From: Rob Herring <robh@kernel.org>
To: Eugen Hristev <eugen.hristev@microchip.com>
Cc: devicetree@vger.kernel.org, jacopo@jmondi.org,
linux-kernel@vger.kernel.org, sakari.ailus@iki.fi,
laurent.pinchart@ideasonboard.com,
linux-arm-kernel@lists.infradead.org,
linux-media@vger.kernel.org
Subject: Re: [PATCH v2 02/25] dt-bindings: media: atmel: csi2dc: add bindings for microchip csi2dc
Date: Mon, 29 Nov 2021 15:10:26 -0600 [thread overview]
Message-ID: <YaVBwjtEI3xcL551@robh.at.kernel.org> (raw)
In-Reply-To: <20211112142509.2230884-3-eugen.hristev@microchip.com>
On Fri, Nov 12, 2021 at 04:24:46PM +0200, Eugen Hristev wrote:
> Add bindings documentation for Microchip CSI2 Demultiplexer controller.
>
> CSI2DC is a demultiplexer from Synopsys IDI interface specification to
> parallel interface connection or direct memory access.
>
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
> ---
> Changes in v2:
> - changed the endpoint/port references as suggested by Rob
>
> Changes in this version :
> - fixed 'sink' name to be actually source.
> - added dma properties and example with dma
>
> Previous change log:
> Changes in v5:
> - modified bindings as per Rob Herring review
>
> Changes in v4:
> - Removed property for inter-line-delay and for clock continuous/non-continuous
> - Removed virtual channel by reg for second endpoint
>
> Changes in v3:
> - Removed some text from description, as it was explained in the schema
> - fixed other things as per Rob's review
> - moved some text inside the schema, like the clock description
>
> Changes in v2:
> - fixed warnings reported by dt_binding_check
>
> .../bindings/media/microchip,csi2dc.yaml | 159 ++++++++++++++++++
> 1 file changed, 159 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
> new file mode 100644
> index 000000000000..45418c964bf3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
> @@ -0,0 +1,159 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/microchip,csi2dc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Microchip CSI2 Demux Controller (CSI2DC)
> +
> +maintainers:
> + - Eugen Hristev <eugen.hristev@microchip.com>
> +
> +description:
> + CSI2DC - Camera Serial Interface 2 Demux Controller
> +
> + CSI2DC is a hardware block that receives incoming data from an IDI interface
> + and filters packets based on their data type and virtual channel identifier,
> + then converts the byte stream into a cross clock domain to a pixel stream
> + to a parallel interface that can be read by a sensor controller.
> + IDI interface is Synopsys proprietary.
> +
> + CSI2DC provides two pipes, one video pipe and one data pipe. Video pipe
> + is connected to a sensor controller and the data pipe is accessible
> + as a DMA slave port to a DMA controller.
> +
> + CSI2DC supports a single 'port' node as a sink port with Synopsys 32-bit
> + IDI interface. The connected endpoint must be a IDI interface compatible
> + device , that can provide 32-bit IDI interface connection as source port.
> + This port is mandatory.
> +
> + CSI2DC supports one 'port' node as source port with parallel interface.
> + This is called video pipe.
> + This port has an 'endpoint' that can be connected to a sink port of another
> + controller (next in pipeline).
> +
> + CSI2DC also supports direct access to the data through AHB, via DMA channel,
> + called data pipe.
> + Because of this, the source 'port' child node (second) is not mandatory.
> + If the source 'port' child node is missing, only data pipe is available.
> + For data pipe to be available, a dma controller must be referenced.
> +
> +properties:
> + compatible:
> + const: microchip,sama7g5-csi2dc
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 2
> +
> + clock-names:
> + description:
> + CSI2DC must have two clocks to function correctly. One clock is the
> + peripheral clock for the inside functionality of the hardware block.
> + This is named 'pclk'. The second clock must be the cross domain clock,
> + in which CSI2DC will perform clock crossing. This clock must be fed
> + by the next controller in pipeline, which usually is a sensor controller.
> + Normally this clock should be given by this sensor controller who
> + is also a clock source. This clock is named 'scck', sensor controller clock.
> + items:
> + - const: pclk
> + - const: scck
> +
> + dmas:
> + maxItems: 1
> +
> + dma-names:
> + const: rx
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/properties/port
This must be #/$defs/port-base instead of #/properties/port if
video-interfaces.yaml is used.
> + description:
> + Input port node, single endpoint describing the input port.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
But what properties from this do you use? It doesn't look like you need
this?
> + unevaluatedProperties: false
> + description: Endpoint connected to input device
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + Output port node, single endpoint describing the output port.
> +
> + properties:
> + endpoint:
> + unevaluatedProperties: false
> + $ref: video-interfaces.yaml#
> + description: Endpoint connected to output device
> +
> + required:
> + - port@0
> +
> +additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - ports
> +
> +examples:
> + # Example for connecting to a parallel sensor controller block
> + - |
> + csi2dc@e1404000 {
> + compatible = "microchip,sama7g5-csi2dc";
> + reg = <0xe1404000 0x500>;
> + clocks = <&pclk>, <&scck>;
> + clock-names = "pclk", "scck";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + port@0 {
> + reg = <0>; /* must be 0, first child port */
> + csi2dc_in: endpoint { /* input from IDI interface */
> + remote-endpoint = <&csi2host_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>; /* must be 1, second child port */
> + csi2dc_out: endpoint {
> + remote-endpoint = <&xisc_in>; /* output to sensor controller */
> + };
> + };
> + };
> + };
> +
> + # Example for connecting to a DMA master as an AHB slave
> + - |
> + #include <dt-bindings/dma/at91.h>
> + csi2dc@e1404000 {
> + compatible = "microchip,sama7g5-csi2dc";
> + reg = <0xe1404000 0x500>;
> + clocks = <&pclk>, <&scck>;
> + clock-names = "pclk", "scck";
> + dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>;
> + dma-names = "rx";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + port@0 {
> + reg = <0>; /* must be 0, first child port */
> + csi2dc_input: endpoint { /* input from IDI interface */
> + remote-endpoint = <&csi2host_out>;
> + };
> + };
> + };
> + };
> +
> +...
> --
> 2.25.1
>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-11-29 21:28 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-12 14:24 [PATCH v2 00/25] media: atmel: atmel-isc: implement media controller Eugen Hristev
2021-11-12 14:24 ` [PATCH v2 01/25] MAINTAINERS: add microchip csi2dc Eugen Hristev
2021-11-29 23:14 ` Laurent Pinchart
2021-12-13 13:40 ` Nicolas Ferre
2021-11-12 14:24 ` [PATCH v2 02/25] dt-bindings: media: atmel: csi2dc: add bindings for " Eugen Hristev
2021-11-29 21:10 ` Rob Herring [this message]
2021-11-29 21:37 ` Sakari Ailus
2021-12-06 8:57 ` Eugen.Hristev
2021-11-29 23:14 ` Laurent Pinchart
2021-11-12 14:24 ` [PATCH v2 03/25] media: atmel: introduce microchip csi2dc driver Eugen Hristev
2021-12-06 10:51 ` Jacopo Mondi
2021-12-06 11:42 ` Eugen.Hristev
2021-12-06 12:06 ` Jacopo Mondi
2021-12-10 11:07 ` Eugen.Hristev
2021-12-10 12:59 ` Jacopo Mondi
2021-11-12 14:24 ` [PATCH v2 04/25] MAINTAINERS: atmel-isc: add new file atmel-isc-clk.c Eugen Hristev
2021-11-29 23:18 ` Laurent Pinchart
2021-11-12 14:24 ` [PATCH v2 05/25] media: atmel: atmel-isc: split the clock code into separate source file Eugen Hristev
2021-11-12 14:24 ` [PATCH v2 06/25] media: atmel: atmel-isc: replace video device name with module name Eugen Hristev
2021-11-12 14:24 ` [PATCH v2 07/25] media: atmel: atmel-sama7g5-isc: fix ispck leftover Eugen Hristev
2021-11-12 14:24 ` [PATCH v2 08/25] media: atmel: atmel-isc-base: use streaming status when queueing buffers Eugen Hristev
2021-11-12 14:24 ` [PATCH v2 09/25] media: atmel: atmel-isc-base: remove frameintervals VIDIOC Eugen Hristev
2021-11-12 14:24 ` [PATCH v2 10/25] media: atmel: atmel-isc-base: report frame sizes as full supported range Eugen Hristev
2021-11-12 14:24 ` [PATCH v2 11/25] media: atmel: atmel-isc-base: implement mbus_code support in enumfmt Eugen Hristev
2021-11-12 14:24 ` [PATCH v2 12/25] media: atmel: atmel-isc-base: fix bytesperline value for planar formats Eugen Hristev
2021-12-06 16:38 ` Jacopo Mondi
2021-12-07 11:21 ` Eugen.Hristev
2021-11-12 14:24 ` [PATCH v2 13/25] MAINTAINERS: atmel-isc: add new file atmel-isc-mc.c Eugen Hristev
2021-11-12 14:24 ` [PATCH v2 14/25] media: atmel: atmel-isc: implement media controller Eugen Hristev
2021-11-12 14:24 ` [PATCH v2 15/25] ARM: dts: at91: sama7g5: add nodes for video capture Eugen Hristev
2021-11-12 14:25 ` [PATCH v2 16/25] ARM: configs: at91: sama7: add xisc and csi2dc Eugen Hristev
2021-11-12 14:25 ` [PATCH v2 17/25] ARM: multi_v7_defconfig: add atmel video pipeline modules Eugen Hristev
2021-11-12 14:25 ` [PATCH v2 18/25] media: atmel: atmel-sama5d2-isc: fix wrong mask in YUYV format check Eugen Hristev
2021-11-12 14:25 ` [PATCH v2 19/25] media: atmel: atmel-isc-base: use mutex to lock awb workqueue from streaming Eugen Hristev
2021-11-12 14:25 ` [PATCH v2 20/25] media: atmel: atmel-isc-base: add wb debug messages Eugen Hristev
2021-11-12 14:25 ` [PATCH v2 21/25] media: atmel: atmel-isc-base: clamp wb gain coefficients Eugen Hristev
2021-11-12 14:25 ` [PATCH v2 22/25] media: atmel: atmel-sama7g5-isc: fix UYVY input format mbus_code typo Eugen Hristev
2021-11-12 14:25 ` [PATCH v2 23/25] media: atmel: atmel-isc: add raw Bayer 8bit 10bit output formats Eugen Hristev
2021-11-12 14:25 ` [PATCH v2 24/25] media: atmel: atmel-isc: compact the controller formats list Eugen Hristev
2021-11-12 14:25 ` [PATCH v2 25/25] media: atmel: atmel-isc: change format propagation to subdev into only verification Eugen Hristev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YaVBwjtEI3xcL551@robh.at.kernel.org \
--to=robh@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=eugen.hristev@microchip.com \
--cc=jacopo@jmondi.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=sakari.ailus@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).