From mboxrd@z Thu Jan 1 00:00:00 1970 From: po.liu@nxp.com (Po Liu) Date: Mon, 22 Aug 2016 10:09:18 +0000 Subject: [PATCH v3 2/2] pci/aer: interrupt fixup in the quirk In-Reply-To: <20160729224154.GC13632@localhost> References: <1464242406-20203-1-git-send-email-po.liu@nxp.com> <1465892645-32381-1-git-send-email-po.liu@nxp.com> <1465892645-32381-2-git-send-email-po.liu@nxp.com> <20160729224154.GC13632@localhost> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Bjorn, Sorry for late reply. I checked the updated kernel with Dongdong mentioned ACPI patch which was truly affected my quirk patch uploaded. So I suppose the quirk patch is not qualify to fix the bug. I were keep thinking what your "explicitly checking for a root port device" meaning. Do you mean I should upload again the first version patch which fix it in the portdrv_core.c ? I would upload again if yes. Thanks! Best regards, Liu Po > -----Original Message----- > From: Bjorn Helgaas [mailto:helgaas at kernel.org] > Sent: Saturday, July 30, 2016 6:42 AM > To: Po Liu > Cc: linux-pci at vger.kernel.org; linux-arm-kernel at lists.infradead.org; > linux-kernel at vger.kernel.org; devicetree at vger.kernel.org; Roy Zang; Arnd > Bergmann; Marc Zyngier; Stuart Yoder; Yang-Leo Li; Minghuan Lian; Murali > Karicheri; Bjorn Helgaas; Shawn Guo; Mingkai Hu > Subject: Re: [PATCH v3 2/2] pci/aer: interrupt fixup in the quirk > > On Tue, Jun 14, 2016 at 04:24:05PM +0800, Po Liu wrote: > > On some platforms, root port doesn't support MSI/MSI-X/INTx in RC mode. > > When chip support the aer interrupt with none MSI/MSI-X/INTx mode, > > maybe there is interrupt line for aer pme etc. Search the interrupt > > number in the fdt file. Then fixup the dev->irq with it. > > > > Signed-off-by: Po Liu > > I'm not sure where we're at with this. Dongdong had some issue > (possibly with a version of the quirk on a different platform?), and I > think the suggestion of explicitly checking for a root port device was a > good one. > > So please update and repost this for next cycle. > > > --- > > changes for V3: > > - Move to quirk; > > - Only correct the irq in RC mode; > > > > drivers/pci/quirks.c | 29 +++++++++++++++++++++++++++++ > > 1 file changed, 29 insertions(+) > > > > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index > > ee72ebe..8b39cce 100644 > > --- a/drivers/pci/quirks.c > > +++ b/drivers/pci/quirks.c > > @@ -25,6 +25,7 @@ > > #include > > #include > > #include > > +#include > > #include /* isa_dma_bridge_buggy */ > > #include "pci.h" > > > > @@ -4419,3 +4420,31 @@ static void quirk_intel_qat_vf_cap(struct > pci_dev *pdev) > > } > > } > > DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x443, > > quirk_intel_qat_vf_cap); > > + > > +/* If root port doesn't support MSI/MSI-X/INTx in RC mode, > > + * but use standalone irq. Read the device tree for the aer > > + * interrupt number. > > + */ > > +static void quirk_aer_interrupt(struct pci_dev *dev) { > > + int ret; > > + u8 header_type; > > + struct device_node *np = NULL; > > + > > + /* Only for the RC mode device */ > > + pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type); > > + if ((header_type & 0x7F) != PCI_HEADER_TYPE_BRIDGE) > > + return; > > + > > + if (dev->bus->dev.of_node) > > + np = dev->bus->dev.of_node; > > + > > + if (IS_ENABLED(CONFIG_OF_IRQ) && np) { > > + ret = of_irq_get_byname(np, "aer"); > > + if (ret > 0) { > > + dev->no_msi = 1; > > + dev->irq = ret; > > + } > > + } > > +} > > +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, > > +quirk_aer_interrupt); > > -- > > 2.1.0.27.g96db324 > > > > > > _______________________________________________ > > linux-arm-kernel mailing list > > linux-arm-kernel at lists.infradead.org > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel