinner,drive = ; >> + allwinner,pull = ; >> + }; >> +}; >> + >> +&mmc0 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>; >> + vmmc-supply = <®_vcc3v0>; >> + bus-width = <4>; >> + cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */ >> + cd-inverted; >> + status = "okay"; >> +}; >> + >> +&mmc2 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&mmc2_8bit_pins>; >> + vmmc-supply = <®_vcc3v0>; >> + bus-width = <8>; >> + non-removable; >> + status = "okay"; >> +}; >> + >> +&uart0 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&uart0_pins_a>; >> + status = "okay"; >> +}; > > Looks good otherwise, thanks! Thanks for the review! > > Maxime > > -- > Maxime Ripard, Free Electrons > Embedded Linux, Kernel and Android engineering > http://free-electrons.com Tyler