From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.8 required=3.0 tests=DKIMWL_WL_HIGH,DKIM_SIGNED, DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id CA6CBC74A51 for ; Thu, 11 Jul 2019 09:10:06 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 7DFC321537 for ; Thu, 11 Jul 2019 09:10:06 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="UX+sHELs"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=xilinx.onmicrosoft.com header.i=@xilinx.onmicrosoft.com header.b="V4M46TWM" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 7DFC321537 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=xilinx.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:In-Reply-To:References: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=SFl8CQZzdjl0MQ+ieVxpJZYFBFjgeoL1DQWQqTifgTE=; b=UX+sHELs/wGPKP bbeEwraN2kqz2J0SmOp+2phCorb8w7uxO9JUtMcZ+S4XGc8bqkXN3/DVtpP9qvNjTe/RCZSShvc/N AKAC2rifI/wDvqkkaEI/UwwE1KD3LrnPbDyspwiEFmRcNz+yonwnf1EwBSExpPDzaUNURFgudIY/Z dUkHl9sBmHEoozs+HVZgstJMzVzrvz846TB8bcciYJqTvZA3RS/rObSV1Y3H13XUjUD0/0441Pop1 5qScHHb8af+93osjOi1azbY7ttZtduipF7ThqP8Igk7qeL7Wa5iP3hjZ/6KvMbHXXltj0MPOI/Gxo x6wMpudoCBjDFDpWOyUA==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92 #3 (Red Hat Linux)) id 1hlV5Y-0006YT-U1; Thu, 11 Jul 2019 09:10:05 +0000 Received: from mail-eopbgr720068.outbound.protection.outlook.com ([40.107.72.68] helo=NAM05-CO1-obe.outbound.protection.outlook.com) by bombadil.infradead.org with esmtps (Exim 4.92 #3 (Red Hat Linux)) id 1hlV5F-0006Ni-LS for linux-arm-kernel@lists.infradead.org; Thu, 11 Jul 2019 09:09:49 +0000 ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=ZOS4wAEf6doZzjL3B+gPyyTDT9WCt814P5a5dRR+2Wqh72TQ/SvGS+pB2YM6WCa75MBVX8os/r0FpWrB2dyJX6M86KAt+FKs5UC2Lx8emvcFwmCH53sSmMB3DLWxu8GD398bZVIvsekYZQT6S/p36WlP6ZjgTaIt/qL8lmLQHMPjU43ybDtDP26IJc4v/ZlCJDIPoTmtJEXVpYQfURyyobylGjZFNFe1WSe0pRKRIGCAWpTVFhTCVHbe6S1ehY0odDYl8tZEvYYV+UmnRbHstcYaMOSU9G9PsqVJomV8Y/I4ctp4oXEpeWI0O6easGBiYGORS29VURFEQiE4MH6M6g== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=bAxqZbl8XOiLKyBKtMpw7pXToRlDXvZtUUHQn5Xu+tE=; b=HJA2gcIF3O++0KZJKm4RcnAgyIf5cQrLNxQDGLdVAd7Y3L2rdCaUUh0odcY9iZ44t6NIeF2Ih7FXNlPtPQM6YTNkqNHHtaK2GH4VLHJzaWSt8LBiHzOgtV1khN6YIVUkg8KGJDz1jCu8FEw8YX1l2aYgCo6FrjGFh0J2E2WU5ftPMVgyfsqcqyGsxotX7IVgp8DfBhrFXm6c6p9Me5gZ/yy3zoyExhvCmwWWN3xCScSSTSWmXPNE1IR2lTmb2mr6gX9ZsJ7kCt5uepCHF5wK+yxW75FHLWSrLnwZJqRF7xl+TVEZkboMFHj1/G6AP1v3mDsvczwONtKVTarmzDGBQQ== ARC-Authentication-Results: i=1; mx.microsoft.com 1;spf=pass smtp.mailfrom=xilinx.com;dmarc=pass action=none header.from=xilinx.com;dkim=pass header.d=xilinx.com;arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=xilinx.onmicrosoft.com; s=selector1-xilinx-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=bAxqZbl8XOiLKyBKtMpw7pXToRlDXvZtUUHQn5Xu+tE=; b=V4M46TWMGtCvhC7kqTUV5jy64w/YUehd7Jhgz0Lbn8YrdcWw7Z+YP+QquYZfK4O1P3gdVH1sipPg5Y6HJI/XRJiggKLqOtis4hyPiAu1vpJis5MxM8rRHLoAVFVFEi9d0+mQgyN+HnfHxHI65zELupiPFxSfK6uA8tFKzKZrHqY= Received: from CH2PR02MB6088.namprd02.prod.outlook.com (52.132.228.94) by CH2PR02MB6039.namprd02.prod.outlook.com (10.255.156.16) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.2073.10; Thu, 11 Jul 2019 09:09:37 +0000 Received: from CH2PR02MB6088.namprd02.prod.outlook.com ([fe80::456d:ace7:7c55:8639]) by CH2PR02MB6088.namprd02.prod.outlook.com ([fe80::456d:ace7:7c55:8639%3]) with mapi id 15.20.2052.020; Thu, 11 Jul 2019 09:09:37 +0000 From: Vishal Sagar To: Sakari Ailus , Vishal Sagar Subject: RE: [PATCH v9 2/2] media: v4l: xilinx: Add Xilinx MIPI CSI-2 Rx Subsystem driver Thread-Topic: [PATCH v9 2/2] media: v4l: xilinx: Add Xilinx MIPI CSI-2 Rx Subsystem driver Thread-Index: AQHVID4PYfrRtfYgTECjjXwqUQCuJaahkfqAgCO733A= Date: Thu, 11 Jul 2019 09:09:37 +0000 Message-ID: References: <1560247809-117978-1-git-send-email-vishal.sagar@xilinx.com> <1560247809-117978-3-git-send-email-vishal.sagar@xilinx.com> <20190618151933.zqepfqdjjjlhea7h@valkosipuli.retiisi.org.uk> In-Reply-To: <20190618151933.zqepfqdjjjlhea7h@valkosipuli.retiisi.org.uk> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-Auto-Response-Suppress: DR, RN, NRN, OOF, AutoReply X-MS-TNEF-Correlator: authentication-results: spf=none (sender IP is ) smtp.mailfrom=vsagar@xilinx.com; x-originating-ip: [149.199.50.133] x-ms-publictraffictype: Email x-ms-office365-filtering-correlation-id: b17bcb98-89e2-4af4-6bc5-08d705df7ff8 x-ms-office365-filtering-ht: Tenant x-microsoft-antispam: BCL:0; PCL:0; RULEID:(2390118)(7020095)(4652040)(8989299)(4534185)(4627221)(201703031133081)(201702281549075)(8990200)(5600148)(711020)(4605104)(1401327)(4618075)(2017052603328)(7193020); SRVR:CH2PR02MB6039; x-ms-traffictypediagnostic: CH2PR02MB6039: x-microsoft-antispam-prvs: x-ms-oob-tlc-oobclassifiers: OLM:324; x-forefront-prvs: 0095BCF226 x-forefront-antispam-report: SFV:NSPM; SFS:(10009020)(4636009)(376002)(346002)(366004)(136003)(396003)(39860400002)(43544003)(199004)(189003)(45074003)(13464003)(66476007)(71190400001)(66066001)(55016002)(76116006)(66556008)(66946007)(6436002)(33656002)(66446008)(14454004)(229853002)(54906003)(7696005)(2906002)(71200400001)(25786009)(53936002)(64756008)(99286004)(6116002)(3846002)(110136005)(7736002)(74316002)(6246003)(305945005)(81156014)(7416002)(4326008)(81166006)(9686003)(52536014)(5660300002)(14444005)(256004)(76176011)(53946003)(186003)(6506007)(30864003)(53546011)(478600001)(26005)(446003)(476003)(486006)(11346002)(316002)(6636002)(86362001)(8936002)(102836004)(68736007)(8676002)(579004)(569006); DIR:OUT; SFP:1101; SCL:1; SRVR:CH2PR02MB6039; H:CH2PR02MB6088.namprd02.prod.outlook.com; FPR:; SPF:None; LANG:en; PTR:InfoNoRecords; A:1; MX:1; received-spf: None (protection.outlook.com: xilinx.com does not designate permitted sender hosts) x-ms-exchange-senderadcheck: 1 x-microsoft-antispam-message-info: Cn/F1E8UmMktAg0x3y/v+E1O6VrF8siLqciINGjDWOBFuXQbbzOW4IorCOEb1R03lXffi7p6wxX6rIwf4uCmQvTFEZRseFdDhsvprwMxvxXUlJ7lEQZzlEeHEHiTriscWMqZJjSCnz2/ndxqeGZbflvcr3VIAQ2mJ7LGZWL77FL4L5HvWOmJaH3vofhD5EefFM/TvlFFnvu5AVbj4XtawD/opoctOgzylqDmwNdnPvXWSFy1JWyNdEp+GgkG0wYpC3uSjPH9gZBZhH4i9WRq0BJEUwm7YRneGeSy02mh7CNtEB+TvFTPcS7PHdMcFtWxRO00QpVflMUlyLSOYO/zcPx+jNSkkzRYQ+wCAjSv7mBkJRw/HIEpW3oOWGPTt0SMoJudCRpoQpMqSQJtUb0+cRZXzIx8FRgHBsvECYWa0+A= MIME-Version: 1.0 X-OriginatorOrg: xilinx.com X-MS-Exchange-CrossTenant-Network-Message-Id: b17bcb98-89e2-4af4-6bc5-08d705df7ff8 X-MS-Exchange-CrossTenant-originalarrivaltime: 11 Jul 2019 09:09:37.7028 (UTC) X-MS-Exchange-CrossTenant-fromentityheader: Hosted X-MS-Exchange-CrossTenant-id: 657af505-d5df-48d0-8300-c31994686c5c X-MS-Exchange-CrossTenant-mailboxtype: HOSTED X-MS-Exchange-CrossTenant-userprincipalname: vsagar@xilinx.com X-MS-Exchange-Transport-CrossTenantHeadersStamped: CH2PR02MB6039 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20190711_020945_800070_F0CA0A77 X-CRM114-Status: GOOD ( 32.52 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: "mark.rutland@arm.com" , "devicetree@vger.kernel.org" , Jacopo Mondi , Dinesh Kumar , Hyun Kwon , Sandip Kothari , "linux-kernel@vger.kernel.org" , "robh+dt@kernel.org" , Michal Simek , "laurent.pinchart@ideasonboard.com" , Luca Ceresoli , "hans.verkuil@cisco.com" , "mchehab@kernel.org" , "linux-arm-kernel@lists.infradead.org" , "linux-media@vger.kernel.org" Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org Hi Sakari, Thanks for reviewing. > -----Original Message----- > From: Sakari Ailus [mailto:sakari.ailus@iki.fi] > Sent: Tuesday, June 18, 2019 8:50 PM > To: Vishal Sagar > Cc: Hyun Kwon ; laurent.pinchart@ideasonboard.com; > mchehab@kernel.org; robh+dt@kernel.org; mark.rutland@arm.com; Michal > Simek ; linux-media@vger.kernel.org; > devicetree@vger.kernel.org; hans.verkuil@cisco.com; linux-arm- > kernel@lists.infradead.org; linux-kernel@vger.kernel.org; Dinesh Kumar > ; Sandip Kothari ; Luca Ceresoli > ; Jacopo Mondi > Subject: Re: [PATCH v9 2/2] media: v4l: xilinx: Add Xilinx MIPI CSI-2 Rx > Subsystem driver > > EXTERNAL EMAIL > > Hi Vishal, > > On Tue, Jun 11, 2019 at 03:40:09PM +0530, Vishal Sagar wrote: > > The Xilinx MIPI CSI-2 Rx Subsystem soft IP is used to capture images > > from MIPI CSI-2 camera sensors and output AXI4-Stream video data ready > > for image processing. Please refer to PG232 for details. > > > > The driver is used to set the number of active lanes, if enabled > > in hardware. The CSI2 Rx controller filters out all packets except for > > the packets with data type fixed in hardware. RAW8 packets are always > > allowed to pass through. > > > > It is also used to setup and handle interrupts and enable the core. It > > logs all the events in respective counters between streaming on and off. > > > > The driver supports only the video format bridge enabled configuration. > > Some data types like YUV 422 10bpc, RAW16, RAW20 are supported when > the > > CSI v2.0 feature is enabled in design. When the VCX feature is enabled, > > the maximum number of virtual channels becomes 16 from 4. > > > > Signed-off-by: Vishal Sagar > > Reviewed-by: Hyun Kwon > > --- > > v9 > > - Moved all controls and events to xilinx-csi2rxss.h > > - Updated name and description of controls and events > > - Get control base address from v4l2-controls.h (0x10c0) > > - Fix KConfig for dependency on VIDEO_XILINX > > - Added enum_mbus_code() support > > - Added default format to be returned on open() > > - Mark variables are const > > - Remove references to short packet in comments > > - Add check for streaming before setting active lanes control > > - strlcpy -> strscpy > > - Fix xcsi2rxss_set_format() > > > > v8 > > - Use clk_bulk* APIs > > - Add gpio reset for asserting video_aresetn when stream line buffer occurs > > - Removed short packet related events and irq handling > > - V4L2_EVENT_XLNXCSIRX_SPKT and V4L2_EVENT_XLNXCSIRX_SPKT_OVF > removed > > - Removed frame counter control > V4L2_CID_XILINX_MIPICSISS_FRAME_COUNTER > > and xcsi2rxss_g_volatile_ctrl() > > - Minor formatting fixes > > > > v7 > > - No change > > > > v6 > > - No change > > > > v5 > > - Removed bayer and updated related parts like set default format based > > on Luca Cersoli's comments. > > - Added correct YUV422 10bpc media bus format > > > > v4 > > - Removed irq member from core structure > > - Consolidated IP config prints in xcsi2rxss_log_ipconfig() > > - Return -EINVAL in case of invalid ioctl > > - Code formatting > > - Added reviewed by Hyun Kwon > > > > v3 > > - Fixed comments given by Hyun. > > - Removed DPHY 200 MHz clock. This will be controlled by DPHY driver > > - Minor code formatting > > - en_csi_v20 and vfb members removed from struct and made local to dt > parsing > > - lock description updated > > - changed to ratelimited type for all dev prints in irq handler > > - Removed YUV 422 10bpc media format > > > > v2 > > - Fixed comments given by Hyun and Sakari. > > - Made all bitmask using BIT() and GENMASK() > > - Removed unused definitions > > - Removed DPHY access. This will be done by separate DPHY PHY driver. > > - Added support for CSI v2.0 for YUV 422 10bpc, RAW16, RAW20 and extra > > virtual channels > > - Fixed the ports as sink and source > > - Now use the v4l2fwnode API to get number of data-lanes > > - Added clock framework support > > - Removed the close() function > > - updated the set format function > > - support only VFB enabled configuration > > > > drivers/media/platform/xilinx/Kconfig | 11 + > > drivers/media/platform/xilinx/Makefile | 1 + > > drivers/media/platform/xilinx/xilinx-csi2rxss.c | 1488 > +++++++++++++++++++++++ > > include/uapi/linux/v4l2-controls.h | 4 + > > include/uapi/linux/xilinx-csi2rxss.h | 52 + > > 5 files changed, 1556 insertions(+) > > create mode 100644 drivers/media/platform/xilinx/xilinx-csi2rxss.c > > create mode 100644 include/uapi/linux/xilinx-csi2rxss.h > > > > diff --git a/drivers/media/platform/xilinx/Kconfig > b/drivers/media/platform/xilinx/Kconfig > > index a2773ad..349da87 100644 > > --- a/drivers/media/platform/xilinx/Kconfig > > +++ b/drivers/media/platform/xilinx/Kconfig > > @@ -10,6 +10,17 @@ config VIDEO_XILINX > > > > if VIDEO_XILINX > > > > +config VIDEO_XILINX_CSI2RXSS > > + tristate "Xilinx CSI2 Rx Subsystem" > > + depends on VIDEO_XILINX > > + help > > + Driver for Xilinx MIPI CSI2 Rx Subsystem. This is a V4L sub-device > > + based driver that takes input from CSI2 Tx source and converts > > + it into an AXI4-Stream. The subsystem comprises of a CSI2 Rx > > + controller, DPHY, an optional I2C controller and a Video Format > > + Bridge. The driver is used to set the number of active lanes and > > + get short packet data. > > + > > config VIDEO_XILINX_TPG > > tristate "Xilinx Video Test Pattern Generator" > > depends on VIDEO_XILINX > > diff --git a/drivers/media/platform/xilinx/Makefile > b/drivers/media/platform/xilinx/Makefile > > index 4cdc0b1..6119a34 100644 > > --- a/drivers/media/platform/xilinx/Makefile > > +++ b/drivers/media/platform/xilinx/Makefile > > @@ -3,5 +3,6 @@ > > xilinx-video-objs += xilinx-dma.o xilinx-vip.o xilinx-vipp.o > > > > obj-$(CONFIG_VIDEO_XILINX) += xilinx-video.o > > +obj-$(CONFIG_VIDEO_XILINX_CSI2RXSS) += xilinx-csi2rxss.o > > obj-$(CONFIG_VIDEO_XILINX_TPG) += xilinx-tpg.o > > obj-$(CONFIG_VIDEO_XILINX_VTC) += xilinx-vtc.o > > diff --git a/drivers/media/platform/xilinx/xilinx-csi2rxss.c > b/drivers/media/platform/xilinx/xilinx-csi2rxss.c > > new file mode 100644 > > index 0000000..373d91f > > --- /dev/null > > +++ b/drivers/media/platform/xilinx/xilinx-csi2rxss.c > > @@ -0,0 +1,1488 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * Driver for Xilinx MIPI CSI2 Rx Subsystem > > + * > > + * Copyright (C) 2016 - 2019 Xilinx, Inc. > > + * > > + * Contacts: Vishal Sagar > > + * > > + */ > > +/** > > + * struct xcsi2rxss_event - Event log structure > > + * @mask: Event mask > > + * @name: Name of the event > > + * @counter: Count number of events > > + */ > > +struct xcsi2rxss_event { > > + u32 mask; > > + const char *name; > > + unsigned int counter; > > You can now omit the counter field that is not used anymore. The counter > should be a separate integer array. > Agreed. I will make the counters into separate integer array. > > +}; > > + > > +/* > > + * struct xcsi2rxss_core - Core configuration CSI2 Rx Subsystem device > structure > > + * @dev: Platform structure > > + * @iomem: Base address of subsystem > > + * @enable_active_lanes: If number of active lanes can be modified > > + * @max_num_lanes: Maximum number of lanes present > > + * @datatype: Data type filter > > + * @events: Structure to maintain event logs > > + * @vcx_events: Structure to maintain VCX event logs > > + * @en_vcx: If more than 4 VC are enabled > > + * @clks: array of clocks > > + * @num_clks: number of clocks > > + * @rst_gpio: reset to video_aresetn > > + */ > > + > > +/* Print event counters */ > > +static void xcsi2rxss_log_counters(struct xcsi2rxss_state *state) > > +{ > > + struct xcsi2rxss_core *core = &state->core; > > + int i; > > unsigned int > Noted. Will fix in next version. > > + > > + for (i = 0; i < XCSI_NUM_EVENTS; i++) { > > + if (core->events[i].counter > 0) { > > + dev_info(core->dev, "%s events: %d\n", > > + core->events[i].name, > > + core->events[i].counter); > > + } > > + } > > + > > + if (core->en_vcx) { > > + for (i = 0; i < XCSI_VCX_NUM_EVENTS; i++) { > > + if (core->vcx_events[i].counter > 0) { > > + dev_info(core->dev, > > + "VC %d Frame %s err vcx events: %d\n", > > + (i / 2) + XCSI_VCX_START, > > + i & 1 ? "Sync" : "Level", > > + core->vcx_events[i].counter); > > + } > > + } > > + } > > +} > > + > > +static void xcsi2rxss_log_ipconfig(struct xcsi2rxss_state *state) > > +{ > > + struct xcsi2rxss_core *core = &state->core; > > + > > + dev_dbg(core->dev, "****** Xilinx MIPI CSI2 Rx SS IP Config ******\n"); > > + dev_dbg(core->dev, "vcx is %s", core->en_vcx ? "enabled" : "disabled"); > > + dev_dbg(core->dev, "Enable active lanes property is %s\n", > > + core->enable_active_lanes ? "present" : "absent"); > > + dev_dbg(core->dev, "Max lanes = %d", core->max_num_lanes); > > + dev_dbg(core->dev, "Pixel format set as 0x%x\n", core->datatype); > > + dev_dbg(core->dev, > "**********************************************\n"); > > +} > > + > > +/** > > + * xcsi2rxss_log_status - Logs the status of the CSI-2 Receiver > > + * @sd: Pointer to V4L2 subdevice structure > > + * > > + * This function prints the current status of Xilinx MIPI CSI-2 > > + * > > + * Return: 0 on success > > + */ > > +static int xcsi2rxss_log_status(struct v4l2_subdev *sd) > > +{ > > + struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd); > > + struct xcsi2rxss_core *core = &xcsi2rxss->core; > > + unsigned int reg, data, i, max_vc; > > Please use u32 for 32-bit register values. > Noted. Will fix in next version. > > + > > + mutex_lock(&xcsi2rxss->lock); > > + > > + xcsi2rxss_log_ipconfig(xcsi2rxss); > > + > > + xcsi2rxss_log_counters(xcsi2rxss); > > + > > + dev_info(core->dev, "***** Core Status *****\n"); > > + data = xcsi2rxss_read(core, XCSI_CSR_OFFSET); > > + dev_info(core->dev, "Short Packet FIFO Full = %s\n", > > + XCSI_GET_BITSET_STR(data, XCSI_CSR_SPFIFOFULL)); > > + dev_info(core->dev, "Short Packet FIFO Not Empty = %s\n", > > + XCSI_GET_BITSET_STR(data, XCSI_CSR_SPFIFONE)); > > + dev_info(core->dev, "Stream line buffer full = %s\n", > > + XCSI_GET_BITSET_STR(data, XCSI_CSR_SLBF)); > > + dev_info(core->dev, "Soft reset/Core disable in progress = %s\n", > > + XCSI_GET_BITSET_STR(data, XCSI_CSR_RIPCD)); > > + > > + /* Clk & Lane Info */ > > + dev_info(core->dev, "******** Clock Lane Info *********\n"); > > + data = xcsi2rxss_read(core, XCSI_CLKINFR_OFFSET); > > + dev_info(core->dev, "Clock Lane in Stop State = %s\n", > > + XCSI_GET_BITSET_STR(data, XCSI_CLKINFR_STOP)); > > + > > + dev_info(core->dev, "******** Data Lane Info *********\n"); > > + dev_info(core->dev, "Lane\tSoT Error\tSoT Sync Error\tStop State\n"); > > + reg = XCSI_DLXINFR_OFFSET; > > + for (i = 0; i < XCSI_MAXDL_COUNT; i++) { > > + data = xcsi2rxss_read(core, reg); > > + > > + dev_info(core->dev, "%d\t%s\t\t%s\t\t%s\n", i, > > + XCSI_GET_BITSET_STR(data, XCSI_DLXINFR_SOTERR), > > + XCSI_GET_BITSET_STR(data, XCSI_DLXINFR_SOTSYNCERR), > > + XCSI_GET_BITSET_STR(data, XCSI_DLXINFR_STOP)); > > + > > + reg += XCSI_NEXTREG_OFFSET; > > + } > > + > > + /* Virtual Channel Image Information */ > > + dev_info(core->dev, "********** Virtual Channel Info > ************\n"); > > + dev_info(core->dev, "VC\tLine Count\tByte Count\tData Type\n"); > > + if (core->en_vcx) > > + max_vc = XCSI_MAX_VCX; > > + else > > + max_vc = XCSI_MAX_VC; > > + > > + reg = XCSI_VCXINF1R_OFFSET; > > + for (i = 0; i < max_vc; i++) { > > + u32 line_count, byte_count, data_type; > > + > > + /* Get line and byte count from VCXINFR1 Register */ > > + data = xcsi2rxss_read(core, reg); > > + byte_count = data & XCSI_VCXINF1R_BYTECOUNT; > > + line_count = data & XCSI_VCXINF1R_LINECOUNT; > > + line_count >>= XCSI_VCXINF1R_LINECOUNT_SHIFT; > > + > > + /* Get data type from VCXINFR2 Register */ > > + reg += XCSI_NEXTREG_OFFSET; > > + data = xcsi2rxss_read(core, reg); > > + data_type = data & XCSI_VCXINF2R_DT; > > + > > + dev_info(core->dev, "%d\t%d\t\t%d\t\t0x%x\n", i, line_count, > > + byte_count, data_type); > > + > > + /* Move to next pair of VC Info registers */ > > + reg += XCSI_NEXTREG_OFFSET; > > + } > > + > > + mutex_unlock(&xcsi2rxss->lock); > > + > > + return 0; > > +} > > + > > +/* > > + * xcsi2rxss_subscribe_event - Subscribe to custom events > > + * receive event. > > + * @sd: V4L2 Sub device > > + * @fh: V4L2 File Handle > > + * @sub: Subcribe event structure > > + * > > + * The driver generates a line buffer full event which the application may > > + * subscribe to. On getting this event, application may stop streaming and > > + * intimate user that something is incorrect in downstream pipeline which > > + * is causing this event. > > + * > > + * Return: 0 on success, errors otherwise > > + */ > > +static int xcsi2rxss_subscribe_event(struct v4l2_subdev *sd, > > + struct v4l2_fh *fh, > > + struct v4l2_event_subscription *sub) > > +{ > > + struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd); > > + int ret; > > + > > + mutex_lock(&xcsi2rxss->lock); > > + > > + switch (sub->type) { > > + case V4L2_EVENT_XILINX_CSI2RX_SLBF: > > + ret = v4l2_event_subscribe(fh, sub, XCSI_MAX_EVENT, NULL); > > Please either use dev_dbg() or propose an API for conveying this > information downstream in the pipeline. > I will use a dev_alert() in the irq handler for this for now and remove this event. > > + break; > > + default: > > + ret = -EINVAL; > > + } > > + > > + mutex_unlock(&xcsi2rxss->lock); > > + > > + return ret; > > +} > > + > > +/** > > + * xcsi2rxss_unsubscribe_event - Unsubscribe from all events registered > > + * @sd: V4L2 Sub device > > + * @fh: V4L2 file handle > > + * @sub: pointer to Event unsubscription structure > > + * > > + * Return: zero on success, else a negative error code. > > + */ > > +static int xcsi2rxss_unsubscribe_event(struct v4l2_subdev *sd, > > + struct v4l2_fh *fh, > > + struct v4l2_event_subscription *sub) > > +{ > > + struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd); > > + int ret; > > + > > + mutex_lock(&xcsi2rxss->lock); > > + ret = v4l2_event_unsubscribe(fh, sub); > > + mutex_unlock(&xcsi2rxss->lock); > > + > > + return ret; > > +} > > + > > +/** > > + * xcsi2rxss_s_ctrl - This is used to set the Xilinx MIPI CSI-2 V4L2 controls > > + * @ctrl: V4L2 control to be set > > + * > > + * This function is used to set the V4L2 controls for the Xilinx MIPI > > + * CSI-2 Rx Subsystem. It is used to set the active lanes in the system. > > + * The event counters can be reset. > > + * > > + * Return: 0 on success, errors otherwise > > + */ > > +static int xcsi2rxss_s_ctrl(struct v4l2_ctrl *ctrl) > > +{ > > + struct xcsi2rxss_state *xcsi2rxss = > > + container_of(ctrl->handler, struct xcsi2rxss_state, > > + ctrl_handler); > > + struct xcsi2rxss_core *core = &xcsi2rxss->core; > > + int ret = 0; > > + > > + mutex_lock(&xcsi2rxss->lock); > > + > > + switch (ctrl->id) { > > + case V4L2_CID_XILINX_CSI2RX_ACT_LANES: > > + /* > > + * This will be called only when "Enable Active Lanes" parameter > > + * is set in design. > > + */ > > + if (core->enable_active_lanes && !xcsi2rxss->streaming) { > > + u32 active_lanes; > > + > > + xcsi2rxss_clr_and_set(core, XCSI_PCR_OFFSET, > > + XCSI_PCR_ACTLANES_MASK, > > + ctrl->val - 1); > > + /* > > + * This delay is to allow the value to reflect as write > > + * and read paths are different. > > + */ > > + udelay(1); > > + active_lanes = xcsi2rxss_read(core, XCSI_PCR_OFFSET); > > + active_lanes &= XCSI_PCR_ACTLANES_MASK; > > + active_lanes++; > > + if (active_lanes != ctrl->val) > > + dev_info(core->dev, "RxByteClkHS absent\n"); > > + dev_dbg(core->dev, "active lanes = %d\n", ctrl->val); > > + } else { > > + ret = -EINVAL; > > + } > > + break; > > + case V4L2_CID_XILINX_CSI2RX_RESET_COUNTERS: > > This is also a debug feature. I'd suggest to remove it. > Will remove it in next version. > > + xcsi2rxss_reset_event_counters(xcsi2rxss); > > + break; > > + default: > > + ret = -EINVAL; > > + break; > > + } > > + > > + mutex_unlock(&xcsi2rxss->lock); > > + > > + return ret; > > +} > > + > > +static int xcsi2rxss_start_stream(struct xcsi2rxss_state *state) > > +{ > > + struct xcsi2rxss_core *core = &state->core; > > + int ret = 0; > > + > > + xcsi2rxss_enable(core); > > + > > + ret = xcsi2rxss_reset(core); > > + if (ret < 0) { > > + state->streaming = false; > > + return ret; > > + } > > + > > + xcsi2rxss_intr_enable(core); > > + state->streaming = true; > > + > > + return ret; > > +} > > + > > +static void xcsi2rxss_stop_stream(struct xcsi2rxss_state *state) > > +{ > > + struct xcsi2rxss_core *core = &state->core; > > + > > + xcsi2rxss_intr_disable(core); > > + xcsi2rxss_disable(core); > > + state->streaming = false; > > +} > > + > > +/** > > + * xcsi2rxss_irq_handler - Interrupt handler for CSI-2 > > + * @irq: IRQ number > > + * @dev_id: Pointer to device state > > + * > > + * In the interrupt handler, a list of event counters are updated for > > + * corresponding interrupts. This is useful to get status / debug. > > + * > > + * In case of stream line buffer full condition, the IP is reset, stopped and > > + * an event is raised. > > + * > > + * Return: IRQ_HANDLED after handling interrupts > > + * IRQ_NONE is no interrupts > > + */ > > +static irqreturn_t xcsi2rxss_irq_handler(int irq, void *dev_id) > > +{ > > + struct xcsi2rxss_state *state = (struct xcsi2rxss_state *)dev_id; > > + struct xcsi2rxss_core *core = &state->core; > > + u32 status; > > + > > + status = xcsi2rxss_read(core, XCSI_ISR_OFFSET) & > XCSI_ISR_ALLINTR_MASK; > > + dev_dbg_ratelimited(core->dev, "interrupt status = 0x%08x\n", status); > > + > > + if (!status) > > + return IRQ_NONE; > > + > > + /* Received a short packet */ > > + if (status & XCSI_ISR_SPFIFONE) { > > + dev_dbg_ratelimited(core->dev, "Short packet = 0x%08x\n", > > + xcsi2rxss_read(core, XCSI_SPKTR_OFFSET)); > > + } > > + > > + /* Short packet FIFO overflow */ > > + if (status & XCSI_ISR_SPFIFOF) > > + dev_alert_ratelimited(core->dev, "Short packet FIFO overflowed\n"); > > + > > + /* > > + * Stream line buffer full > > + * This means there is a backpressure from downstream IP > > + */ > > + if (status & XCSI_ISR_SLBF) { > > + dev_alert_ratelimited(core->dev, "Stream Line Buffer Full!\n"); > > + if (core->rst_gpio) { > > + gpiod_set_value(core->rst_gpio, 1); > > + /* minimum 40 dphy_clk_200M cycles */ > > + ndelay(250); > > + gpiod_set_value(core->rst_gpio, 0); > > + } > > + xcsi2rxss_stop_stream(state); > > + memset(&state->event, 0, sizeof(state->event)); > > + state->event.type = V4L2_EVENT_XILINX_CSI2RX_SLBF; > > + v4l2_subdev_notify_event(&state->subdev, &state->event); > > + } > > + > > + /* Increment event counters */ > > + if (status & XCSI_ISR_ALLINTR_MASK) { > > + unsigned int i; > > + > > + for (i = 0; i < XCSI_NUM_EVENTS; i++) { > > + if (!(status & core->events[i].mask)) > > + continue; > > + core->events[i].counter++; > > + dev_dbg_ratelimited(core->dev, "%s: %d\n", > > + core->events[i].name, > > + core->events[i].counter); > > + } > > + > > + if (status & XCSI_ISR_VCXFE && core->en_vcx) { > > + u32 vcxstatus; > > + > > + vcxstatus = xcsi2rxss_read(core, XCSI_VCXR_OFFSET); > > + vcxstatus &= XCSI_VCXR_VCERR; > > + for (i = 0; i < XCSI_VCX_NUM_EVENTS; i++) { > > + if (!(vcxstatus & core->vcx_events[i].mask)) > > + continue; > > + core->vcx_events[i].counter++; > > + } > > + xcsi2rxss_write(core, XCSI_VCXR_OFFSET, vcxstatus); > > + } > > + } > > + > > + xcsi2rxss_write(core, XCSI_ISR_OFFSET, status); > > + return IRQ_HANDLED; > > +} > > + > > +/** > > + * xcsi2rxss_s_stream - It is used to start/stop the streaming. > > + * @sd: V4L2 Sub device > > + * @enable: Flag (True / False) > > + * > > + * This function controls the start or stop of streaming for the > > + * Xilinx MIPI CSI-2 Rx Subsystem. > > + * > > + * Return: 0 on success, errors otherwise > > + */ > > +static int xcsi2rxss_s_stream(struct v4l2_subdev *sd, int enable) > > +{ > > + struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd); > > + int ret = 0; > > + > > + mutex_lock(&xcsi2rxss->lock); > > + > > + if (enable) { > > + if (!xcsi2rxss->streaming) { > > + /* reset the event counters */ > > + xcsi2rxss_reset_event_counters(xcsi2rxss); > > + ret = xcsi2rxss_start_stream(xcsi2rxss); > > + } > > + } else { > > + if (xcsi2rxss->streaming) { > > + struct gpio_desc *rst = xcsi2rxss->core.rst_gpio; > > + > > + if (rst) { > > + gpiod_set_value_cansleep(rst, 1); > > + usleep_range(1, 2); > > + gpiod_set_value_cansleep(rst, 0); > > + } > > + xcsi2rxss_stop_stream(xcsi2rxss); > > + } > > + } > > + > > + mutex_unlock(&xcsi2rxss->lock); > > + return ret; > > +} > > + > > +static struct v4l2_mbus_framefmt * > > +__xcsi2rxss_get_pad_format(struct xcsi2rxss_state *xcsi2rxss, > > + struct v4l2_subdev_pad_config *cfg, > > + unsigned int pad, u32 which) > > +{ > > + switch (which) { > > + case V4L2_SUBDEV_FORMAT_TRY: > > + return v4l2_subdev_get_try_format(&xcsi2rxss->subdev, cfg, pad); > > + case V4L2_SUBDEV_FORMAT_ACTIVE: > > + return &xcsi2rxss->format; > > + default: > > + return NULL; > > + } > > +} > > + > > +/** > > + * xcsi2rxss_get_format - Get the pad format > > + * @sd: Pointer to V4L2 Sub device structure > > + * @cfg: Pointer to sub device pad information structure > > + * @fmt: Pointer to pad level media bus format > > + * > > + * This function is used to get the pad format information. > > + * > > + * Return: 0 on success > > + */ > > +static int xcsi2rxss_get_format(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_format *fmt) > > +{ > > + struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd); > > + > > + mutex_lock(&xcsi2rxss->lock); > > + fmt->format = *__xcsi2rxss_get_pad_format(xcsi2rxss, cfg, fmt->pad, > > + fmt->which); > > + mutex_unlock(&xcsi2rxss->lock); > > + > > + return 0; > > +} > > + > > +/** > > + * xcsi2rxss_set_format - This is used to set the pad format > > + * @sd: Pointer to V4L2 Sub device structure > > + * @cfg: Pointer to sub device pad information structure > > + * @fmt: Pointer to pad level media bus format > > + * > > + * This function is used to set the pad format. Since the pad format is fixed > > + * in hardware, it can't be modified on run time. So when a format set is > > + * requested by application, all parameters except the format type is saved > > + * for the pad and the original pad format is sent back to the application. > > + * > > + * Return: 0 on success > > + */ > > +static int xcsi2rxss_set_format(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_format *fmt) > > +{ > > + struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd); > > + struct xcsi2rxss_core *core = &xcsi2rxss->core; > > + struct v4l2_mbus_framefmt *__format; > > + > > + /* only sink pad format can be updated */ > > + mutex_lock(&xcsi2rxss->lock); > > + > > + /* > > + * Only the format->code parameter matters for CSI as the > > + * CSI format cannot be changed at runtime. > > + * Ensure that format to set is copied to over to CSI pad format > > + */ > > + __format = __xcsi2rxss_get_pad_format(xcsi2rxss, cfg, > > + fmt->pad, fmt->which); > > + > > + if (fmt->pad == XVIP_PAD_SOURCE) { > > + fmt->format = *__format; > > + mutex_unlock(&xcsi2rxss->lock); > > + return 0; > > + } > > + > > + /* > > + * RAW8 is supported in all datatypes. So if requested media bus format > > + * is of RAW8 type, then allow to be set. In case core is configured to > > + * other RAW, YUV422 8/10 or RGB888, set appropriate media bus > format. > > + */ > > + if ((fmt->format.code == MEDIA_BUS_FMT_SBGGR8_1X8 || > > + fmt->format.code == MEDIA_BUS_FMT_SGBRG8_1X8 || > > + fmt->format.code == MEDIA_BUS_FMT_SGRBG8_1X8 || > > + fmt->format.code == MEDIA_BUS_FMT_SRGGB8_1X8) || > > + (core->datatype == XCSI_DT_RAW10 && > > + (fmt->format.code == MEDIA_BUS_FMT_SBGGR10_1X10 || > > + fmt->format.code == MEDIA_BUS_FMT_SGBRG10_1X10 || > > + fmt->format.code == MEDIA_BUS_FMT_SGRBG10_1X10 || > > + fmt->format.code == MEDIA_BUS_FMT_SRGGB10_1X10)) || > > + (core->datatype == XCSI_DT_RAW12 && > > + (fmt->format.code == MEDIA_BUS_FMT_SBGGR12_1X12 || > > + fmt->format.code == MEDIA_BUS_FMT_SGBRG12_1X12 || > > + fmt->format.code == MEDIA_BUS_FMT_SGRBG12_1X12 || > > + fmt->format.code == MEDIA_BUS_FMT_SRGGB12_1X12)) || > > + (core->datatype == XCSI_DT_RAW14 && > > + (fmt->format.code == MEDIA_BUS_FMT_SBGGR14_1X14 || > > + fmt->format.code == MEDIA_BUS_FMT_SGBRG14_1X14 || > > + fmt->format.code == MEDIA_BUS_FMT_SGRBG14_1X14 || > > + fmt->format.code == MEDIA_BUS_FMT_SRGGB14_1X14)) || > > + (core->datatype == XCSI_DT_RAW16 && > > + (fmt->format.code == MEDIA_BUS_FMT_SBGGR16_1X16 || > > + fmt->format.code == MEDIA_BUS_FMT_SGBRG16_1X16 || > > + fmt->format.code == MEDIA_BUS_FMT_SGRBG16_1X16 || > > + fmt->format.code == MEDIA_BUS_FMT_SRGGB16_1X16)) || > > + (core->datatype == XCSI_DT_YUV4228B && > > + fmt->format.code == MEDIA_BUS_FMT_UYVY8_1X16) || > > + (core->datatype == XCSI_DT_YUV42210B && > > + fmt->format.code == MEDIA_BUS_FMT_UYVY10_1X20) || > > + (core->datatype == XCSI_DT_RGB888 && > > + fmt->format.code == MEDIA_BUS_FMT_RBG888_1X24)) { > > + /* Copy over the format to be set */ > > + *__format = fmt->format; > > + } else { > > + /* Restore the original pad format code */ > > + dev_dbg(core->dev, "Unsupported media bus format"); > > + fmt->format.code = __format->code; > > + *__format = fmt->format; > > You can do the assignment outside the conditional expression. > Ok I will take care of this in next version. > > + } > > + > > + mutex_unlock(&xcsi2rxss->lock); > > + > > + return 0; > > +} > > + > > +/* > > + * xcsi2rxss_enum_mbus_code - Handle pixel format enumeration > > + * @sd : pointer to v4l2 subdev structure > > + * @cfg: V4L2 subdev pad configuration > > + * @code : pointer to v4l2_subdev_mbus_code_enum structure > > + * > > + * Return: -EINVAL or zero on success > > + */ > > +int xcsi2rxss_enum_mbus_code(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_mbus_code_enum *code) > > +{ > > + struct xcsi2rxss_state *state = to_xcsi2rxssstate(sd); > > + > > + if (code->pad >= XCSI_MEDIA_PADS || > > The pad is already checked by the IOCTL handler. Please remove it from > here. > Ok. I will remove it in next version. > > + code->index > state->mbus_fmts_count) > > + return -EINVAL; > > + > > + code->code = state->mbus_fmts[code->index]; > > + > > + return 0; > > +} > > + > > +/** > > + * xcsi2rxss_open - Called on v4l2_open() > > + * @sd: Pointer to V4L2 sub device structure > > + * @fh: Pointer to V4L2 File handle > > + * > > + * This function is called on v4l2_open(). It sets the default format > > + * for both pads. > > + * > > + * Return: 0 on success > > + */ > > +static int xcsi2rxss_open(struct v4l2_subdev *sd, > > + struct v4l2_subdev_fh *fh) > > +{ > > + struct xcsi2rxss_state *xcsi2rxss = to_xcsi2rxssstate(sd); > > + struct v4l2_mbus_framefmt *format; > > + unsigned int i; > > + > > + for (i = 0; i < XCSI_MEDIA_PADS; i++) { > > + format = v4l2_subdev_get_try_format(sd, fh->pad, i); > > + *format = xcsi2rxss->default_format; > > + } > > + > > + return 0; > > +} > > + > > +/* ----------------------------------------------------------------------------- > > + * Media Operations > > + */ > > + > > +static const struct media_entity_operations xcsi2rxss_media_ops = { > > + .link_validate = v4l2_subdev_link_validate > > +}; > > + > > +static const struct v4l2_ctrl_ops xcsi2rxss_ctrl_ops = { > > + .s_ctrl = xcsi2rxss_s_ctrl > > +}; > > + > > +static struct v4l2_ctrl_config xcsi2rxss_ctrls[] = { > > + { > > + .ops = &xcsi2rxss_ctrl_ops, > > + .id = V4L2_CID_XILINX_CSI2RX_ACT_LANES, > > + .name = "Active Lanes", > > + .type = V4L2_CTRL_TYPE_INTEGER, > > + .min = 1, > > + .max = 4, > > + .step = 1, > > + .def = 1, > > + }, { > > + .ops = &xcsi2rxss_ctrl_ops, > > + .id = V4L2_CID_XILINX_CSI2RX_RESET_COUNTERS, > > + .name = "Reset Counters", > > + .type = V4L2_CTRL_TYPE_BUTTON, > > + .min = 0, > > + .max = 1, > > + .step = 1, > > + .def = 0, > > + .flags = V4L2_CTRL_FLAG_WRITE_ONLY, > > + } > > +}; > > + > > +static const struct v4l2_subdev_core_ops xcsi2rxss_core_ops = { > > + .log_status = xcsi2rxss_log_status, > > + .subscribe_event = xcsi2rxss_subscribe_event, > > + .unsubscribe_event = xcsi2rxss_unsubscribe_event > > +}; > > + > > +static const struct v4l2_subdev_video_ops xcsi2rxss_video_ops = { > > + .s_stream = xcsi2rxss_s_stream > > +}; > > + > > +static const struct v4l2_subdev_pad_ops xcsi2rxss_pad_ops = { > > + .get_fmt = xcsi2rxss_get_format, > > + .set_fmt = xcsi2rxss_set_format, > > + .enum_mbus_code = xcsi2rxss_enum_mbus_code, > > +}; > > + > > +static const struct v4l2_subdev_ops xcsi2rxss_ops = { > > + .core = &xcsi2rxss_core_ops, > > + .video = &xcsi2rxss_video_ops, > > + .pad = &xcsi2rxss_pad_ops > > +}; > > + > > +static const struct v4l2_subdev_internal_ops xcsi2rxss_internal_ops = { > > + .open = xcsi2rxss_open, > > +}; > > + > > +static void xcsi2rxss_set_default_format(struct xcsi2rxss_state *state) > > +{ > > + struct xcsi2rxss_core *core = &state->core; > > + > > + memset(&state->default_format, 0, sizeof(state->default_format)); > > + > > + switch (core->datatype) { > > + case XCSI_DT_YUV4228B: > > + state->default_format.code = MEDIA_BUS_FMT_UYVY8_1X16; > > + break; > > + case XCSI_DT_RGB888: > > + state->default_format.code = MEDIA_BUS_FMT_RBG888_1X24; > > + break; > > + case XCSI_DT_YUV42210B: > > + state->default_format.code = MEDIA_BUS_FMT_UYVY10_1X20; > > + break; > > + case XCSI_DT_RAW10: > > + state->default_format.code = MEDIA_BUS_FMT_SRGGB10_1X10; > > + break; > > + case XCSI_DT_RAW12: > > + state->default_format.code = MEDIA_BUS_FMT_SRGGB12_1X12; > > + break; > > + case XCSI_DT_RAW14: > > + state->default_format.code = MEDIA_BUS_FMT_SRGGB14_1X14; > > + break; > > + case XCSI_DT_RAW16: > > + state->default_format.code = MEDIA_BUS_FMT_SRGGB16_1X16; > > + break; > > + case XCSI_DT_RAW8: > > + case XCSI_DT_RGB444: > > + case XCSI_DT_RGB555: > > + case XCSI_DT_RGB565: > > + case XCSI_DT_RGB666: > > + state->default_format.code = MEDIA_BUS_FMT_SRGGB8_1X8; > > + break; > > + } > > + > > + state->default_format.field = V4L2_FIELD_NONE; > > + state->default_format.colorspace = V4L2_COLORSPACE_SRGB; > > + state->default_format.width = XCSI_DEFAULT_WIDTH; > > + state->default_format.height = XCSI_DEFAULT_HEIGHT; > > + > > + dev_dbg(core->dev, "default mediabus format = 0x%x", > > + state->default_format.code); > > +} > > + > > +static void xcsi2rxss_init_mbus_fmts(struct xcsi2rxss_state *state) > > +{ > > + struct xcsi2rxss_core *core = &state->core; > > + u32 i = 0; > > + > > + state->mbus_fmts[i++] = MEDIA_BUS_FMT_SRGGB8_1X8; > > + state->mbus_fmts[i++] = MEDIA_BUS_FMT_SBGGR8_1X8; > > + state->mbus_fmts[i++] = MEDIA_BUS_FMT_SGRBG8_1X8; > > + state->mbus_fmts[i++] = MEDIA_BUS_FMT_SGBRG8_1X8; > > + > > + switch (core->datatype) { > > + case XCSI_DT_RAW10: > > + state->mbus_fmts[i++] = MEDIA_BUS_FMT_SRGGB10_1X10; > > + state->mbus_fmts[i++] = MEDIA_BUS_FMT_SBGGR10_1X10; > > + state->mbus_fmts[i++] = MEDIA_BUS_FMT_SGRBG10_1X10; > > + state->mbus_fmts[i++] = MEDIA_BUS_FMT_SGBRG10_1X10; > > + break; > > + case XCSI_DT_RAW12: > > + state->mbus_fmts[i++] = MEDIA_BUS_FMT_SRGGB12_1X12; > > + state->mbus_fmts[i++] = MEDIA_BUS_FMT_SBGGR12_1X12; > > + state->mbus_fmts[i++] = MEDIA_BUS_FMT_SGRBG12_1X12; > > + state->mbus_fmts[i++] = MEDIA_BUS_FMT_SGBRG12_1X12; > > + break; > > + case XCSI_DT_RAW14: > > + state->mbus_fmts[i++] = MEDIA_BUS_FMT_SRGGB14_1X14; > > + state->mbus_fmts[i++] = MEDIA_BUS_FMT_SBGGR14_1X14; > > + state->mbus_fmts[i++] = MEDIA_BUS_FMT_SGRBG14_1X14; > > + state->mbus_fmts[i++] = MEDIA_BUS_FMT_SGBRG14_1X14; > > + break; > > + case XCSI_DT_RAW16: > > + state->mbus_fmts[i++] = MEDIA_BUS_FMT_SRGGB16_1X16; > > + state->mbus_fmts[i++] = MEDIA_BUS_FMT_SBGGR16_1X16; > > + state->mbus_fmts[i++] = MEDIA_BUS_FMT_SGRBG16_1X16; > > + state->mbus_fmts[i++] = MEDIA_BUS_FMT_SGBRG16_1X16; > > + break; > > + case XCSI_DT_YUV4228B: > > + state->mbus_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16; > > + break; > > + case XCSI_DT_RGB888: > > + state->mbus_fmts[i++] = MEDIA_BUS_FMT_RBG888_1X24; > > + break; > > + case XCSI_DT_YUV42210B: > > + state->mbus_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20; > > + break; > > This is only used for mbus format enumeration. Could you instead construct > the enumeration on fly based on the data type? > > Alternatively, it'd be good to have something here to avoid proceeding past > the end of the array (although that doesn't currently happen). > I will add a check to throw an error in case array out of bounds access occurs. > > + } > > + > > + state->mbus_fmts_count = i; > > +} > > + > > +static int xcsi2rxss_parse_of(struct xcsi2rxss_state *xcsi2rxss) > > +{ > > + struct xcsi2rxss_core *core = &xcsi2rxss->core; > > + struct device_node *node = xcsi2rxss->core.dev->of_node; > > + struct device_node *ports = NULL; > > + struct device_node *port = NULL; > > + unsigned int nports, irq; > > + bool en_csi_v20, vfb; > > + int ret; > > + > > + en_csi_v20 = of_property_read_bool(node, "xlnx,en-csi-v2-0"); > > + if (en_csi_v20) > > + core->en_vcx = of_property_read_bool(node, "xlnx,en-vcx"); > > + > > + core->enable_active_lanes = > > + of_property_read_bool(node, "xlnx,en-active-lanes"); > > + > > + ret = of_property_read_u32(node, "xlnx,csi-pxl-format", > > + &core->datatype); > > + if (ret < 0) { > > + dev_err(core->dev, "missing xlnx,csi-pxl-format property\n"); > > + return ret; > > + } > > + > > + switch (core->datatype) { > > + case XCSI_DT_YUV4228B: > > + case XCSI_DT_RGB444: > > + case XCSI_DT_RGB555: > > + case XCSI_DT_RGB565: > > + case XCSI_DT_RGB666: > > + case XCSI_DT_RGB888: > > + case XCSI_DT_RAW6: > > + case XCSI_DT_RAW7: > > + case XCSI_DT_RAW8: > > + case XCSI_DT_RAW10: > > + case XCSI_DT_RAW12: > > + case XCSI_DT_RAW14: > > + break; > > + case XCSI_DT_YUV42210B: > > + case XCSI_DT_RAW16: > > + case XCSI_DT_RAW20: > > + if (!en_csi_v20) { > > + ret = -EINVAL; > > + dev_dbg(core->dev, "enable csi v2 for this pixel format"); > > + } > > + break; > > + default: > > + ret = -EINVAL; > > + } > > + if (ret < 0) { > > + dev_err(core->dev, "invalid csi-pxl-format property!\n"); > > + return ret; > > + } > > + > > + vfb = of_property_read_bool(node, "xlnx,vfb"); > > + if (!vfb) { > > + dev_err(core->dev, "failed as VFB is disabled!\n"); > > + return -EINVAL; > > + } > > + > > + ports = of_get_child_by_name(node, "ports"); > > + if (!ports) > > + ports = node; > > + > > + nports = 0; > > + for_each_child_of_node(ports, port) { > > + struct device_node *endpoint; > > + struct v4l2_fwnode_endpoint v4lendpoint; > > + int ret; > > + > > + if (!port->name || of_node_cmp(port->name, "port")) > > + continue; > > + > > + endpoint = of_get_next_child(port, NULL); > > + if (!endpoint) { > > + dev_err(core->dev, "No port at\n"); > > + return -EINVAL; > > + } > > + > > + /* > > + * since first port is sink port and it contains > > + * all info about data-lanes and cfa-pattern, > > + * don't parse second port but only check if exists > > + */ > > + if (nports == XVIP_PAD_SOURCE) { > > + dev_dbg(core->dev, "no need to parse source port"); > > + nports++; > > + of_node_put(endpoint); > > + continue; > > + } > > + > > + ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(endpoint), > > + &v4lendpoint); > > + of_node_put(endpoint); > > + if (ret) > > + return ret; > > + > > + dev_dbg(core->dev, "%s : port %d bus type = %d\n", > > + __func__, nports, v4lendpoint.bus_type); > > + > > + if (v4lendpoint.bus_type == V4L2_MBUS_CSI2_DPHY) { > > + dev_dbg(core->dev, "%s : base.port = %d base.id = %d\n", > > + __func__, v4lendpoint.base.port, > > + v4lendpoint.base.id); > > + > > + dev_dbg(core->dev, "%s : mipi number lanes = %d\n", > > + __func__, > > + v4lendpoint.bus.mipi_csi2.num_data_lanes); > > + > > + core->max_num_lanes = > > + v4lendpoint.bus.mipi_csi2.num_data_lanes; > > + } > > + > > + /* Count the number of ports. */ > > + nports++; > > + } > > + > > + if (nports != XCSI_MEDIA_PADS) { > > + dev_err(core->dev, "invalid number of ports %u\n", nports); > > + return -EINVAL; > > + } > > + > > + /* Register interrupt handler */ > > + irq = irq_of_parse_and_map(node, 0); > > + ret = devm_request_irq(core->dev, irq, xcsi2rxss_irq_handler, > > + IRQF_SHARED, "xilinx-csi2rxss", xcsi2rxss); > > + if (ret) { > > + dev_err(core->dev, "Err = %d Interrupt handler reg failed!\n", > > + ret); > > + return ret; > > + } > > + > > + xcsi2rxss_log_ipconfig(xcsi2rxss); > > + > > + return 0; > > +} > > + > > +static int xcsi2rxss_probe(struct platform_device *pdev) > > +{ > > + struct v4l2_subdev *subdev; > > + struct xcsi2rxss_state *xcsi2rxss; > > + struct xcsi2rxss_core *core; > > + struct resource *res; > > + int ret, num_ctrls, i; > > + > > + xcsi2rxss = devm_kzalloc(&pdev->dev, sizeof(*xcsi2rxss), GFP_KERNEL); > > + if (!xcsi2rxss) > > + return -ENOMEM; > > + > > + core = &xcsi2rxss->core; > > + core->dev = &pdev->dev; > > + > > + core->clks = devm_kmemdup(core->dev, xcsi2rxss_clks, > > + sizeof(xcsi2rxss_clks), GFP_KERNEL); > > + if (!core->clks) > > + return -ENOMEM; > > + > > + /* Reset GPIO */ > > + core->rst_gpio = devm_gpiod_get_optional(core->dev, "reset", > > + GPIOD_OUT_HIGH); > > + if (IS_ERR(core->rst_gpio)) { > > + if (PTR_ERR(core->rst_gpio) != -EPROBE_DEFER) > > + dev_err(core->dev, "Video Reset GPIO not setup in DT"); > > + return PTR_ERR(core->rst_gpio); > > + } > > + > > + mutex_init(&xcsi2rxss->lock); > > + > > + ret = xcsi2rxss_parse_of(xcsi2rxss); > > + if (ret < 0) > > + return ret; > > + > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > + core->iomem = devm_ioremap_resource(core->dev, res); > > + if (IS_ERR(core->iomem)) > > + return PTR_ERR(core->iomem); > > + > > + core->num_clks = ARRAY_SIZE(xcsi2rxss_clks); > > + > > + ret = clk_bulk_get(core->dev, core->num_clks, core->clks); > > + if (ret) > > + return ret; > > + > > + ret = clk_bulk_prepare_enable(core->num_clks, core->clks); > > + if (ret) > > + goto err_clk_put; > > + > > + if (xcsi2rxss->core.rst_gpio) { > > + gpiod_set_value_cansleep(xcsi2rxss->core.rst_gpio, 1); > > + /* minimum of 40 dphy_clk_200M cycles */ > > + usleep_range(1, 2); > > + gpiod_set_value_cansleep(xcsi2rxss->core.rst_gpio, 0); > > + } > > + > > + xcsi2rxss_reset(core); > > + > > + core->events = devm_kzalloc(&pdev->dev, sizeof(xcsi2rxss_events), > > + GFP_KERNEL); > > + for (i = 0; i < XCSI_NUM_EVENTS; i++) { > > + core->events[i].name = xcsi2rxss_events[i].name; > > + core->events[i].mask = xcsi2rxss_events[i].mask; > > + } > > + > > + if (core->en_vcx) { > > + u32 alloc_size; > > + > > + alloc_size = sizeof(struct xcsi2rxss_event) * > > + XCSI_VCX_NUM_EVENTS; > > + core->vcx_events = devm_kzalloc(&pdev->dev, alloc_size, > > + GFP_KERNEL); > > + if (!core->vcx_events) { > > + mutex_destroy(&xcsi2rxss->lock); > > + ret = -ENOMEM; > > + goto err_clk_disable; > > + } > > + > > + for (i = 0; i < XCSI_VCX_NUM_EVENTS; i++) > > + core->vcx_events[i].mask = 1 << i; > > + } > > + > > + /* Initialize V4L2 subdevice and media entity */ > > + xcsi2rxss->pads[XVIP_PAD_SINK].flags = MEDIA_PAD_FL_SINK; > > + xcsi2rxss->pads[XVIP_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; > > + > > + /* Initialize the default format */ > > + xcsi2rxss_set_default_format(xcsi2rxss); > > + > > + /* Initialize the mbus formats supported */ > > + xcsi2rxss_init_mbus_fmts(xcsi2rxss); > > + > > + /* Initialize V4L2 subdevice and media entity */ > > + subdev = &xcsi2rxss->subdev; > > + v4l2_subdev_init(subdev, &xcsi2rxss_ops); > > + subdev->dev = &pdev->dev; > > + subdev->internal_ops = &xcsi2rxss_internal_ops; > > + strscpy(subdev->name, dev_name(&pdev->dev), sizeof(subdev->name)); > > + subdev->flags |= V4L2_SUBDEV_FL_HAS_EVENTS | > V4L2_SUBDEV_FL_HAS_DEVNODE; > > + subdev->entity.ops = &xcsi2rxss_media_ops; > > + v4l2_set_subdevdata(subdev, xcsi2rxss); > > + > > + ret = media_entity_pads_init(&subdev->entity, XCSI_MEDIA_PADS, > > + xcsi2rxss->pads); > > + if (ret < 0) > > + goto error; > > + > > + /* > > + * In case the Enable Active Lanes config parameter is not set, > > + * dynamic lane reconfiguration is not allowed. > > + * So V4L2_CID_XILINX_CSI2RX_ACT_LANES ctrl will not be registered. > > + * Accordingly allocate the number of controls > > + */ > > + num_ctrls = ARRAY_SIZE(xcsi2rxss_ctrls); > > + > > + if (!core->enable_active_lanes) > > + num_ctrls--; > > + > > + v4l2_ctrl_handler_init(&xcsi2rxss->ctrl_handler, num_ctrls); > > + for (i = 0; i < ARRAY_SIZE(xcsi2rxss_ctrls); i++) { > > + struct v4l2_ctrl *ctrl; > > + > > + if (xcsi2rxss_ctrls[i].id == > > + V4L2_CID_XILINX_CSI2RX_ACT_LANES) { > > + if (!core->enable_active_lanes) { > > + /* Don't register control */ > > + dev_dbg(core->dev, > > + "Skip active lane control\n"); > > + continue; > > + } > > + xcsi2rxss_ctrls[i].max = core->max_num_lanes; > > + xcsi2rxss_ctrls[i].def = core->max_num_lanes; > > + } > > + > > + dev_dbg(core->dev, "%d ctrl = 0x%x\n", i, > > + xcsi2rxss_ctrls[i].id); > > + ctrl = v4l2_ctrl_new_custom(&xcsi2rxss->ctrl_handler, > > + &xcsi2rxss_ctrls[i], NULL); > > + if (!ctrl) { > > + dev_err(core->dev, "Failed for %s ctrl\n", > > + xcsi2rxss_ctrls[i].name); > > + goto error; > > + } > > + } > > + > > + if (xcsi2rxss->ctrl_handler.error) { > > + dev_err(core->dev, "failed to add controls\n"); > > + ret = xcsi2rxss->ctrl_handler.error; > > + goto error; > > + } > > + > > + subdev->ctrl_handler = &xcsi2rxss->ctrl_handler; > > + ret = v4l2_ctrl_handler_setup(&xcsi2rxss->ctrl_handler); > > + if (ret < 0) { > > + dev_err(core->dev, "failed to set controls\n"); > > + goto error; > > + } > > + > > + platform_set_drvdata(pdev, xcsi2rxss); > > + > > + ret = v4l2_async_register_subdev(subdev); > > + if (ret < 0) { > > + dev_err(core->dev, "failed to register subdev\n"); > > + goto error; > > + } > > + > > + dev_info(core->dev, "Xilinx CSI2 Rx Subsystem device found!\n"); > > + > > + return 0; > > +error: > > + v4l2_ctrl_handler_free(&xcsi2rxss->ctrl_handler); > > + media_entity_cleanup(&subdev->entity); > > + mutex_destroy(&xcsi2rxss->lock); > > +err_clk_disable: > > + clk_bulk_disable_unprepare(core->num_clks, core->clks); > > +err_clk_put: > > + clk_bulk_put(core->num_clks, core->clks); > > + return ret; > > +} > > + > > +static int xcsi2rxss_remove(struct platform_device *pdev) > > +{ > > + struct xcsi2rxss_state *xcsi2rxss = platform_get_drvdata(pdev); > > + struct xcsi2rxss_core *core = &xcsi2rxss->core; > > + struct v4l2_subdev *subdev = &xcsi2rxss->subdev; > > + > > + v4l2_async_unregister_subdev(subdev); > > + v4l2_ctrl_handler_free(&xcsi2rxss->ctrl_handler); > > + media_entity_cleanup(&subdev->entity); > > + mutex_destroy(&xcsi2rxss->lock); > > + clk_bulk_disable_unprepare(core->num_clks, core->clks); > > + clk_bulk_put(core->num_clks, core->clks); > > + > > + return 0; > > +} > > + > > +static const struct of_device_id xcsi2rxss_of_id_table[] = { > > + { .compatible = "xlnx,mipi-csi2-rx-subsystem-4.0",}, > > Space before closing parenthesis. > I will fix this in next version. > > + { } > > +}; > > +MODULE_DEVICE_TABLE(of, xcsi2rxss_of_id_table); > > + > > +static struct platform_driver xcsi2rxss_driver = { > > + .driver = { > > + .name = "xilinx-csi2rxss", > > + .of_match_table = xcsi2rxss_of_id_table, > > + }, > > + .probe = xcsi2rxss_probe, > > + .remove = xcsi2rxss_remove, > > +}; > > + > > +module_platform_driver(xcsi2rxss_driver); > > + > > +MODULE_AUTHOR("Vishal Sagar "); > > +MODULE_DESCRIPTION("Xilinx MIPI CSI2 Rx Subsystem Driver"); > > +MODULE_LICENSE("GPL v2"); > > diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2- > controls.h > > index a2669b7..98074f2 100644 > > --- a/include/uapi/linux/v4l2-controls.h > > +++ b/include/uapi/linux/v4l2-controls.h > > @@ -192,6 +192,10 @@ enum v4l2_colorfx { > > * We reserve 16 controls for this driver. */ > > #define V4L2_CID_USER_IMX_BASE (V4L2_CID_USER_BASE + > 0x10b0) > > > > +/* The base for the Xilinx MIPI CSI2 Rx Subsystem driver controls. > > + * We reserve 16 controls for this driver. */ > > +#define V4L2_CID_XILINX_CSI2RX_BASE (V4L2_CID_USER_BASE + > 0x10c0) > > + > > /* MPEG-class control IDs */ > > /* The MPEG controls are applicable to all codec controls > > * and the 'MPEG' part of the define is historical */ > > diff --git a/include/uapi/linux/xilinx-csi2rxss.h b/include/uapi/linux/xilinx- > csi2rxss.h > > new file mode 100644 > > index 0000000..79e2797 > > --- /dev/null > > +++ b/include/uapi/linux/xilinx-csi2rxss.h > > @@ -0,0 +1,52 @@ > > +/* SPDX-License-Identifier: GPL-2.0 */ > > +/* > > + * Xilinx MIPI CSI2 Rx Subsystem events and controls > > + * > > + * Copyright (C) 2019 Xilinx, Inc. > > + * > > + * Contacts: Vishal Sagar > > + * > > + */ > > + > > +#ifndef __XILINX_CSI2RXSS_H__ > > +#define __XILINX_CSI2RXSS_H__ > > + > > +#include > > +#include > > + > > +/* Xilinx MIPI CSI2 Rx Subsystem controls */ > > + > > +/* Active Lanes > > + * > > + * This control is used to dynamically set the number of active lanes. > > + * This is present only when the "Enable Active Lanes" is set in design. > > + * It should be called when IP is not streaming. > > + */ > > +#define V4L2_CID_XILINX_CSI2RX_ACT_LANES > (V4L2_CID_XILINX_CSI2RX_BASE + 1) > > + > > +/* Reset all event counters > > + * > > + * The driver has counters to keep a track of different events. These counters > > + * can be printed using the log_status. This control is used to reset these > > + * counters. > > + */ > > +#define V4L2_CID_XILINX_CSI2RX_RESET_COUNTERS > (V4L2_CID_XILINX_CSI2RX_BASE + 2) > > + > > +/* Xilinx MIPI CSI2 Rx Subsystem events */ > > + > > +/* Base class */ > > +#define V4L2_EVENT_XILINX_CSI2RX_CLASS > (V4L2_EVENT_PRIVATE_START | 0x200) > > + > > +/* Stream Line Buffer full event > > + * > > + * This event occurs when the MIPI CSI2 Rx Subsystem's line buffer is full. > > + * This occurs because of back pressure from some downstream IP i.e. > > + * the downstream IP isn't ready to accept data. This is usually due to some > > + * system design issue. > > + * > > + * When this event occurs, application may stop streaming, inform the user > > + * about the issue and exit. > > + */ > > +#define V4L2_EVENT_XILINX_CSI2RX_SLBF > (V4L2_EVENT_XILINX_CSI2RX_CLASS | 0x1) > > + > > +#endif /* __XILINX_CSI2RXSS_H__ */ > > -- > Regards, > > Sakari Ailus Regards Vishal Sagar _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel