Re: [PATCH 3/6] arm64: dts: ti: Add Support for J721E SoC

[Suman Anna <s-anna@ti.com>]

Hi Nishanth, Tero,

On 5/22/19 11:19 AM, Nishanth Menon wrote:
> The J721E SoC belongs to the K3 Multicore SoC architecture platform,
> providing advanced system integration to enable lower system costs
> of automotive applications such as infotainment, cluster, premium
> Audio, Gateway, industrial and a range of broad market applications.
> This SoC is designed around reducing the system cost by eliminating
> the need of an external system MCU and is targeted towards ASIL-B/C
> certification/requirements in addition to allowing complex software
> and system use-cases.
> 
> Some highlights of this SoC are:
> * Dual Cortex-A72s in a single cluster, three clusters of lockstep
>   capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA),
>   C7x floating point Vector DSP, Two C66x floating point DSPs.
> * 3D GPU PowerVR Rogue 8XE GE8430
> * Vision Processing Accelerator (VPAC) with image signal processor and Depth
>   and Motion Processing Accelerator (DMPAC)
> * Two Gigabit Industrial Communication Subsystems (ICSSG), each with dual
>   PRUs and dual RTUs
> * Two CSI2.0 4L RX plus one CSI2.0 4L TX, one eDP/DP, One DSI Tx, and
>   up to two DPI interfaces.
> * Integrated Ethernet switch supporting up to a total of 8 external ports in
>   addition to legacy Ethernet switch of up to 2 ports.
> * System MMU (SMMU) Version 3.0 and advanced virtualisation
>   capabilities.
> * Upto 4 PCIe-GEN3 controllers, 2 USB3.0 Dual-role device subsystems,
>   16 MCANs, 12 McASP, eMMC and SD, UFS, OSPI/HyperBus memory controller, QSPI,
>   I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals.
> * Two hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL
>   management.
> * Configurable L3 Cache and IO-coherent architecture with high data throughput
>   capable distributed DMA architecture under NAVSS
> * Centralized System Controller for Security, Power, and Resource
>   Management (DMSC)
> 
> See J721E Technical Reference Manual (SPRUIL1, May 2019)
> for further details: http://www.ti.com/lit/pdf/spruil1
> 
> Signed-off-by: Nishanth Menon <nm@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 202 ++++++++++++++++++
>  .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi      |  72 +++++++
>  arch/arm64/boot/dts/ti/k3-j721e.dtsi          | 176 +++++++++++++++
>  3 files changed, 450 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
>  create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
>  create mode 100644 arch/arm64/boot/dts/ti/k3-j721e.dtsi
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> new file mode 100644
> index 000000000000..d42912044a5d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> @@ -0,0 +1,202 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for J721E SoC Family Main Domain peripherals
> + *
> + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
> + */
> +
> +&cbass_main {
> +	msmc_ram: sram@70000000 {
> +		compatible = "mmio-sram";
> +		reg = <0x0 0x70000000 0x0 0x800000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0x0 0x70000000 0x800000>;
> +
> +		atf-sram@0 {
> +			reg = <0x0 0x20000>;
> +		};
> +	};
> +
> +	gic500: interrupt-controller@1800000 {
> +		compatible = "arm,gic-v3";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +		#interrupt-cells = <3>;
> +		interrupt-controller;
> +		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
> +		      <0x00 0x01900000 0x00 0x100000>;	/* GICR */
> +
> +		/* vcpumntirq: virtual CPU interface maintenance interrupt */
> +		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +
> +		gic_its: gic-its@18200000 {
> +			compatible = "arm,gic-v3-its";
> +			reg = <0x00 0x01820000 0x00 0x10000>;
> +			socionext,synquacer-pre-its = <0x1000000 0x400000>;
> +			msi-controller;
> +			#msi-cells = <1>;
> +		};
> +	};
> +
> +	smmu0: smmu@36600000 {
> +		compatible = "arm,smmu-v3";
> +		reg = <0x0 0x36600000 0x0 0x100000>;
> +		interrupt-parent = <&gic500>;
> +		interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
> +			     <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>;
> +		interrupt-names = "eventq", "gerror";
> +		#iommu-cells = <1>;
> +	};
> +
> +	secure_proxy_main: mailbox@32c00000 {
> +		compatible = "ti,am654-secure-proxy";
> +		#mbox-cells = <1>;
> +		reg-names = "target_data", "rt", "scfg";
> +		reg = <0x00 0x32c00000 0x00 0x100000>,
> +		      <0x00 0x32400000 0x00 0x100000>,
> +		      <0x00 0x32800000 0x00 0x100000>;
> +		interrupt-names = "rx_011";
> +		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	main_pmx0: pinmux@11c000 {
> +		compatible = "pinctrl-single";
> +		/* Proxy 0 addressing */
> +		reg = <0x0 0x11c000 0x0 0x2b4>;
> +		#pinctrl-cells = <1>;
> +		pinctrl-single,register-width = <32>;
> +		pinctrl-single,function-mask = <0xffffffff>;
> +	};
> +
> +	main_uart0: serial@2800000 {
> +		compatible = "ti,j721e-uart", "ti,am654-uart";
> +		reg = <0x00 0x02800000 0x00 0x100>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
> +		clock-frequency = <48000000>;
> +		current-speed = <115200>;
> +		power-domains = <&k3_pds 146>;
> +		clocks = <&k3_clks 146 0>;
> +		clock-names = "fclk";
> +	};
> +
> +	main_uart1: serial@2810000 {
> +		compatible = "ti,j721e-uart", "ti,am654-uart";
> +		reg = <0x00 0x02810000 0x00 0x100>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
> +		clock-frequency = <48000000>;
> +		current-speed = <115200>;
> +		power-domains = <&k3_pds 278>;
> +		clocks = <&k3_clks 278 0>;
> +		clock-names = "fclk";
> +	};
> +
> +	main_uart2: serial@2820000 {
> +		compatible = "ti,j721e-uart", "ti,am654-uart";
> +		reg = <0x00 0x02820000 0x00 0x100>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
> +		clock-frequency = <48000000>;
> +		current-speed = <115200>;
> +		power-domains = <&k3_pds 279>;
> +		clocks = <&k3_clks 279 0>;
> +		clock-names = "fclk";
> +	};
> +
> +	main_uart3: serial@2830000 {
> +		compatible = "ti,j721e-uart", "ti,am654-uart";
> +		reg = <0x00 0x02830000 0x00 0x100>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
> +		clock-frequency = <48000000>;
> +		current-speed = <115200>;
> +		power-domains = <&k3_pds 280>;
> +		clocks = <&k3_clks 280 0>;
> +		clock-names = "fclk";
> +	};
> +
> +	main_uart4: serial@2840000 {
> +		compatible = "ti,j721e-uart", "ti,am654-uart";
> +		reg = <0x00 0x02840000 0x00 0x100>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
> +		clock-frequency = <48000000>;
> +		current-speed = <115200>;
> +		power-domains = <&k3_pds 281>;
> +		clocks = <&k3_clks 281 0>;
> +		clock-names = "fclk";
> +	};
> +
> +	main_uart5: serial@2850000 {
> +		compatible = "ti,j721e-uart", "ti,am654-uart";
> +		reg = <0x00 0x02850000 0x00 0x100>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
> +		clock-frequency = <48000000>;
> +		current-speed = <115200>;
> +		power-domains = <&k3_pds 282>;
> +		clocks = <&k3_clks 282 0>;
> +		clock-names = "fclk";
> +	};
> +
> +	main_uart6: serial@2860000 {
> +		compatible = "ti,j721e-uart", "ti,am654-uart";
> +		reg = <0x00 0x02860000 0x00 0x100>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
> +		clock-frequency = <48000000>;
> +		current-speed = <115200>;
> +		power-domains = <&k3_pds 283>;
> +		clocks = <&k3_clks 283 0>;
> +		clock-names = "fclk";
> +	};
> +
> +	main_uart7: serial@2870000 {
> +		compatible = "ti,j721e-uart", "ti,am654-uart";
> +		reg = <0x00 0x02870000 0x00 0x100>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
> +		clock-frequency = <48000000>;
> +		current-speed = <115200>;
> +		power-domains = <&k3_pds 284>;
> +		clocks = <&k3_clks 284 0>;
> +		clock-names = "fclk";
> +	};
> +
> +	main_uart8: serial@2880000 {
> +		compatible = "ti,j721e-uart", "ti,am654-uart";
> +		reg = <0x00 0x02880000 0x00 0x100>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
> +		clock-frequency = <48000000>;
> +		current-speed = <115200>;
> +		power-domains = <&k3_pds 285>;
> +		clocks = <&k3_clks 285 0>;
> +		clock-names = "fclk";
> +	};
> +
> +	main_uart9: serial@2890000 {
> +		compatible = "ti,j721e-uart", "ti,am654-uart";
> +		reg = <0x00 0x02890000 0x00 0x100>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
> +		clock-frequency = <48000000>;
> +		current-speed = <115200>;
> +		power-domains = <&k3_pds 286>;
> +		clocks = <&k3_clks 286 0>;
> +		clock-names = "fclk";
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> new file mode 100644
> index 000000000000..b72e033fa159
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> @@ -0,0 +1,72 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for J721E SoC Family MCU/WAKEUP Domain peripherals
> + *
> + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
> + */
> +
> +&cbass_mcu_wakeup {
> +	dmsc: dmsc@44083000 {
> +		compatible = "ti,k2g-sci";
> +		ti,host-id = <12>;
> +
> +		mbox-names = "rx", "tx";
> +
> +		mboxes= <&secure_proxy_main 11>,
> +			<&secure_proxy_main 13>;
> +
> +		reg-names = "debug_messages";
> +		reg = <0x00 0x44083000 0x0 0x1000>;
> +
> +		k3_pds: power-controller {
> +			compatible = "ti,sci-pm-domain";
> +			#power-domain-cells = <1>;
> +		};
> +
> +		k3_clks: clocks {
> +			compatible = "ti,k2g-sci-clk";
> +			#clock-cells = <2>;
> +			ti,scan-clocks-from-dt;
> +		};
> +
> +		k3_reset: reset-controller {
> +			compatible = "ti,sci-reset";
> +			#reset-cells = <2>;
> +		};
> +	};
> +
> +	wkup_pmx0: pinmux@4301c000 {
> +		compatible = "pinctrl-single";
> +		/* Proxy 0 addressing */
> +		reg = <0x00 0x4301c000 0x00 0x178>;
> +		#pinctrl-cells = <1>;
> +		pinctrl-single,register-width = <32>;
> +		pinctrl-single,function-mask = <0xffffffff>;
> +	};
> +
> +	wkup_uart0: serial@42300000 {
> +		compatible = "ti,j721e-uart", "ti,am654-uart";
> +		reg = <0x00 0x42300000 0x00 0x100>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
> +		clock-frequency = <48000000>;
> +		current-speed = <115200>;
> +		power-domains = <&k3_pds 287>;
> +		clocks = <&k3_clks 287 0>;
> +		clock-names = "fclk";
> +	};
> +
> +	mcu_uart0: serial@40a00000 {
> +		compatible = "ti,j721e-uart", "ti,am654-uart";
> +		reg = <0x00 0x40a00000 0x00 0x100>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
> +		clock-frequency = <96000000>;
> +		current-speed = <115200>;
> +		power-domains = <&k3_pds 149>;
> +		clocks = <&k3_clks 149 0>;
> +		clock-names = "fclk";
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
> new file mode 100644
> index 000000000000..e7c366c98ce1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
> @@ -0,0 +1,176 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for J721E SoC Family
> + *
> + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/pinctrl/k3.h>
> +
> +/ {
> +	model = "Texas Instruments K3 J721E SoC";
> +	compatible = "ti,j721e";
> +	interrupt-parent = <&gic500>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	aliases {
> +		serial0 = &wkup_uart0;
> +		serial1 = &mcu_uart0;
> +		serial2 = &main_uart0;
> +		serial3 = &main_uart1;
> +		serial4 = &main_uart2;
> +		serial5 = &main_uart3;
> +		serial6 = &main_uart4;
> +		serial7 = &main_uart5;
> +		serial8 = &main_uart6;
> +		serial9 = &main_uart7;
> +		serial10 = &main_uart8;
> +		serial11 = &main_uart9;
> +	};
> +
> +	chosen { };
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		cpu-map {
> +			cluster0: cluster0 {
> +				core0 {
> +					cpu = <&cpu0>;
> +				};
> +
> +				core1 {
> +					cpu = <&cpu1>;
> +				};
> +			};
> +
> +		};
> +
> +		cpu0: cpu@0 {
> +			compatible = "arm,cortex-a72";
> +			reg = <0x000>;
> +			device_type = "cpu";
> +			enable-method = "psci";
> +			i-cache-size = <0xC000>;
> +			i-cache-line-size = <64>;
> +			i-cache-sets = <256>;
> +			d-cache-size = <0x8000>;
> +			d-cache-line-size = <64>;
> +			d-cache-sets = <128>;
> +			next-level-cache = <&L2_0>;
> +		};
> +
> +		cpu1: cpu@1 {
> +			compatible = "arm,cortex-a72";
> +			reg = <0x001>;
> +			device_type = "cpu";
> +			enable-method = "psci";
> +			i-cache-size = <0xC000>;
> +			i-cache-line-size = <64>;
> +			i-cache-sets = <256>;
> +			d-cache-size = <0x8000>;
> +			d-cache-line-size = <64>;
> +			d-cache-sets = <128>;
> +			next-level-cache = <&L2_0>;
> +		};
> +	};
> +
> +	L2_0: l2-cache0 {
> +		compatible = "cache";
> +		cache-level = <2>;
> +		cache-size = <0x100000>;
> +		cache-line-size = <64>;
> +		cache-sets = <2048>;
> +		next-level-cache = <&msmc_l3>;
> +	};
> +
> +	msmc_l3: l3-cache0 {
> +		compatible = "cache";
> +		cache-level = <3>;
> +	};
> +
> +	firmware {
> +		optee {
> +			compatible = "linaro,optee-tz";
> +			method = "smc";
> +		};
> +
> +		psci: psci {
> +			compatible = "arm,psci-1.0";
> +			method = "smc";
> +		};
> +	};
> +
> +	a72_timer0: timer-cl0-cpu0 {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
> +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
> +	};
> +
> +	pmu: pmu {
> +		compatible = "arm,armv8-pmuv3";
> +		/* Recommendation from GIC500 TRM Table A.3 */
> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	cbass_main: interconnect@100000 {
> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
> +			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
> +			 <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
> +			 <0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */
> +			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
> +			 <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
> +			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/
> +			 <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
> +			 <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */
> +			 <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */
> +			 <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>, /* C66_1 */
> +			 <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */
> +			 /* MCUSS_WKUP Range */
> +			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
> +			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
> +			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
> +			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
> +			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
> +			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
> +			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
> +			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
> +			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
> +			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
> +			 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
> +			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>,

minor nit, can we have this MSMC RAM range line moved to before the
MCUSS_WKUP comment since it doesn't belong to the MCUSS range. Perhaps
can be fixed up while applying the patch.

Other than that, everything looks good.

Reviewed-by: Suman Anna <s-anna@ti.com>

regards
Suman

> +			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
> +			 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
> +
> +		cbass_mcu_wakeup: interconnect@28380000 {
> +			compatible = "simple-bus";
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
> +				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
> +				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
> +				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
> +				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
> +				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
> +				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
> +				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
> +				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
> +				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
> +				 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
> +				 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
> +				 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/
> +		};
> +	};
> +};
> +
> +/* Now include the peripherals for each bus segments */
> +#include "k3-j721e-main.dtsi"
> +#include "k3-j721e-mcu-wakeup.dtsi"
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel