From: Quentin Perret <qperret@google.com>
To: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Alexandre TORGUE <alexandre.torgue@foss.st.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Sasha Levin <sashal@kernel.org>, stable <stable@vger.kernel.org>,
Arnd Bergmann <arnd@arndb.de>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Nicolas Boichat <drinkcat@chromium.org>,
Stephen Boyd <swboyd@chromium.org>,
KarimAllah Ahmed <karahmed@amazon.de>,
Android Kernel Team <kernel-team@android.com>,
Architecture Mailman List <boot-architecture@lists.linaro.org>,
Frank Rowand <frowand.list@gmail.com>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Subject: Re: [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region
Date: Wed, 21 Apr 2021 08:31:00 +0000 [thread overview]
Message-ID: <YH/ixPnHMxNo08mJ@google.com> (raw)
In-Reply-To: <d7f9607a-9fcb-7ba2-6e39-03030da2deb0@gmail.com>
On Tuesday 20 Apr 2021 at 09:33:56 (-0700), Florian Fainelli wrote:
> I do wonder as well, we have a 32MB "no-map" reserved memory region on
> our platforms located at 0xfe000000. Without the offending commit,
> /proc/iomem looks like this:
>
> 40000000-fdffefff : System RAM
> 40008000-40ffffff : Kernel code
> 41e00000-41ef1d77 : Kernel data
> 100000000-13fffffff : System RAM
>
> and with the patch applied, we have this:
>
> 40000000-fdffefff : System RAM
> 40008000-40ffffff : Kernel code
> 41e00000-41ef3db7 : Kernel data
> fdfff000-ffffffff : System RAM
> 100000000-13fffffff : System RAM
>
> so we can now see that the region 0xfe000000 - 0xfffffff is also cobbled
> up with the preceding region which is a mailbox between Linux and the
> secure monitor at 0xfdfff000 and of size 4KB. It seems like there is
>
> The memblock=debug outputs is also different:
>
> [ 0.000000] MEMBLOCK configuration:
> [ 0.000000] memory size = 0xfdfff000 reserved size = 0x7ce4d20d
> [ 0.000000] memory.cnt = 0x2
> [ 0.000000] memory[0x0] [0x00000040000000-0x000000fdffefff],
> 0xbdfff000 bytes flags: 0x0
> [ 0.000000] memory[0x1] [0x00000100000000-0x0000013fffffff],
> 0x40000000 bytes flags: 0x0
> [ 0.000000] reserved.cnt = 0x6
> [ 0.000000] reserved[0x0] [0x00000040003000-0x0000004000e494],
> 0xb495 bytes flags: 0x0
> [ 0.000000] reserved[0x1] [0x00000040200000-0x00000041ef1d77],
> 0x1cf1d78 bytes flags: 0x0
> [ 0.000000] reserved[0x2] [0x00000045000000-0x000000450fffff],
> 0x100000 bytes flags: 0x0
> [ 0.000000] reserved[0x3] [0x00000047000000-0x0000004704ffff],
> 0x50000 bytes flags: 0x0
> [ 0.000000] reserved[0x4] [0x000000c2c00000-0x000000fdbfffff],
> 0x3b000000 bytes flags: 0x0
> [ 0.000000] reserved[0x5] [0x00000100000000-0x0000013fffffff],
> 0x40000000 bytes flags: 0x0
>
> [ 0.000000] MEMBLOCK configuration:
> [ 0.000000] memory size = 0x100000000 reserved size = 0x7ca4f24d
> [ 0.000000] memory.cnt = 0x3
> [ 0.000000] memory[0x0] [0x00000040000000-0x000000fdffefff],
> 0xbdfff000 bytes flags: 0x0
> [ 0.000000] memory[0x1] [0x000000fdfff000-0x000000ffffffff],
> 0x2001000 bytes flags: 0x4
> [ 0.000000] memory[0x2] [0x00000100000000-0x0000013fffffff],
> 0x40000000 bytes flags: 0x0
> [ 0.000000] reserved.cnt = 0x6
> [ 0.000000] reserved[0x0] [0x00000040003000-0x0000004000e494],
> 0xb495 bytes flags: 0x0
> [ 0.000000] reserved[0x1] [0x00000040200000-0x00000041ef3db7],
> 0x1cf3db8 bytes flags: 0x0
> [ 0.000000] reserved[0x2] [0x00000045000000-0x000000450fffff],
> 0x100000 bytes flags: 0x0
> [ 0.000000] reserved[0x3] [0x00000047000000-0x0000004704ffff],
> 0x50000 bytes flags: 0x0
> [ 0.000000] reserved[0x4] [0x000000c3000000-0x000000fdbfffff],
> 0x3ac00000 bytes flags: 0x0
> [ 0.000000] reserved[0x5] [0x00000100000000-0x0000013fffffff],
> 0x40000000 bytes flags: 0x0
>
> in the second case we can clearly see that the 32MB no-map region is now
> considered as usable RAM.
>
> Hope this helps.
>
> >
> > In any case, the mere fact that this causes a regression should be
> > sufficient justification to revert/withdraw it from v5.4, as I don't
> > see a reason why it was merged there in the first place. (It has no
> > fixes tag or cc:stable)
>
> Agreed, however that means we still need to find out whether a more
> recent kernel is also broken, I should be able to tell you that a little
> later.
FWIW I did test this on Qemu before posting. With 5.12-rc8 and a 1MiB
no-map region at 0x80000000, I have the following:
40000000-7fffffff : System RAM
40210000-417fffff : Kernel code
41800000-41daffff : reserved
41db0000-4210ffff : Kernel data
48000000-48008fff : reserved
80000000-800fffff : reserved
80100000-13fffffff : System RAM
fa000000-ffffffff : reserved
13b000000-13f5fffff : reserved
13f6de000-13f77dfff : reserved
13f77e000-13f77efff : reserved
13f77f000-13f7dafff : reserved
13f7dd000-13f7defff : reserved
13f7df000-13f7dffff : reserved
13f7e0000-13f7f3fff : reserved
13f7f4000-13f7fdfff : reserved
13f7fe000-13fffffff : reserved
If I remove the 'no-map' qualifier from DT, I get this:
40000000-13fffffff : System RAM
40210000-417fffff : Kernel code
41800000-41daffff : reserved
41db0000-4210ffff : Kernel data
48000000-48008fff : reserved
80000000-800fffff : reserved
fa000000-ffffffff : reserved
13b000000-13f5fffff : reserved
13f6de000-13f77dfff : reserved
13f77e000-13f77efff : reserved
13f77f000-13f7dafff : reserved
13f7dd000-13f7defff : reserved
13f7df000-13f7dffff : reserved
13f7e0000-13f7f3fff : reserved
13f7f4000-13f7fdfff : reserved
13f7fe000-13fffffff : reserved
So this does seem to be working fine on my setup. I'll try again with
5.4 to see if I can repro.
Also, 8a5a75e5e9e5 ("of/fdt: Make sure no-map does not remove already
reserved regions") looks more likely to cause the issue observed here,
but that shouldn't be silent. I get the following error message in dmesg
if I if place the no-map region on top of the kernel image:
OF: fdt: Reserved memory: failed to reserve memory for node 'foobar@40210000': base 0x0000000040210000, size 1 MiB
Is that triggering on your end?
Thanks,
Quentin
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-04-21 8:33 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4a4734d6-49df-677b-71d3-b926c44d89a9@foss.st.com>
[not found] ` <CAL_JsqKGG8E9Y53+az+5qAOOGiZRAA-aD-1tKB-hcOp+m3CJYw@mail.gmail.com>
[not found] ` <001f8550-b625-17d2-85a6-98a483557c70@foss.st.com>
2021-04-20 15:54 ` [v5.4 stable] arm: stm32: Regression observed on "no-map" reserved memory region Rob Herring
2021-04-20 16:10 ` Ard Biesheuvel
2021-04-20 16:33 ` Florian Fainelli
2021-04-21 8:31 ` Quentin Perret [this message]
2021-04-21 8:45 ` Quentin Perret
2021-04-21 14:33 ` Florian Fainelli
2021-04-21 15:17 ` Florian Fainelli
2021-04-22 13:03 ` Quentin Perret
2021-04-22 12:59 ` Quentin Perret
2021-05-07 15:15 ` Alexandre TORGUE
2021-05-10 10:09 ` Quentin Perret
2021-05-12 10:55 ` Alexandre TORGUE
2021-05-12 12:34 ` Quentin Perret
2021-05-12 12:44 ` Alexandre TORGUE
2021-04-20 21:05 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YH/ixPnHMxNo08mJ@google.com \
--to=qperret@google.com \
--cc=alexandre.torgue@foss.st.com \
--cc=ardb@kernel.org \
--cc=arnd@arndb.de \
--cc=boot-architecture@lists.linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=drinkcat@chromium.org \
--cc=f.fainelli@gmail.com \
--cc=frowand.list@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=karahmed@amazon.de \
--cc=kernel-team@android.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sashal@kernel.org \
--cc=stable@vger.kernel.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).