Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v5 1/3] arm64: dts: Add a device tree for the Librem 5 phone
@ 2020-07-31  8:27 Martin Kepplinger
  2020-07-31  8:27 ` [PATCH v5 2/3] MAINTAINERS: Add Purism Librem 5 section to the list Martin Kepplinger
                   ` (3 more replies)
  0 siblings, 4 replies; 7+ messages in thread
From: Martin Kepplinger @ 2020-07-31  8:27 UTC (permalink / raw)
  To: robh, kernel, shawnguo, s.hauer, kernel, festevam, linux-imx,
	mchehab, Anson.Huang, agx, angus, broonie
  Cc: devicetree, Daniel Baluta, linux-kernel, linux-arm-kernel,
	Martin Kepplinger

From: "Angus Ainslie (Purism)" <angus@akkea.ca>

Add a devicetree description for the Librem 5 phone. 4 hardware revisions
have been available. Some revisions include changes that need different
software to be run. So far, r3 ("Dogwood") is one such example, see:

	"Aspen"		r0	not supported (very few devices exist)
	"Birch"		r1	supported by r2
	"Chestnut"	r2	added by this patch
	"Dogwood"	r3	added by this patch
	"Evergreen"	r4	tba / most likely supported by r3

See https://puri.sm/products/librem-5/ for more information.

This boots to a working console with working WWAN modem, wifi usdhc,
IMU sensor device, proximity sensor, haptic motor, gpio keys, GNSS and LEDs.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
For audio related part:
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
---


revision history
----------------
v5:
thanks a lot Pavel for reviewing again
 * remove pwmleds (no stable interface yet)

v4:
thanks a lot Shawn for reviewing
 * rename to dtsi and split out r2 and r3 dts with revision specifics
 * add the USB2642 hard-wired Hub
 * fix charge controller boost-max-current
 * disable pullup on CHRG_INT (not needed due to external one)
 * add documentation for the boards' compatible strings
 * fix led-backlight propery usage
 * coding style fixes
https://lore.kernel.org/linux-devicetree/20200721153225.7593-1-martin.kepplinger@puri.sm/T/

v3:
thanks a lot Mark for reviewing! changes since v2:
 * nicer audio cards names
 * squash unneeded audio_pwr regulator
 * remove the susphy_quirk from dwc3_1 after more testing
 * add usdhc2 card detect via gpio
 * add headphone detect for audio card
https://lore.kernel.org/linux-arm-kernel/20200617073821.16737-1-martin.kepplinger@puri.sm/T/

v2:
thanks a lot Marco, Daniel and Pavel for reviewing. changes since v1:
 * alphabetical sortings / more consistent node names
 * remove unused regulator and pinctrl descriptions
 * generic labels for leds, backlight, flash and torch
 * audio clk settings moved to sai2 node
https://lore.kernel.org/linux-arm-kernel/20200604084756.586-1-martin.kepplinger@puri.sm/T/

v1:
https://lore.kernel.org/linux-arm-kernel/20200514155737.12160-1-martin.kepplinger@puri.sm/



 arch/arm64/boot/dts/freescale/Makefile        |    2 +
 .../boot/dts/freescale/imx8mq-librem5-r2.dts  |   25 +
 .../boot/dts/freescale/imx8mq-librem5-r3.dts  |   23 +
 .../boot/dts/freescale/imx8mq-librem5.dtsi    | 1124 +++++++++++++++++
 4 files changed, 1174 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index a39f0a1723e0..97335205b600 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -35,6 +35,8 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-phanbell.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts
new file mode 100644
index 000000000000..17f2dc5c47aa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Purism SPC <kernel@puri.sm>
+//
+// Librem 5 Chestnut
+
+/dts-v1/;
+
+#include "imx8mq-librem5.dtsi"
+
+/ {
+	model = "Purism Librem 5r2";
+	compatible = "purism,librem5r2", "purism,librem5", "fsl,imx8mq";
+};
+
+&bq25895 {
+	ti,battery-regulation-voltage = <4192000>; /* uV */
+	ti,charge-current = <1600000>; /* uA */
+	ti,termination-current = <66000>;  /* uA */
+};
+
+&accel_gyro {
+	mount-matrix =  "1",  "0",  "0",
+			"0", "-1",  "0",
+			"0",  "0",  "1";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
new file mode 100644
index 000000000000..22760b4789c9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Purism SPC <kernel@puri.sm>
+
+/dts-v1/;
+
+#include "imx8mq-librem5.dtsi"
+
+/ {
+	model = "Purism Librem 5r3";
+	compatible = "purism,librem5r3", "purism,librem5", "fsl,imx8mq";
+};
+
+&bq25895 {
+	ti,battery-regulation-voltage = <4200000>; /* uV */
+	ti,charge-current = <1500000>; /* uA */
+	ti,termination-current = <144000>;  /* uA */
+};
+
+&accel_gyro {
+	mount-matrix =  "1",  "0",  "0",
+			"0",  "1",  "0",
+			"0",  "0", "-1";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
new file mode 100644
index 000000000000..eb94a45615f3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -0,0 +1,1124 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2020 Purism SPC
+ */
+
+/dts-v1/;
+
+#include "dt-bindings/input/input.h"
+#include "dt-bindings/pwm/pwm.h"
+#include "dt-bindings/usb/pd.h"
+#include "imx8mq.dtsi"
+
+/ {
+	model = "Purism Librem 5";
+	compatible = "purism,librem5", "fsl,imx8mq";
+
+	backlight_dsi: backlight-dsi {
+		compatible = "led-backlight";
+		leds = <&led_backlight>;
+	};
+
+	pmic_osc: clock-pmic {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic_osc";
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_keys>;
+
+		vol-down {
+			label = "VOL_DOWN";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		vol-up {
+			label = "VOL_UP";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	reg_aud_1v8: regulator-audio-1v8 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_audiopwr>;
+		regulator-name = "AUDIO_PWR_EN";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_gnss: regulator-gnss {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gnsspwr>;
+		regulator-name = "GNSS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_hub: regulator-hub {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hub_pwr>;
+		regulator-name = "HUB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd_3v4: regulator-lcd-3v4 {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD_3V4";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dsibiasen>;
+		vin-supply = <&reg_vsys_3v4>;
+		gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vdd_sen: regulator-vdd-sen {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_SEN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vdd_3v3: regulator-vdd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vdd_1v8: regulator-vdd-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vsys_3v4: regulator-vsys-3v4 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSYS_3V4";
+		regulator-min-microvolt = <3400000>;
+		regulator-max-microvolt = <3400000>;
+		regulator-always-on;
+	};
+
+	reg_wifi_3v3: regulator-wifi-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_WIFI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		pinctrl-0 = <&pinctrl_hp>;
+		simple-audio-card,name = "Librem 5";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Headphone", "Headphones",
+			"Microphone", "Headset Mic",
+			"Microphone", "Digital Mic",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"Headphones", "HPOUTL",
+			"Headphones", "HPOUTR",
+			"Speaker", "SPKOUTL",
+			"Speaker", "SPKOUTR",
+			"Headset Mic", "MICBIAS",
+			"IN3R", "Headset Mic",
+			"DMICDAT", "Digital Mic";
+		simple-audio-card,hp-det-gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+
+	sound-wwan {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Modem";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai6>;
+			frame-inversion;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&bm818_codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+
+	bm818_codec: sound-wwan-codec {
+		compatible = "broadmobi,bm818", "option,gtm601";
+		#sound-dai-cells = <0>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm1 0 1000000000 0>;
+		pwm-names = "enable";
+		vcc-supply = <&reg_vdd_3v3>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: ddrc-opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-800M {
+			opp-hz = /bits/ 64 <800000000>;
+		};
+	};
+};
+
+&dphy {
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	nor_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pmic_5v>;
+
+	pmic-5v {
+		gpio-hog;
+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		input;
+	};
+};
+
+&iomuxc {
+	pinctrl_audiopwr: audiopwrgrp {
+		fsl,pins = <
+			/* AUDIO_POWER_EN_3V3 */
+			MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4	0x83
+		>;
+	};
+
+	pinctrl_bl: blgrp {
+		fsl,pins = <
+			/* BACKLINGE_EN */
+			MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14	0x83
+		>;
+	};
+
+	pinctrl_charger_in: chargeringrp {
+		fsl,pins = <
+			/* CHRG_INT */
+			MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3	0x00
+			/* CHG_STATUS_B */
+			MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0		0x80
+		>;
+	};
+
+	pinctrl_dsibiasen: dsibiasengrp {
+		fsl,pins = <
+			/* DSI_BIAS_EN */
+			MX8MQ_IOMUXC_ENET_TD1_GPIO1_IO20	0x83
+		>;
+	};
+
+	pinctrl_dsien: dsiengrp {
+		fsl,pins = <
+			/* DSI_EN_3V3 */
+			MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x83
+		>;
+	};
+
+	pinctrl_ecspi1: spi1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x83
+			MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x83
+			MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x19
+			MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x83
+		>;
+	};
+
+	pinctrl_gauge: gaugegrp {
+		fsl,pins = <
+			/* BAT_LOW */
+			MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20	0x80
+		>;
+	};
+
+	pinctrl_gnsspwr: gnsspwrgrp {
+		fsl,pins = <
+			/* GPS3V3_EN */
+			MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12	0x83
+		>;
+	};
+
+	pinctrl_haptic: hapticgrp {
+		fsl,pins = <
+			/* MOTO */
+			MX8MQ_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT	0x83
+		>;
+	};
+
+	pinctrl_hp: hpgrp {
+		fsl,pins = <
+			/* HEADPHONE_DET_1V8 */
+			MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9	0x180
+		>;
+	};
+
+	pinctrl_hub_pwr: hubpwrgrp {
+		fsl,pins = <
+			/* HUB_PWR_3V3_EN */
+			MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x83
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL		0x40000026
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA		0x40000026
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL		0x40000026
+			MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA		0x40000026
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL		0x40000026
+			MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA		0x40000026
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL		0x40000026
+			MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA		0x40000026
+		>;
+	};
+
+	pinctrl_keys: keysgrp {
+		fsl,pins = <
+			/* VOL- */
+			MX8MQ_IOMUXC_ENET_MDIO_GPIO1_IO17	0x01C0
+			/* VOL+ */
+			MX8MQ_IOMUXC_ENET_MDC_GPIO1_IO16	0x01C0
+		>;
+	};
+
+	pinctrl_led_b: ledbgrp {
+		fsl,pins = <
+			/* LED_B */
+			MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT	0x06
+		>;
+	};
+
+	pinctrl_led_g: ledggrp {
+		fsl,pins = <
+			/* LED_G */
+			MX8MQ_IOMUXC_SAI3_MCLK_PWM4_OUT		0x06
+		>;
+	};
+
+	pinctrl_led_r: ledrgrp {
+		fsl,pins = <
+			/* LED_R */
+			MX8MQ_IOMUXC_SPDIF_TX_PWM3_OUT		0x06
+		>;
+	};
+
+	pinctrl_mag: maggrp {
+		fsl,pins = <
+			/* INT_MAG */
+			MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22	0x80
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			/* PMIC_NINT */
+			MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x80
+		>;
+	};
+
+	pinctrl_pmic_5v: pmic5vgrp {
+		fsl,pins = <
+			/* PMIC_5V */
+			MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x80
+		>;
+	};
+
+	pinctrl_prox: proxgrp {
+		fsl,pins = <
+			/* INT_LIGHT */
+			MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7	0x80
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			/* RTC_INT */
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x80
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC	0xd6
+			MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK	0xd6
+			MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK	0xd6
+		>;
+	};
+
+	pinctrl_sai6: sai6grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC	0xd6
+			MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK	0xd6
+			MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0	0xd6
+		>;
+	};
+
+	pinctrl_tcpc: tcpcgrp {
+		fsl,pins = <
+			/* TCPC_INT */
+			MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x01C0
+		>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			/* TYPEC_MUX_EN */
+			MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11	0x83
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX	0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX	0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX	0x49
+			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX	0x49
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX	0x49
+			MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX	0x49
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX		0x49
+			MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX		0x49
+			MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B	0x49
+			MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B		0x49
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xcd
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xcd
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xcd
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xcd
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x8d
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xdf
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xdf
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xdf
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xdf
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x9f
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x80
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0	0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1	0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2	0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3	0xc3
+			MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x80
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x8d
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xcd
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0	0xcd
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1	0xcd
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2	0xcd
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3	0xcd
+			MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x80
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x9f
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xcf
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0	0xcf
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1	0xcf
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2	0xcf
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3	0xcf
+			MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			/* nWDOG */
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x1f
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <387000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	typec_pd: usb-pd@3f {
+		compatible = "ti,tps6598x";
+		reg = <0x3f>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>, <&pinctrl_tcpc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+		connector {
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_con_hs: endpoint {
+						remote-endpoint = <&typec_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_con_ss: endpoint {
+						remote-endpoint = <&typec_ss>;
+					};
+				};
+			};
+		};
+	};
+
+	pmic: pmic@4b {
+		compatible = "rohm,bd71837";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		clocks = <&pmic_osc>;
+		clock-names = "osc";
+		clock-output-names = "pmic_clk";
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 GPIO_ACTIVE_LOW>;
+		interrupt-names = "irq";
+		rohm,reset-snvs-powered;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <900000>;
+				rohm,dvs-idle-voltage = <850000>;
+				rohm,dvs-suspend-voltage = <800000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "BUCK3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				rohm,dvs-run-voltage = <900000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				rohm,dvs-run-voltage = <1000000>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "BUCK7";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "BUCK8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				/* leave on for snvs power button */
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				/* leave on for snvs power button */
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				/* VDD_PHY_0V9 - MIPI and HDMI domains */
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				/* VDD_PHY_0V9 - MIPI, HDMI and USB domains */
+				regulator-name = "LDO6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				/* VDD_PHY_3V3 - USB domain */
+				regulator-name = "LDO7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	rtc@68 {
+		compatible = "microcrystal,rv4162";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <387000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	magnetometer@1e	{
+		compatible = "st,lsm9ds1-magn";
+		reg = <0x1e>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mag>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+		vdd-supply = <&reg_vdd_sen>;
+		vddio-supply = <&reg_vdd_1v8>;
+	};
+
+	regulator@3e {
+		compatible = "tps65132";
+		reg = <0x3e>;
+
+		outp {
+			regulator-name = "LCD_AVDD";
+			vin-supply = <&reg_lcd_3v4>;
+		};
+
+		outn {
+			regulator-name = "LCD_AVEE";
+			vin-supply = <&reg_lcd_3v4>;
+		};
+	};
+
+	flash@53 {
+		compatible = "lm3560";
+		reg = <0x53>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		flash@0 {
+			reg = <0x0>;
+			flash-timeout-us = <150000>;
+			flash-max-microamp = <320000>;
+			led-max-microamp = <60000>;
+			label = "flash";
+		};
+
+		torch@1 {
+			reg = <0x1>;
+			led-max-microamp = <10000>;
+			label = "torch";
+		};
+
+	};
+
+	prox@60 {
+		compatible = "vishay,vcnl4040";
+		reg = <0x60>;
+		pinctrl-0 = <&pinctrl_prox>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	accel_gyro: accel-gyro@6a	{
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		vdd-supply = <&reg_vdd_sen>;
+		vddio-supply = <&reg_vdd_1v8>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <387000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	codec: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>; // 0x4a is the test address
+		clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+		assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+		assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+		assigned-clock-rates = <24576000>;
+		#sound-dai-cells = <0>;
+		mic-cfg = <0x200>;
+		DCVDD-supply = <&reg_aud_1v8>;
+		DBVDD-supply = <&reg_aud_1v8>;
+		AVDD-supply = <&reg_aud_1v8>;
+		CPVDD-supply = <&reg_aud_1v8>;
+		MICVDD-supply = <&reg_aud_1v8>;
+		PLLVDD-supply = <&reg_aud_1v8>;
+		SPKVDD1-supply = <&reg_vsys_3v4>;
+		SPKVDD2-supply = <&reg_vsys_3v4>;
+		gpio-cfg = <
+			0x0000 /* n/c */
+			0x0001 /* gpio2, 1: default */
+			0x0013 /* gpio3, 2: dmicclk */
+			0x0000 /* n/c, 3: default */
+			0x8014 /* gpio5, 4: dmic_dat */
+			0x0000 /* gpio6, 5: default */
+		>;
+	};
+
+	backlight@36 {
+		compatible = "ti,lm36922";
+		reg = <0x36>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bl>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+		vled-supply = <&reg_vsys_3v4>;
+		ti,ovp-microvolt = <25000000>;
+
+		led_backlight: led@0 {
+			reg = <0>;
+			label = ":backlight";
+			linux,default-trigger = "backlight";
+			led-max-microamp = <20000>;
+		};
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5506";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1440>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <387000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	bat: fuel-gauge@36 {
+		compatible = "maxim,max17055";
+		reg = <0x36>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gauge>;
+		maxim,over-heat-temp = <700>;
+		maxim,over-volt = <4500>;
+		maxim,rsns-microohm = <5000>;
+	};
+
+	bq25895: charger@6a {
+		compatible = "ti,bq25895", "ti,bq25890";
+		reg = <0x6a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_charger_in>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		phys = <&usb3_phy0>;
+		ti,precharge-current = <130000>; /* uA */
+		ti,minimum-sys-voltage = <3700000>; /* uV */
+		ti,boost-voltage = <5000000>; /* uV */
+		ti,boost-max-current = <500000>; /* uA */
+		ti,use-vinmin-threshold = <1>; /* enable VINDPM */
+		ti,vinmin-threshold = <3900000>; /* uV */
+		monitored-battery = <&bat>;
+	};
+};
+
+&pgc_gpu {
+	power-supply = <&buck3_reg>;
+};
+
+&pgc_mipi {
+	power-supply = <&ldo5_reg>;
+};
+
+&pgc_vpu {
+	power-supply = <&buck4_reg>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_haptic>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_led_b>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_led_g>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_led_r>;
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>;
+	assigned-clock-rates = <786432000>, <722534400>;
+	status = "okay";
+};
+
+&sai6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai6>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI6>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-synchronous-rx;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&uart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 { /* TPS - GPS - DEBUG */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+
+	gnss {
+		compatible = "globaltop,pa6h";
+		vcc-supply = <&reg_gnss>;
+		current-speed = <9600>;
+	};
+};
+
+&uart3 { /* SMC */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 { /* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_hub>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	dr_mode = "otg";
+	snps,dis_u3_susphy_quirk;
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		typec_hs: endpoint {
+			remote-endpoint = <&usb_con_hs>;
+		};
+	};
+
+	port@1 {
+		reg = <1>;
+
+		typec_ss: endpoint {
+			remote-endpoint = <&usb_con_ss>;
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* Microchip USB2642 */
+	hub@1 {
+		compatible = "usb424,2640";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mass-storage@1 {
+			compatible = "usb424,4041";
+			reg = <1>;
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	power-supply = <&reg_vdd_1v8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_wifi_3v3>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, back to index

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-31  8:27 [PATCH v5 1/3] arm64: dts: Add a device tree for the Librem 5 phone Martin Kepplinger
2020-07-31  8:27 ` [PATCH v5 2/3] MAINTAINERS: Add Purism Librem 5 section to the list Martin Kepplinger
2020-07-31  8:27 ` [PATCH v5 3/3] dt-bindings: arm: fsl: Add the librem 5 phone Martin Kepplinger
2020-07-31 19:35   ` Rob Herring
2020-08-01 10:56     ` Martin Kepplinger
2020-08-13  6:51 ` [PATCH v5 1/3] arm64: dts: Add a device tree for the Librem " Martin Kepplinger
2020-08-20 22:01 ` Fabio Estevam

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git