From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id F253CC433EF for ; Tue, 10 May 2022 18:45:58 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:In-Reply-To:MIME-Version:References: Message-ID:Subject:Cc:To:From:Date:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=ArxOz209e1KDyY23Ol6W4SpyLTkFo7n3RE87+XtHRZA=; b=uZaQN22eCj3HEF pQuwWYe5twg5Rv4a5Zi7VYjojiAJ3yVpVmW70a122SEfK2gsMfhBgOyYzGv0RAPiQshDM7bIFWn43 BQWaCD9hPNqsnuOVUuF51dOs/39NH2VlJb9orU5ep2nsufH+m1gVr7SgTu2okldo8ZuZY7xEARht+ AHfdiDFb2cbDKTS/9eCwn+T9dxVBpZKj3GKYegb3zAzQ7HYwtiyHZKTYkswEfFUzoM7JB7RKk8QCB GnUgEnZxZuO8V15lMI+BUIRX2I6IBuQTbJqn66IsVi7A5rH2UEHL9Uq17GsvNpDdB3SqVfSeLDTox 6fnCALI6Rf7DCgw5VeCg==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1noUqu-003hcv-Ae; Tue, 10 May 2022 18:44:56 +0000 Received: from mail-oa1-f51.google.com ([209.85.160.51]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1noUqo-003hYG-M8; Tue, 10 May 2022 18:44:52 +0000 Received: by mail-oa1-f51.google.com with SMTP id 586e51a60fabf-edf3b6b0f2so35190fac.9; Tue, 10 May 2022 11:44:46 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=MPXufwJAh41IRd4r3GKaRJRRh2QCesjvbaZhsgLi68g=; b=rMnciGRuZ3ZNSPlU9HxCnBIMDAHm87LxxWlpLpzvOOXABufevGMxXlpEw/6sgmVMkY ECt4AnzsO3SrZ0NFv8SdZlLnICTahY1LCVaKEv76SrJnF7JTxuEebfEZFZjZ3Lp6cFqu g54cXpzdydM3zhyCN/0qtth+1ePsgrl24UBNooImZ4XRNLv5nX/aMYLYI4SfgOX6He8J aytxS+XfkIJ6jFvsFORHS4IKiYKARmXuYMhOYW4gLJ+6qbKZSznaUt8NhvZC1SaVZ936 t5UWKJMdCvcDsObQoFAcnYFBN1oy5rYCANrwhQpR4fqtUmJbjeTeYl0wSFNzMyz1cHKO XK2A== X-Gm-Message-State: AOAM533rG01K3/5TJfvG7aCVECvPeIPW61uI6D+uT+DWwQu+W4ER62hs Rax4Z5Rq5M06CNtnrksQBQ== X-Google-Smtp-Source: ABdhPJzEeQ30XaAC+XdOP/iCCrqRWxt4H+g5o3r0bi8VUx/PK0GuMt+t8NV0yPKGTMCLEYpNeWLYhQ== X-Received: by 2002:a05:6870:80cb:b0:ed:aaeb:27e0 with SMTP id r11-20020a05687080cb00b000edaaeb27e0mr883725oab.187.1652208285415; Tue, 10 May 2022 11:44:45 -0700 (PDT) Received: from robh.at.kernel.org (66-90-144-107.dyn.grandenetworks.net. [66.90.144.107]) by smtp.gmail.com with ESMTPSA id b7-20020aca1b07000000b0032698578409sm4324592oib.38.2022.05.10.11.44.44 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 10 May 2022 11:44:44 -0700 (PDT) Received: (nullmailer pid 2376194 invoked by uid 1000); Tue, 10 May 2022 18:44:43 -0000 Date: Tue, 10 May 2022 13:44:43 -0500 From: Rob Herring To: Frank Wunderlich Cc: linux-rockchip@lists.infradead.org, linux-mediatek@lists.infradead.org, Frank Wunderlich , Andrew Lunn , Vivien Didelot , Florian Fainelli , Vladimir Oltean , "David S. Miller" , Jakub Kicinski , Paolo Abeni , Krzysztof Kozlowski , Matthias Brugger , Heiko Stuebner , Sean Wang , Landen Chao , DENG Qingfang , Peter Geis , netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Greg Ungerer , =?iso-8859-1?Q?Ren=E9?= van Dorst , Mauro Carvalho Chehab Subject: Re: [PATCH v3 1/6] dt-bindings: net: dsa: convert binding for mediatek switches Message-ID: References: <20220507170440.64005-1-linux@fw-web.de> <20220507170440.64005-2-linux@fw-web.de> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20220507170440.64005-2-linux@fw-web.de> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220510_114450_774353_30906708 X-CRM114-Status: GOOD ( 37.53 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org On Sat, May 07, 2022 at 07:04:35PM +0200, Frank Wunderlich wrote: > From: Frank Wunderlich > > Convert txt binding to yaml binding for Mediatek switches. > > Signed-off-by: Frank Wunderlich > --- > v3: > - include standalone patch in mt7530 series > - drop some descriptions (gpio-cells,reset-gpios,reset-names) > - drop | from descriptions > - move patternProperties above allOf > > v2: > - rename mediatek.yaml => mediatek,mt7530.yaml > - drop "boolean" in description > - drop description for interrupt-properties > - drop #interrupt-cells as requirement > - example: eth=>ethernet,mdio0=>mdio,comment indention > - replace 0 by GPIO_ACTIVE_HIGH in first example > - use port(s)-pattern from dsa.yaml > - adress/size-cells not added to required because this > is defined at mdio-level inc current dts , not switch level > --- > .../bindings/net/dsa/mediatek,mt7530.yaml | 423 ++++++++++++++++++ > .../devicetree/bindings/net/dsa/mt7530.txt | 327 -------------- > 2 files changed, 423 insertions(+), 327 deletions(-) > create mode 100644 Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml > delete mode 100644 Documentation/devicetree/bindings/net/dsa/mt7530.txt > > diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml > new file mode 100644 > index 000000000000..a7696d1b4a8c > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml > @@ -0,0 +1,423 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/dsa/mediatek,mt7530.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Mediatek MT7530 Ethernet switch > + > +maintainers: > + - Sean Wang > + - Landen Chao > + - DENG Qingfang > + > +description: | > + Port 5 of mt7530 and mt7621 switch is muxed between: > + 1. GMAC5: GMAC5 can interface with another external MAC or PHY. > + 2. PHY of port 0 or port 4: PHY interfaces with an external MAC like 2nd GMAC > + of the SOC. Used in many setups where port 0/4 becomes the WAN port. > + Note: On a MT7621 SOC with integrated switch: 2nd GMAC can only connected to > + GMAC5 when the gpios for RGMII2 (GPIO 22-33) are not used and not > + connected to external component! > + > + Port 5 modes/configurations: > + 1. Port 5 is disabled and isolated: An external phy can interface to the 2nd > + GMAC of the SOC. > + In the case of a build-in MT7530 switch, port 5 shares the RGMII bus with 2nd > + GMAC and an optional external phy. Mind the GPIO/pinctl settings of the SOC! > + 2. Port 5 is muxed to PHY of port 0/4: Port 0/4 interfaces with 2nd GMAC. > + It is a simple MAC to PHY interface, port 5 needs to be setup for xMII mode > + and RGMII delay. > + 3. Port 5 is muxed to GMAC5 and can interface to an external phy. > + Port 5 becomes an extra switch port. > + Only works on platform where external phy TX<->RX lines are swapped. > + Like in the Ubiquiti ER-X-SFP. > + 4. Port 5 is muxed to GMAC5 and interfaces with the 2nd GAMC as 2nd CPU port. > + Currently a 2nd CPU port is not supported by DSA code. > + > + Depending on how the external PHY is wired: > + 1. normal: The PHY can only connect to 2nd GMAC but not to the switch > + 2. swapped: RGMII TX, RX are swapped; external phy interface with the switch as > + a ethernet port. But can't interface to the 2nd GMAC. > + > + Based on the DT the port 5 mode is configured. > + > + Driver tries to lookup the phy-handle of the 2nd GMAC of the master device. > + When phy-handle matches PHY of port 0 or 4 then port 5 set-up as mode 2. > + phy-mode must be set, see also example 2 below! > + * mt7621: phy-mode = "rgmii-txid"; > + * mt7623: phy-mode = "rgmii"; > + > + CPU-Ports need a phy-mode property: > + Allowed values on mt7530 and mt7621: > + - "rgmii" > + - "trgmii" > + On mt7531: > + - "1000base-x" > + - "2500base-x" > + - "sgmii" > + > + > +properties: > + compatible: > + enum: > + - mediatek,mt7530 > + - mediatek,mt7531 > + - mediatek,mt7621 > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 I don't see any child nodes with addresses, so these can be removed. > + > + core-supply: > + description: > + Phandle to the regulator node necessary for the core power. > + > + "#gpio-cells": > + const: 2 > + > + gpio-controller: > + type: boolean > + description: > + if defined, MT7530's LED controller will run on GPIO mode. > + > + "#interrupt-cells": > + const: 1 > + > + interrupt-controller: > + type: boolean Already has a type. Just: interrupt-controller: true > + > + interrupts: > + maxItems: 1 > + > + io-supply: > + description: > + Phandle to the regulator node necessary for the I/O power. > + See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt > + for details for the regulator setup on these boards. > + > + mediatek,mcm: > + type: boolean > + description: > + if defined, indicates that either MT7530 is the part on multi-chip > + module belong to MT7623A has or the remotely standalone chip as the > + function MT7623N reference board provided for. > + > + reset-gpios: > + maxItems: 1 > + > + reset-names: > + const: mcm > + > + resets: > + description: > + Phandle pointing to the system reset controller with line index for > + the ethsys. > + maxItems: 1 > + > +patternProperties: > + "^(ethernet-)?ports$": > + type: object additionalProperties: false > + > + patternProperties: > + "^(ethernet-)?port@[0-9]+$": > + type: object > + description: Ethernet switch ports > + > + unevaluatedProperties: false > + > + properties: > + reg: > + description: > + Port address described must be 5 or 6 for CPU port and from 0 > + to 5 for user ports. > + > + allOf: > + - $ref: dsa-port.yaml# > + - if: > + properties: > + label: > + items: > + - const: cpu > + then: > + required: > + - reg > + - phy-mode > + > +required: > + - compatible > + - reg > + > +allOf: > + - $ref: "dsa.yaml#" > + - if: > + required: > + - mediatek,mcm > + then: > + required: > + - resets > + - reset-names > + else: > + required: > + - reset-gpios > + > + - if: > + required: > + - interrupt-controller > + then: > + required: > + - interrupts This can be expressed as: dependencies: interrupt-controller: [ interrupts ] > + > + - if: > + properties: > + compatible: > + items: > + - const: mediatek,mt7530 > + then: > + required: > + - core-supply > + - io-supply > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include > + mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + switch@0 { > + compatible = "mediatek,mt7530"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + > + core-supply = <&mt6323_vpa_reg>; > + io-supply = <&mt6323_vemc3v3_reg>; > + reset-gpios = <&pio 33 GPIO_ACTIVE_HIGH>; > + > + ports { Use the preferred form: ethernet-ports > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel