Re: [PATCH 1/4] arm64: dts: ti: am64-main: Add CPSW DT node

[Lokesh Vutla <lokeshvutla@ti.com>]

On 04/03/21 12:51 am, Grygorii Strashko wrote:
> From: Vignesh Raghavendra <vigneshr@ti.com>
> 
> Add CPSW3g DT node with two external ports, MDIO and CPTS support. For
> CPSW3g DMA channels the ASEL is set to 15 (AM642x per DMA channel coherency
> feature), so that CPSW DMA channel participates in Coherency and thus avoid
> need to cache maintenance for SKBs. This improves bidirectional TCP
> performance by up to 100Mbps (on 1G link).
> 
> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>

nit pick. In $subject : k3-am64-main.

Thanks and regards,
Lokesh

> ---
>  arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 74 ++++++++++++++++++++++++
>  arch/arm64/boot/dts/ti/k3-am64.dtsi      |  2 +
>  2 files changed, 76 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> index 5f85950daef7..80443dbf272c 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> @@ -178,6 +178,12 @@
>  			compatible = "ti,am654-chipid";
>  			reg = <0x00000014 0x4>;
>  		};
> +
> +		phy_gmii_sel: phy@4044 {
> +			compatible = "ti,am654-phy-gmii-sel";
> +			reg = <0x4044 0x8>;
> +			#phy-cells = <1>;
> +		};
>  	};
>  
>  	main_uart0: serial@2800000 {
> @@ -402,4 +408,72 @@
>  		ti,otap-del-sel-ddr50 = <0x9>;
>  		ti,clkbuf-sel = <0x7>;
>  	};
> +
> +	cpsw3g: ethernet@8000000 {
> +		compatible = "ti,am642-cpsw-nuss";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		reg = <0x0 0x8000000 0x0 0x200000>;
> +		reg-names = "cpsw_nuss";
> +		ranges = <0x0 0x0 0x0 0x8000000 0x0 0x200000>;
> +		clocks = <&k3_clks 13 0>;
> +		assigned-clocks = <&k3_clks 13 1>;
> +		assigned-clock-parents = <&k3_clks 13 9>;
> +		clock-names = "fck";
> +		power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>;
> +
> +		dmas = <&main_pktdma 0xC500 15>,
> +		       <&main_pktdma 0xC501 15>,
> +		       <&main_pktdma 0xC502 15>,
> +		       <&main_pktdma 0xC503 15>,
> +		       <&main_pktdma 0xC504 15>,
> +		       <&main_pktdma 0xC505 15>,
> +		       <&main_pktdma 0xC506 15>,
> +		       <&main_pktdma 0xC507 15>,
> +		       <&main_pktdma 0x4500 15>;
> +		dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6",
> +			    "tx7", "rx";
> +
> +		ethernet-ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			cpsw_port1: port@1 {
> +				reg = <1>;
> +				ti,mac-only;
> +				label = "port1";
> +				phys = <&phy_gmii_sel 1>;
> +				mac-address = [00 00 de ad be ef];
> +			};
> +
> +			cpsw_port2: port@2 {
> +				reg = <2>;
> +				ti,mac-only;
> +				label = "port2";
> +				phys = <&phy_gmii_sel 2>;
> +				mac-address = [00 01 de ad be ef];
> +			};
> +		};
> +
> +		cpsw3g_mdio: mdio@f00 {
> +			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
> +			reg = <0x0 0xf00 0x0 0x100>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			clocks = <&k3_clks 13 0>;
> +			clock-names = "fck";
> +			bus_freq = <1000000>;
> +		};
> +
> +		cpts@3d000 {
> +			compatible = "ti,j721e-cpts";
> +			reg = <0x0 0x3d000 0x0 0x400>;
> +			clocks = <&k3_clks 13 1>;
> +			clock-names = "cpts";
> +			interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "cpts";
> +			ti,cpts-ext-ts-inputs = <4>;
> +			ti,cpts-periodic-outputs = <2>;
> +		};
> +	};
>  };
> diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi
> index 0ae8c844c482..de6805b0c72c 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi
> @@ -28,6 +28,8 @@
>  		serial6 = &main_uart4;
>  		serial7 = &main_uart5;
>  		serial8 = &main_uart6;
> +		ethernet0 = &cpsw_port1;
> +		ethernet1 = &cpsw_port2;
>  	};
>  
>  	chosen { };
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel