Re: [RESEND PATCH v16 mfd 8/8] mfd: ocelot: add support for the vsc7512 chip via spi

From: Lee Jones <lee@kernel.org>
To: Colin Foster <colin.foster@in-advantage.com>
Cc: linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, Terry Bowman <terry.bowman@amd.com>,
	Vladimir Oltean <vladimir.oltean@nxp.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Dan Williams <dan.j.williams@intel.com>,
	Jonathan Cameron <Jonathan.Cameron@huawei.com>,
	UNGLinuxDriver@microchip.com,
	Steen Hegelund <Steen.Hegelund@microchip.com>,
	Lars Povlsen <lars.povlsen@microchip.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Paolo Abeni <pabeni@redhat.com>, Jakub Kicinski <kuba@kernel.org>,
	Eric Dumazet <edumazet@google.com>,
	"David S. Miller" <davem@davemloft.net>,
	Russell King <linux@armlinux.org.uk>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	katie.morris@in-advantage.com
Subject: Re: [RESEND PATCH v16 mfd 8/8] mfd: ocelot: add support for the vsc7512 chip via spi
Date: Thu, 8 Sep 2022 10:44:25 +0100	[thread overview]
Message-ID: <Yxm5eXg5taqn4TEW@google.com> (raw)
In-Reply-To: <20220905162132.2943088-9-colin.foster@in-advantage.com>

On Mon, 05 Sep 2022, Colin Foster wrote:

> The VSC7512 is a networking chip that contains several peripherals. Many of
> these peripherals are currently supported by the VSC7513 and VSC7514 chips,
> but those run on an internal CPU. The VSC7512 lacks this CPU, and must be
> controlled externally.
> 
> Utilize the existing drivers by referencing the chip as an MFD. Add support
> for the two MDIO buses, the internal phys, pinctrl, and serial GPIO.
> 
> Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> ---
> 
> v16
>     * Includes fixups:
>     *  ocelot-core.c add includes device.h, export.h, iopoll.h, ioport,h
>     *  ocelot-spi.c add includes device.h, err.h, errno.h, export.h, 
>        mod_devicetable.h, types.h
>     *  Move kconfig.h from ocelot-spi.c to ocelot.h
>     *  Remove unnecessary byteorder.h
>     * Utilize resource_size() function
> 
> v15
>     * Add missed include bits.h
>     * Clean _SIZE macros to make them all the same width (e.g. 0x004)
>     * Remove unnecessary ret = ...; return ret; calls
>     * Utilize spi_message_init_with_transfers() instead of
>       spi_message_add_tail() calls in the bus_read routine
>     * Utilize HZ_PER_MHZ from units.h instead of a magic number
>     * Remove unnecessary err < 0 checks
>     * Fix typos in comments
> 
> v14
>     * Add Reviewed tag
>     * Copyright ranges are now "2021-2022"
>     * 100-char width applied instead of 80
>     * Remove invalid dev_err_probe return
>     * Remove "spi" and "dev" elements from ocelot_ddata struct.
>     Since "dev" is available throughout, determine "ddata" and "spi" from
>     there instead of keeping separate references.
>     * Add header guard in drivers/mfd/ocelot.h
>     * Document ocelot_ddata struct
> 
> ---
>  MAINTAINERS               |   1 +
>  drivers/mfd/Kconfig       |  21 +++
>  drivers/mfd/Makefile      |   3 +
>  drivers/mfd/ocelot-core.c | 161 ++++++++++++++++++++
>  drivers/mfd/ocelot-spi.c  | 299 ++++++++++++++++++++++++++++++++++++++
>  drivers/mfd/ocelot.h      |  49 +++++++
>  6 files changed, 534 insertions(+)
>  create mode 100644 drivers/mfd/ocelot-core.c
>  create mode 100644 drivers/mfd/ocelot-spi.c
>  create mode 100644 drivers/mfd/ocelot.h

Applied, thanks.

-- 
Lee Jones [李琼斯]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel