* [GIT PULL] mmc voltage and boot issue fixes for omaps for v5.2
@ 2019-05-29 7:32 Tony Lindgren
2019-06-16 20:28 ` Olof Johansson
0 siblings, 1 reply; 2+ messages in thread
From: Tony Lindgren @ 2019-05-29 7:32 UTC (permalink / raw)
To: arm; +Cc: Tony Lindgren, linux-omap, linux-arm-kernel
From: "Tony Lindgren" <tony@atomide.com>
The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9:
Linux 5.2-rc1 (2019-05-19 15:47:09 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v5.2/fixes-rc2
for you to fetch changes up to 4ee23cd76c0ce8622976b3da0e2bc89e6d94f6d4:
Merge branch 'omap-for-v5.2/ti-sysc' into fixes (2019-05-20 08:33:03 -0700)
----------------------------------------------------------------
Fixes for omap variants for dra7 mmc voltage and boot issues
This series contains dra7 mmc voltage fixes, and fixes to the recent
changes to probe devices with device tree data insteas of legacy
platform data:
- Two fixes for dra7 mmc that needs 1.8V mode disabled as in case of a
reset, the bootrom will try to access the mmc card at 3.3V potentially
damaging the card
- Two regression fixes for am335x d_can. We must allow devices with no
control registers for ti-sysc interconnect target module driver for
at least d_can, and we remove the incorrect control registers for
d_can. And we must configure the osc clock for d_can as otherwise
register access may fail depending on the bootloader version
- Four regression fixes for dra7 variant dts files to tag rtc and usb4
as disabled for dra71x and dra76x. These SoC variants do not have
these devices, and got accidentally enabled when the L4 interconnect
got defined in the dra7-l4.dtsi for the dra7 SoC family
----------------------------------------------------------------
Faiz Abbas (2):
ARM: dts: am57xx-idk: Remove support for voltage switching for SD card
ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values
Keerthy (4):
ARM: dts: dra76x: Disable rtc target module
ARM: dts: dra76x: Disable usb4_tm target module
ARM: dts: dra71x: Disable rtc target module
ARM: dts: dra71x: Disable usb4_tm target module
Tony Lindgren (5):
ARM: dts: Configure osc clock for d_can on am335x
bus: ti-sysc: Handle devices with no control registers
Merge branch 'am5-sdio-fixes' into fixes
Merge branch 'fixes-dra7' into fixes
Merge branch 'omap-for-v5.2/ti-sysc' into fixes
arch/arm/boot/dts/am33xx-l4.dtsi | 14 +++++------
arch/arm/boot/dts/am437x-l4.dtsi | 4 ----
arch/arm/boot/dts/am57xx-idk-common.dtsi | 1 +
arch/arm/boot/dts/dra7-l4.dtsi | 2 +-
arch/arm/boot/dts/dra71-evm.dts | 2 +-
arch/arm/boot/dts/dra71x.dtsi | 17 +++++++++++++
arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi | 40 +++++++++++++++----------------
arch/arm/boot/dts/dra76x.dtsi | 8 +++++++
drivers/bus/ti-sysc.c | 23 +++++++++---------
9 files changed, 65 insertions(+), 46 deletions(-)
create mode 100644 arch/arm/boot/dts/dra71x.dtsi
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [GIT PULL] mmc voltage and boot issue fixes for omaps for v5.2
2019-05-29 7:32 [GIT PULL] mmc voltage and boot issue fixes for omaps for v5.2 Tony Lindgren
@ 2019-06-16 20:28 ` Olof Johansson
0 siblings, 0 replies; 2+ messages in thread
From: Olof Johansson @ 2019-06-16 20:28 UTC (permalink / raw)
To: Tony Lindgren; +Cc: linux-omap, ARM-SoC Maintainers, Linux ARM Mailing List
On Wed, May 29, 2019 at 12:32 AM Tony Lindgren <tony@atomide.com> wrote:
>
> From: "Tony Lindgren" <tony@atomide.com>
>
> The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9:
>
> Linux 5.2-rc1 (2019-05-19 15:47:09 -0700)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v5.2/fixes-rc2
>
> for you to fetch changes up to 4ee23cd76c0ce8622976b3da0e2bc89e6d94f6d4:
>
> Merge branch 'omap-for-v5.2/ti-sysc' into fixes (2019-05-20 08:33:03 -0700)
>
> ----------------------------------------------------------------
> Fixes for omap variants for dra7 mmc voltage and boot issues
>
> This series contains dra7 mmc voltage fixes, and fixes to the recent
> changes to probe devices with device tree data insteas of legacy
> platform data:
>
> - Two fixes for dra7 mmc that needs 1.8V mode disabled as in case of a
> reset, the bootrom will try to access the mmc card at 3.3V potentially
> damaging the card
>
> - Two regression fixes for am335x d_can. We must allow devices with no
> control registers for ti-sysc interconnect target module driver for
> at least d_can, and we remove the incorrect control registers for
> d_can. And we must configure the osc clock for d_can as otherwise
> register access may fail depending on the bootloader version
>
> - Four regression fixes for dra7 variant dts files to tag rtc and usb4
> as disabled for dra71x and dra76x. These SoC variants do not have
> these devices, and got accidentally enabled when the L4 interconnect
> got defined in the dra7-l4.dtsi for the dra7 SoC family
Merged, thanks!
-Olof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-06-16 20:28 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-29 7:32 [GIT PULL] mmc voltage and boot issue fixes for omaps for v5.2 Tony Lindgren
2019-06-16 20:28 ` Olof Johansson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).