From mboxrd@z Thu Jan 1 00:00:00 1970 From: rajesh.bhagat@nxp.com (Rajesh Bhagat) Date: Tue, 12 Jul 2016 03:59:14 +0000 Subject: [PATCH v2 2/5] usb: DT binding documentation for qoriq usb 2.0 controller In-Reply-To: <20160711064845.GH31647@shlinux2> References: <1468038656-10345-1-git-send-email-rajesh.bhagat@nxp.com> <1468038656-10345-3-git-send-email-rajesh.bhagat@nxp.com> <20160711064845.GH31647@shlinux2> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org > -----Original Message----- > From: Peter Chen [mailto:hzpeterchen at gmail.com] > Sent: Monday, July 11, 2016 12:19 PM > To: Rajesh Bhagat > Cc: linux-usb at vger.kernel.org; linux-kernel at vger.kernel.org; > devicetree at vger.kernel.org; Peter Chen ; > gregkh at linuxfoundation.org; kishon at ti.com; robh+dt at kernel.org; > shawnguo at kernel.org; linux-arm-kernel at lists.infradead.org > Subject: Re: [PATCH v2 2/5] usb: DT binding documentation for qoriq usb 2.0 > controller > > On Sat, Jul 09, 2016 at 10:00:53AM +0530, Rajesh Bhagat wrote: > > Describes the qoriq usb 2.0 controller driver binding, currently used > > for LS1021A and LS1012A platform. > > > > Signed-off-by: Rajesh Bhagat > > --- > > Changes in v2: > > - Adds DT binding documentation for qoriq usb 2.0 controller > > - Changed the compatible string to fsl,ci-qoriq-usb2 > > > > .../devicetree/bindings/usb/ci-hdrc-qoriq.txt | 34 > ++++++++++++++++++++++ > > 1 file changed, 34 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/usb/ci-hdrc-qoriq.txt > > > > diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-qoriq.txt > > b/Documentation/devicetree/bindings/usb/ci-hdrc-qoriq.txt > > new file mode 100644 > > index 0000000..8ad7306 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-qoriq.txt > > @@ -0,0 +1,34 @@ > > +* Freescale QorIQ SoC USB 2.0 Controllers > > + > > +Required properties: > > +- compatible: Should be "fsl,ci-qoriq-usb2" > > + Wherever applicable, the IP version of the USB controller should > > + also be mentioned (for eg. fsl,ci-qoriq-usb2-vX.Y). > > + where, X.Y is IP version of USB controller. Hello Peter, > > Why you need to add IP version at compatible string? > Does it can't be read out from ID register of Identification Registers. > I agree. Will drop this controller version thing in DTS in v3. > > +- reg: Should contain registers location and length > > +- interrupts: Should contain controller interrupt > > +- phy-names: from the *Generic PHY* bindings > > +- phys: from the *Generic PHY* bindings > > +- clocks: clock provider specifier > > +- clock-names: shall be "usb2-clock" > > +Refer to clk/clock-bindings.txt for generic clock consumer properties > > + > > +Recommended properties: > > +- dr_mode: One of "host" or "peripheral". > > Do you support dual-role? > Yes. We do support both host/peripheral mode. Best Regards, Rajesh Bhagat > > +- phy_type: the type of the phy connected to the core. Should be one > > + of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this > > + property the PORTSC register won't be touched > > + > > +Examples: > > +usb at 8600000 { > > + compatible = "fsl,ci-qoriq-usb2", > > + "fsl,ci-qoriq-usb2-v2.5"; > > + reg = <0x0 0x8600000 0x0 0x1000>; > > + interrupts = <0 139 0x4>; > > + phy-names = "usb2-phy"; > > + phys = <&usbphy0>; > > + clock-names = "usb2-clock"; > > + clocks = <&clockgen 4 3>; > > + dr_mode = "host"; > > + phy_type = "ulpi"; > > +}; > > -- > > 2.6.2.198.g614a2ac > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-usb" > > in the body of a message to majordomo at vger.kernel.org More majordomo > > info at http://vger.kernel.org/majordomo-info.html > > -- > > Best Regards, > Peter Chen