From: Stephan Gerhold <stephan@gerhold.net>
To: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
Cc: Rob Herring <robh+dt@kernel.org>, Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Russell King <linux@armlinux.org.uk>,
David Sterba <dsterba@suse.com>, Jens Axboe <axboe@kernel.dk>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Kumar Gala <galak@codeaurora.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 2/2] arm: qcom: Add SMP support for Cortex-A7
Date: Tue, 25 May 2021 14:20:59 +0200 [thread overview]
Message-ID: <YKzrq8V4c2HScgP4@gerhold.net> (raw)
In-Reply-To: <20210513153442.52941-3-bartosz.dudziak@snejp.pl>
Hi,
On Thu, May 13, 2021 at 05:34:42PM +0200, Bartosz Dudziak wrote:
> Implement support for Cortex-A7 CPU release sequence.
>
> Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
> ---
> arch/arm/mach-qcom/platsmp.c | 72 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 72 insertions(+)
>
> diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
> index 630a038f45..10780bf14a 100644
> --- a/arch/arm/mach-qcom/platsmp.c
> +++ b/arch/arm/mach-qcom/platsmp.c
> @@ -29,6 +29,7 @@
> #define COREPOR_RST BIT(5)
> #define CORE_RST BIT(4)
> #define L2DT_SLP BIT(3)
> +#define CORE_MEM_CLAMP BIT(1)
> #define CLAMP BIT(0)
>
> #define APC_PWR_GATE_CTL 0x14
> @@ -75,6 +76,63 @@ static int scss_release_secondary(unsigned int cpu)
> return 0;
> }
>
> +static int cortex_a7_release_secondary(unsigned int cpu)
> +{
> + int ret = 0;
> + void __iomem *reg;
> + struct device_node *cpu_node, *acc_node;
> + u32 reg_val;
> +
> + cpu_node = of_get_cpu_node(cpu, NULL);
> + if (!cpu_node)
> + return -ENODEV;
> +
> + acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
> + if (!acc_node) {
> + ret = -ENODEV;
> + goto out_acc;
> + }
> +
> + reg = of_iomap(acc_node, 0);
> + if (!reg) {
> + ret = -ENOMEM;
> + goto out_acc_map;
> + }
> +
> + /* Put the CPU into reset. */
> + reg_val = CORE_RST | COREPOR_RST | CLAMP | CORE_MEM_CLAMP;
> + writel(reg_val, reg + APCS_CPU_PWR_CTL);
> +
> + /* Turn on the BHS, set the BHS_CNT to 16 XO clock cycles */
> + writel(BHS_EN | (0x10 << BHS_CNT_SHIFT), reg + APC_PWR_GATE_CTL);
> + /* Wait for the BHS to settle */
> + udelay(2);
> +
> + reg_val &= ~CORE_MEM_CLAMP;
> + writel(reg_val, reg + APCS_CPU_PWR_CTL);
> +
> + reg_val |= L2DT_SLP;
> + writel(reg_val, reg + APCS_CPU_PWR_CTL);
> + udelay(2);
> +
> + reg_val = (reg_val | BIT(17)) & ~CLAMP;
> + writel(reg_val, reg + APCS_CPU_PWR_CTL);
> + udelay(2);
> +
> + /* Release CPU out of reset and bring it to life. */
> + reg_val &= ~(CORE_RST | COREPOR_RST);
> + writel(reg_val, reg + APCS_CPU_PWR_CTL);
> + reg_val |= CORE_PWRD_UP;
> + writel(reg_val, reg + APCS_CPU_PWR_CTL);
> +
I think you forgot to add
iounmap(reg);
here :)
> +out_acc_map:
> + of_node_put(acc_node);
> +out_acc:
> + of_node_put(cpu_node);
> +
> + return ret;
> +}
> +
> static int kpssv1_release_secondary(unsigned int cpu)
> {
> int ret = 0;
> @@ -281,6 +339,11 @@ static int msm8660_boot_secondary(unsigned int cpu, struct task_struct *idle)
> return qcom_boot_secondary(cpu, scss_release_secondary);
> }
>
> +static int cortex_a7_boot_secondary(unsigned int cpu, struct task_struct *idle)
> +{
> + return qcom_boot_secondary(cpu, cortex_a7_release_secondary);
> +}
> +
> static int kpssv1_boot_secondary(unsigned int cpu, struct task_struct *idle)
> {
> return qcom_boot_secondary(cpu, kpssv1_release_secondary);
> @@ -315,6 +378,15 @@ static const struct smp_operations smp_msm8660_ops __initconst = {
> };
> CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops);
>
> +static const struct smp_operations qcom_smp_cortex_a7_ops __initconst = {
> + .smp_prepare_cpus = qcom_smp_prepare_cpus,
> + .smp_boot_secondary = cortex_a7_boot_secondary,
> +#ifdef CONFIG_HOTPLUG_CPU
> + .cpu_die = qcom_cpu_die,
> +#endif
> +};
> +CPU_METHOD_OF_DECLARE(qcom_smp_cortex_a7, "qcom,cpss-acc", &qcom_smp_cortex_a7_ops);
> +
I'm a bit curious about the name "CPSS". Is that something you came up
with yourself similar to KPSS? There is a slight naming collision here
with the "Chip peripheral subsystem" (CPSS) on APQ8064E (Snapdragon 600),
see https://developer.qualcomm.com/download/sd600/snapdragon-600-device-spec.pdf
Thanks,
Stephan
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-05-25 12:23 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-13 15:34 [PATCH 0/2] arm: qcom: Add SMP support for Cortex-A7 Bartosz Dudziak
2021-05-13 15:34 ` [PATCH 1/2] dt-bindings: arm: Document qcom,cpss-acc Bartosz Dudziak
2021-05-18 1:13 ` Rob Herring
2021-05-13 15:34 ` [PATCH 2/2] arm: qcom: Add SMP support for Cortex-A7 Bartosz Dudziak
2021-05-25 12:20 ` Stephan Gerhold [this message]
2021-05-25 18:41 ` Bartosz Dudziak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YKzrq8V4c2HScgP4@gerhold.net \
--to=stephan@gerhold.net \
--cc=agross@kernel.org \
--cc=axboe@kernel.dk \
--cc=bartosz.dudziak@snejp.pl \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dsterba@suse.com \
--cc=galak@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=lorenzo.pieralisi@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).