From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 797B5C7618A for ; Mon, 20 Mar 2023 17:39:09 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:Content-Type: Content-Transfer-Encoding:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:In-Reply-To:From:References:CC:To:Subject: MIME-Version:Date:Message-ID:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=L/uBbBWc5y7ocC3HCXm/aKohcO6WTMUlA/Tu0zQpo/Q=; b=c+epZFCRoyYtLb /bGERS34Y4Jy7QofllQ1f50i5BIq60xVQGAqNXDDOJe0fPppkKB0FR2+4RNv9P2YM5HLCJsQr50bO 6/QzjM5LsVCPIq5rlQqnjWbXqpmNAwl0S5XAnvvvSuepD57hZh2/mamhybe3t4Wq7LTosGsCH7L6J L5VG8bjZqkR8ML4df2/YxMXHOSrcD/VVMAmbMPLFcPaac76VM9SHuhah6t8QxaVYjBqX7v780N7si H0l4TZT3zveM7l1eKzVojIHUt15yEirNZO0Y90NkKz8ntW3mhjv2hKjFvnEsJ694UEF/Pp1Ok3kHb QdeIAI//qMEIe172NCpA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1peJSP-00A0A3-1p; Mon, 20 Mar 2023 17:38:05 +0000 Received: from mx08-00178001.pphosted.com ([91.207.212.93] helo=mx07-00178001.pphosted.com) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1peJSL-00A097-0U for linux-arm-kernel@lists.infradead.org; Mon, 20 Mar 2023 17:38:03 +0000 Received: from pps.filterd (m0046661.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 32KF0RNa019975; Mon, 20 Mar 2023 18:37:54 +0100 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=foss.st.com; h=message-id : date : mime-version : subject : to : cc : references : from : in-reply-to : content-type : content-transfer-encoding; s=selector1; bh=WMN8vT8Td1QlVJ4T/XWJ/pLHZuQeZQ1S2Du/K00/wiY=; b=OfGgDhX7rFpNoP8vxO6S0Rn34MxDO4hMojWkpZqVOQMQ4egXCk+QpA1ln6gUn7Jhfo+e A2Hpcj059IH+7e3aHVu1dGOJNLRrrfqgylUorR7NJXRY4JXvxFvLORaJ78zrWVEWOASM BuCK9SjMc/U3CpY7MTqL1z43+CK7zisAnXPyRnTzH7mT2uMhvIGv/Wdbmg4ohlMLHySf jeyMIxM6AMz2ZxHeBLJnE9Qn8Q7eAr3zxToLIQajDg6alCnJI9/HaryLEYxDMooVCi/E vC6AdX1svMeL6zZkKSstGvgqqJA2rLS8WgHXC4VEckeukP2NA1i+E6uwUF66+OnXzkPv Mg== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com (PPS) with ESMTPS id 3pekqx3rbb-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 20 Mar 2023 18:37:53 +0100 Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 52E77100034; Mon, 20 Mar 2023 18:37:53 +0100 (CET) Received: from Webmail-eu.st.com (shfdag1node1.st.com [10.75.129.69]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 4C10521A23E; Mon, 20 Mar 2023 18:37:53 +0100 (CET) Received: from [10.201.21.93] (10.201.21.93) by SHFDAG1NODE1.st.com (10.75.129.69) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.17; Mon, 20 Mar 2023 18:37:52 +0100 Message-ID: Date: Mon, 20 Mar 2023 18:37:52 +0100 MIME-Version: 1.0 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101 Thunderbird/102.4.2 Subject: Re: [PATCH v5 09/10] ARM: dts: stm32: add STM32MP1-based Phytec SoM Content-Language: en-US To: Steffen Trumtrar , CC: Krzysztof Kozlowski , Maxime Coquelin , , References: <20230320132755.2150384-1-s.trumtrar@pengutronix.de> <20230320132755.2150384-10-s.trumtrar@pengutronix.de> From: Alexandre TORGUE In-Reply-To: <20230320132755.2150384-10-s.trumtrar@pengutronix.de> X-Originating-IP: [10.201.21.93] X-ClientProxiedBy: EQNCAS1NODE3.st.com (10.75.129.80) To SHFDAG1NODE1.st.com (10.75.129.69) X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.942,Hydra:6.0.573,FMLib:17.11.170.22 definitions=2023-03-20_15,2023-03-20_02,2023-02-09_01 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230320_103801_480494_C405771A X-CRM114-Status: GOOD ( 22.20 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="us-ascii"; Format="flowed" Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Hi Steffen On 3/20/23 14:27, Steffen Trumtrar wrote: > The Phytec STM32MP1 based SoMs feature up to 1 GB DDR3LP RAM, up to 1 GB > eMMC, up to 16 MB QSPI and up to 128 GB NAND flash. > > Signed-off-by: Steffen Trumtrar > --- > > Notes: > checkpatch warns about un-documented binding > > According to checkpatch the binding for "winbond,w25q128" > used in this dtsi is un-documented. > However, 'jedec,spi-nor.yaml' defines the pattern > > (winbond,)?w25q(16|32(w|dw)?|64(dw)?|80bl|128(fw)?|256))$" > > so, this should be good!? We recently added some yaml fixes and we continue to send others (i.e., GPU yaml error fix is under review) so please don't add new ones. Some of follownig errors are directly linked to your board so please fix them. Thanks Alex /local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dtb: codec@18: 'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: /local/home/frq08678/STLINUX/kernel/my-kernel/stm32/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dtb: /soc/i2c@40012000/touch@44: failed to match any schema with compatible: ['st,stmpe811'] arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dtb: /soc/i2c@40012000/touch@44/touchscreen: failed to match any schema with compatible: ['st,stmpe-ts'] arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dtb: /soc/i2c@40012000/leds@62: failed to match any schema with compatible: ['nxp,pca9533'] /local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dtb: sai@4400b000: audio-controller@4400b004:port:endpoint: Unevaluated properties are not allowed ('format' was unexpected) From schema: /local/home/frq08678/STLINUX/kernel/my-kernel/stm32/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml /local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dtb: sai@4400b000: audio-controller@4400b024:port:endpoint: Unevaluated properties are not allowed ('format' was unexpected) From schema: /local/home/frq08678/STLINUX/kernel/my-kernel/stm32/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml /local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dtb: usbphyc@5a006000: usb-phy@0: 'vbus-supply' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: /local/home/frq08678/STLINUX/kernel/my-kernel/stm32/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml /local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dtb: pmic@33: regulators: 'vref-ddr', 'vref_ddr-supply' do not match any of the regexes: '^(buck[1-4]|ldo[1-6]|boost|pwr_sw[1-2])-supply$', '^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$', '^buck[1-4]$', '^ldo[1-2,5-6]$', '^pwr_sw[1-2]$', 'pinctrl-[0-9]+' From schema: /local/home/frq08678/STLINUX/kernel/my-kernel/stm32/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml /local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dtb: gpu@59000000: 'contiguous-area' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: /local/home/frq08678/STLINUX/kernel/my-kernel/stm32/Documentation/devicetree/bindings/gpu/vivante,gc.yaml > > .../stm32mp157c-phycore-stm32mp15-som.dtsi | 609 ++++++++++++++++++ > 1 file changed, 609 insertions(+) > create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-som.dtsi > > diff --git a/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-som.dtsi b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-som.dtsi > new file mode 100644 > index 0000000000000..230863daca60b > --- /dev/null > +++ b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-som.dtsi > @@ -0,0 +1,609 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > +/* > + * Copyright (C) 2022-2023 Steffen Trumtrar > + * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved > + * Author: Dom VOVARD . > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include "stm32mp15-pinctrl.dtsi" > + > +/ { > + model = "PHYTEC phyCORE-STM32MP15 SOM"; > + compatible = "phytec,phycore-stm32mp157c-som", "st,stm32mp157"; > + > + aliases { > + ethernet0 = ðernet0; > + rtc0 = &i2c4_rtc; > + rtc1 = &rtc; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + key-home { > + label = "Home"; > + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; > + linux,code = ; > + }; > + > + key-enter { > + label = "Enter"; > + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; > + linux,code = ; > + }; > + }; > + > + reserved-memory { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + retram: retram@38000000 { > + compatible = "shared-dma-pool"; > + reg = <0x38000000 0x10000>; > + no-map; > + }; > + > + mcuram: mcuram@30000000 { > + compatible = "shared-dma-pool"; > + reg = <0x30000000 0x40000>; > + no-map; > + }; > + > + mcuram2: mcuram2@10000000 { > + compatible = "shared-dma-pool"; > + reg = <0x10000000 0x40000>; > + no-map; > + }; > + > + vdev0vring0: vdev0vring0@10040000 { > + compatible = "shared-dma-pool"; > + reg = <0x10040000 0x1000>; > + no-map; > + }; > + > + vdev0vring1: vdev0vring1@10041000 { > + compatible = "shared-dma-pool"; > + reg = <0x10041000 0x1000>; > + no-map; > + }; > + > + vdev0buffer: vdev0buffer@10042000 { > + compatible = "shared-dma-pool"; > + reg = <0x10042000 0x4000>; > + no-map; > + }; > + > + gpu_reserved: gpu@f8000000 { > + reg = <0xf8000000 0x8000000>; > + no-map; > + }; > + }; > + > + sound { > + compatible = "audio-graph-card"; > + label = "STM32MP1-PHYCORE"; > + routing = > + "Playback", "MCLK", /* Set a route between "MCLK" and "playback" widgets */ > + "Capture", "MCLK"; > + dais = <&sai2b_port>, > + <&sai2a_port>; > + }; > + > + regulator_vin: regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vin"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + }; > +}; > + > +ðernet0 { > + pinctrl-0 = <ðernet0_rgmii_pins_d>; > + pinctrl-1 = <ðernet0_rgmii_sleep_pins_d>; > + pinctrl-names = "default", "sleep"; > + phy-mode = "rgmii-id"; > + max-speed = <1000>; > + phy-handle = <&phy0>; > + st,eth-clk-sel; > + clock-names = "stmmaceth", > + "mac-clk-tx", > + "mac-clk-rx", > + "eth-ck", > + "syscfg-clk", > + "ethstp"; > + clocks = <&rcc ETHMAC>, > + <&rcc ETHTX>, > + <&rcc ETHRX>, > + <&rcc ETHCK_K>, > + <&rcc SYSCFG>, > + <&rcc ETHSTP>; > + status = "okay"; > + > + mdio0 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "snps,dwmac-mdio"; > + > + phy0: ethernet-phy@1 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <1>; > + interrupt-parent = <&gpiog>; > + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; > + ti,rx-internal-delay = ; > + ti,tx-internal-delay = ; > + ti,fifo-depth = ; > + ti,min-output-impedance; > + enet-phy-lane-no-swap; > + ti,clk-output-sel = ; > + }; > + }; > +}; > + > +&gpu { > + contiguous-area = <&gpu_reserved>; > +}; > + > +&i2c1 { > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&i2c1_pins_b>; > + pinctrl-1 = <&i2c1_sleep_pins_b>; > + i2c-scl-rising-time-ns = <100>; > + i2c-scl-falling-time-ns = <7>; > + status = "okay"; > + > + codec@18 { > + compatible = "ti,tlv320aic3007"; > + reg = <0x18>; > + #sound-dai-cells = <0>; > + > + ai3x-micbias-vg = <2>; > + > + AVDD-supply = <&v3v3>; > + IOVDD-supply = <&v3v3>; > + DRVDD-supply = <&v3v3>; > + DVDD-supply = <&v1v8_audio>; > + > + clocks = <&sai2b>; > + clock-names = "MCLK"; > + > + port { > + #address-cells = <1>; > + #size-cells = <0>; > + > + tlv320_tx_endpoint: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&sai2b_endpoint>; > + frame-master; > + bitclock-master; > + }; > + > + tlv320_rx_endpoint: endpoint@1 { > + reg = <1>; > + remote-endpoint = <&sai2a_endpoint>; > + frame-master; > + bitclock-master; > + }; > + }; > + }; > + > + touch@44 { > + compatible = "st,stmpe811"; > + reg = <0x44>; > + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; > + interrupt-parent = <&gpioi>; > + vio-supply = <&v3v3>; > + vcc-supply = <&v3v3>; > + > + touchscreen { > + compatible = "st,stmpe-ts"; > + st,sample-time = <4>; > + st,mod-12b = <1>; > + st,ref-sel = <0>; > + st,adc-freq = <1>; > + st,ave-ctrl = <1>; > + st,touch-det-delay = <2>; > + st,settling = <2>; > + st,fraction-z = <7>; > + st,i-drive = <1>; > + }; > + }; > + > + leds@62 { > + compatible = "nxp,pca9533"; > + reg = <0x62>; > + > + led-0 { > + color = ; > + function = LED_FUNCTION_POWER; > + type = ; > + }; > + > + led-1 { > + color = ; > + function = LED_FUNCTION_POWER; > + type = ; > + }; > + > + led-2 { > + color = ; > + function = LED_FUNCTION_HEARTBEAT; > + type = ; > + linux,default-trigger = "heartbeat"; > + }; > + }; > +}; > + > +&i2c4 { > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&i2c4_pins_a>; > + pinctrl-1 = <&i2c4_sleep_pins_a>; > + i2c-scl-rising-time-ns = <185>; > + i2c-scl-falling-time-ns = <20>; > + status = "okay"; > + > + pmic@33 { > + compatible = "st,stpmic1"; > + reg = <0x33>; > + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + regulators { > + compatible = "st,stpmic1-regulators"; > + buck1-supply = <®ulator_vin>; > + buck2-supply = <®ulator_vin>; > + buck3-supply = <®ulator_vin>; > + buck4-supply = <®ulator_vin>; > + ldo1-supply = <&v3v3>; > + ldo2-supply = <&v3v3>; > + ldo3-supply = <&vdd_ddr>; > + ldo4-supply = <®ulator_vin>; > + ldo5-supply = <&v3v3>; > + ldo6-supply = <&v3v3>; > + vref_ddr-supply = <®ulator_vin>; > + boost-supply = <®ulator_vin>; > + pwr_sw1-supply = <&bst_out>; > + pwr_sw2-supply = <&bst_out>; > + > + vddcore: buck1 { > + regulator-name = "vddcore"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1350000>; > + regulator-always-on; > + regulator-initial-mode = <0>; > + regulator-over-current-protection; > + }; > + > + vdd_ddr: buck2 { > + regulator-name = "vdd_ddr"; > + regulator-min-microvolt = <1350000>; > + regulator-max-microvolt = <1350000>; > + regulator-always-on; > + regulator-initial-mode = <0>; > + regulator-over-current-protection; > + }; > + > + vdd: buck3 { > + regulator-name = "vdd"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + st,mask-reset; > + regulator-initial-mode = <0>; > + regulator-over-current-protection; > + }; > + > + v3v3: buck4 { > + regulator-name = "v3v3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + regulator-over-current-protection; > + regulator-initial-mode = <0>; > + }; > + > + v1v8_audio: ldo1 { > + regulator-name = "v1v8_audio"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + interrupts = ; > + > + }; > + > + vdd_eth_2v5: ldo2 { > + regulator-name = "dd_eth_2v5"; > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <2500000>; > + regulator-always-on; > + interrupts = ; > + > + }; > + > + vtt_ddr: ldo3 { > + regulator-name = "vtt_ddr"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <750000>; > + regulator-always-on; > + regulator-over-current-protection; > + }; > + > + vdd_usb: ldo4 { > + regulator-name = "vdd_usb"; > + interrupts = ; > + }; > + > + vdda: ldo5 { > + regulator-name = "vdda"; > + regulator-min-microvolt = <2900000>; > + regulator-max-microvolt = <2900000>; > + interrupts = ; > + regulator-boot-on; > + }; > + > + vdd_eth_1v0: ldo6 { > + regulator-name = "vdd_eth_1v0"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + interrupts = ; > + > + }; > + > + vref_ddr: vref-ddr { > + regulator-name = "vref_ddr"; > + regulator-always-on; > + regulator-over-current-protection; > + }; > + > + bst_out: boost { > + regulator-name = "bst_out"; > + interrupts = ; > + }; > + > + vbus_otg: pwr_sw1 { > + regulator-name = "vbus_otg"; > + interrupts = ; > + regulator-active-discharge = <1>; > + }; > + > + vbus_sw: pwr_sw2 { > + regulator-name = "vbus_sw"; > + interrupts = ; > + regulator-active-discharge = <1>; > + }; > + }; > + > + onkey { > + compatible = "st,stpmic1-onkey"; > + interrupts = , > + ; > + interrupt-names = "onkey-falling", > + "onkey-rising"; > + power-off-time-sec = <10>; > + }; > + > + watchdog { > + compatible = "st,stpmic1-wdt"; > + }; > + }; > + > + i2c4_eeprom: eeprom@50 { > + compatible = "microchip,24c32", > + "atmel,24c32"; > + reg = <0x50>; > + }; > + > + i2c4_rtc: rtc@52 { > + compatible = "microcrystal,rv3028"; > + reg = <0x52>; > + }; > +}; > + > +&ipcc { > + status = "okay"; > +}; > + > +&iwdg2 { > + timeout-sec = <32>; > + status = "okay"; > +}; > + > +&m_can2 { > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&m_can2_pins_a>; > + pinctrl-1 = <&m_can2_sleep_pins_a>; > + status = "okay"; > +}; > + > +&m4_rproc { > + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, > + <&vdev0vring1>, <&vdev0buffer>; > + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>; > + mbox-names = "vq0", "vq1", "shutdown", "detach"; > + interrupt-parent = <&exti>; > + interrupts = <68 1>; > + status = "okay"; > +}; > + > +&pwr_regulators { > + vdd-supply = <&vdd>; > + vdd_3v3_usbfs-supply = <&vdd_usb>; > +}; > + > +&qspi { > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; > + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; > + status = "okay"; > + > + flash0: flash@0 { > + compatible = "winbond,w25q128", "jedec,spi-nor"; > + reg = <0>; > + spi-rx-bus-width = <4>; > + spi-max-frequency = <50000000>; > + m25p,fast-read; > + #address-cells = <1>; > + #size-cells = <1>; > + }; > +}; > + > +&rng1 { > + status = "okay"; > +}; > + > +&rtc { > + status = "okay"; > +}; > + > +&sai2 { > + clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; > + clock-names = "pclk", "x8k", "x11k"; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&sai2a_pins_b>, <&sai2b_pins_d>; > + pinctrl-1 = <&sai2a_sleep_pins_b>, <&sai2b_sleep_pins_d>; > + status = "okay"; > +}; > + > +&sai2a { > + dma-names = "rx"; > + st,sync = <&sai2b 2>; > + clocks = <&rcc SAI2_K>, <&sai2b>; > + clock-names = "sai_ck", "MCLK"; > + #clock-cells = <0>; > + > + sai2a_port: port { > + sai2a_endpoint: endpoint { > + remote-endpoint = <&tlv320_rx_endpoint>; > + format = "i2s"; > + mclk-fs = <256>; > + dai-tdm-slot-num = <2>; > + dai-tdm-slot-width = <16>; > + }; > + }; > +}; > + > +&sai2b { > + dma-names = "tx"; > + #clock-cells = <0>; > + > + sai2b_port: port { > + sai2b_endpoint: endpoint { > + remote-endpoint = <&tlv320_tx_endpoint>; > + format = "i2s"; > + mclk-fs = <256>; > + dai-tdm-slot-num = <2>; > + dai-tdm-slot-width = <16>; > + }; > + }; > +}; > + > +&sdmmc1 { > + pinctrl-names = "default", "opendrain", "sleep"; > + pinctrl-0 = <&sdmmc1_b4_pins_b>; > + pinctrl-1 = <&sdmmc1_b4_od_pins_b>; > + pinctrl-2 = <&sdmmc1_b4_sleep_pins_b>; > + cd-gpios = <&gpiof 3 GPIO_ACTIVE_LOW>; > + disable-wp; > + st,neg-edge; > + bus-width = <4>; > + vmmc-supply = <&v3v3>; > + status = "okay"; > +}; > + > +&sdmmc2 { > + pinctrl-names = "default", "opendrain", "sleep"; > + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_e>; > + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_e>; > + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_e>; > + non-removable; > + no-sd; > + no-sdio; > + st,neg-edge; > + bus-width = <8>; > + vmmc-supply = <&v3v3>; > + vqmmc-supply = <&v3v3>; > + mmc-ddr-3_3v; > +}; > + > +&spi1 { > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&spi1_pins_a>; > + pinctrl-1 = <&spi1_sleep_pins_a>; > + cs-gpios = <&gpioz 3 0>; > + status = "okay"; > +}; > + > +&uart4 { > + pinctrl-names = "default", "sleep", "idle"; > + pinctrl-0 = <&uart4_pins_a>; > + pinctrl-1 = <&uart4_sleep_pins_a>; > + pinctrl-2 = <&uart4_idle_pins_a>; > + pinctrl-3 = <&uart4_pins_a>; > + /delete-property/dmas; > + /delete-property/dma-names; > + status = "okay"; > +}; > + > +&usart1 { > + pinctrl-names = "default", "sleep", "idle"; > + pinctrl-0 = <&usart1_pins_b &usart1_pins_a>; > + pinctrl-1 = <&usart1_sleep_pins_b &usart1_sleep_pins_a>; > + pinctrl-2 = <&usart1_idle_pins_b &usart1_idle_pins_a>; > + uart-has-rtscts; > + status = "okay"; > +}; > + > +&usart3 { > + pinctrl-names = "default", "sleep", "idle"; > + pinctrl-0 = <&usart3_pins_a>; > + pinctrl-1 = <&usart3_sleep_pins_a>; > + pinctrl-2 = <&usart3_idle_pins_a>; > + status = "okay"; > +}; > + > +&usbh_ehci { > + phys = <&usbphyc_port0>; > + phy-names = "usb"; > + status = "okay"; > +}; > + > +&usbh_ohci { > + phys = <&usbphyc_port0>; > + phy-names = "usb"; > + status = "okay"; > +}; > + > +&usbotg_hs { > + phys = <&usbphyc_port1 0>; > + phy-names = "usb2-phy"; > + vbus-supply = <&vbus_otg>; > + status = "okay"; > +}; > + > +&usbphyc { > + status = "okay"; > +}; > + > +&usbphyc_port0 { > + phy-supply = <&vdd_usb>; > + vbus-supply = <&vbus_sw>; > +}; > + > +&usbphyc_port1 { > + phy-supply = <&vdd_usb>; > +}; _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel